High Temperature Tape, 4 inch (100mm) X 108 FT (33M) Polyimide Resistant Tape Silicone Adhesive for 3D Print Platform, Soldering,

nice tape will buy more when needed odd that it did not come in a box like the other roll i bought a long time ago. I dont use it much but when needed i have it at least

I can't comment as to how heat resistant it was, but it peeled, cut, and stuck well and didn't tear easily. The 4" wide roll is excellent for sealing battery packs.

This stuff is a nightmare to get reliably on your print bed. Bubbles, sticking, tearing with the slight breeze, then trying to get off your print without tearing. Even with wet adhesion. Just find a better build plate. Don't torture yourself dealing with this for 3d printing.

Works great, excellent for building battery packs.

This tape is a great addition to any 3D printing toolkit. I've often found it challenging to achieve good printbed adhesion with PETG filament, but this tape makes it easy - no more glue stick or hair spray. Filament sticks nicely to this tape (wipe it with isopropyl alcohol if you touched the surface during application), and prints end up with a smooth and glossy finish on the bottom.It takes a little practice to lay down a thin tape of this size without bubbles or creases, but the strong silicone adhesive allows for repositioning multiple times if needed. This 6"-wide roll is big enough to handle most prints with a single strip of tape, and of course you can lay a couple strips side-by-side for the largest jobs.Overall, this tape is definitely worth a try if you have trouble with bed adhesion on your 3D printer (and have ruled out other issues such as leveling). Highly recommended.

Sometimes I need a little heat protection on some work surfaces, so the TXINLEI High Temperature Tape has worked well for that. It's also good to line areas that need some extra protection from heat. I like the 6" size, as it can be cut easily for smaller sizes. It's a great value for the quantity and surface-coverage from a single roll. I recommend this for the unique applications where there are few materials available, the ease-of-use and generous quantity in the roll. Thanks for reading my review. I hope my experience is helpful to you and you kindly will click the button below.

Most people are using this for their 3D printers to add a barrier to the table for quick release... and it works great for that. Kapton was originally invented as an electrical barrier in circuits and is used widely to insulate PC boards... and this roll works great for that as well. I am using to electrically insulate elements on a PC board without issue. And the price is right on!

While this heat tape doesn't stick to some surfaces, like metal, as well as I would like, it is doing a great job lining my 3d printer glass plate. It doesn't make PETG quite stick like magic, as some say, but it has helped a lot and the only thing I have been able to get PETG to stick to at all (including painter's tape). The thinner tapes are useful to wrap the heat block, and snug on my silicone boot as well.