Zeikos ZE-HC36 Deluxe Medium Hard Shell Case With Extra Padding Foam For Cameras - Travel, and Storage Case Camera, Gear, Equipment, and Lenses - Canon, Nikon, Sony Alpha and Many More DSLR Cameras

Quedaron perfecto para mis módulos de micrófonos inalámbricos con sus respectivos eliminadores y antenas. Dos Audix de 20 x 21 cm, 3 Sennheiser de 20 x 13 cm y 1 AKG mini dual con sus dos body pack.

Super happy with the purchase. Got it with a bargain deal and this case is beyond my expectation. It's lightweight but sturdy, with plenty of rooms for all my Nikon lens. I can fit 7 lens and still got spare for my Z6 and Z5 bodies. Somebody in comments saying the case is not sealed properly which is not true, at least not in my case. When closed everything inside stay where they are without any movement. The handle in the back makes the case a bit unstable when laying flat, but once you put weight it stables. Wish they could hide the handle inside but it'll increase the overall dimension so it's a trade off. Overall a great buy. Now my camera gears finally got a home.

This Zeikos "Medium Hard Case" is reasonably tough and is able to provide a decent amount of protection to items secured inside. The case has a roomy foam interior, roughly 17" x 11.5" x 5", that can be customized to accommodate equipment by removing pieces of the pre-scored block. The sides of the case are fairly strong and can take a good bit of abuse, but it isn't as strong as other professional cases I have seen. It also isn't as expensive as those other cases.The case also comes with a total of five dividers (2 long and 3 shorter) to section off areas, a good quality removable carrying strap, and a set of keys. The locks are not the highest quality and are really the only thing that is lacking in quality on the case.Overall, this is a good quality case and a good value.Highly Recommended!CFH

Here's what you get in the box:* Hardside Case w/ handle & wheels (all pre-assembled)* Nylon Strap* 6 Hard-board, foam covered, slotted Dividers: > 2 long dividers > 2 medium dividers > 2 short dividers* 3 layers of foam: > 3" perforated, pre-diced foam sheet (this is the layer you make your custom cutouts in...) > 2" solid foam sheet (this is untouched, NOT perforated) > 1/2" solid foam sheet (this is thin and is also untouched, NOT perforated)Fit & Finish:* The exterior is finished in a plastic/vinyl like material. The color is more like a flat gun metal black almost gray.* The edges & corners are reinforced with aluminum type metal. They are fashioned with typical punch rivets.* The hinges for the lid seem to made of steel, although not the highest grade.* The locks are the typical brief-case/luggage style locks. They do the job to keep the lid closed, but I wouldn't rely on them to keep a thief out!* The hand is a mix of metal, plastic, & synthetic leather.* The wheel assembly is mostly plastic and is attached to the case with screws. The only metal part is the extendable handle - the actual handle assembly is plastic.Form & Function:I would not classify this case as "road-worthy", meaning if you are looking for a case that can take a beating and withstand very rough handling, then look elsewhere - this case will not last under abusive conditions. However, if you are looking for a case to keep your gear organized and give the illusion of professionalism for a bargain, then this is the case for you.I think the case will handle the occasional drop and mishandling, but I fear it will begin show that kind of wear-and-tear quickly. But, if cared for, you'll get some pretty good mileage out of it.I'm not using the "dividers" so I can not comment on how well the work. I can say that they are consistent with the rest of case as far as value and construction.Now for the important stuff - customizing the foam inserts...1) I did not expect the 3 layers of foam, of which, only 1 is perforate, pre-diced. All 3 are removable. (Be careful not to pull up the foam backing that's covering the bottom of the case - it is the same foam as the 1/2" blanket/layer...)2) The perforations run the whole depth of the 3" layer. So, when you start pulling the squares out to form your custom inserts, you can NOT customize how deep you need them. If wanted, you can try to cut them at the point where you want the depth to be, but I found it easier to just remove the entire section - remember, this layer is only about 3" thick anyway...3) The 2" solid layer is removable and is laying under the 3" perforated layer. (I actually had to cut a custom insert section in this layer as well to accommodate a bigger item...)4) The 1/2" layer is like blanket that originally lay on top of the 3" perforated layer. I've since relocated it to the bottom under the 2" layer - so that means from the bottom up, the layers are: 1/2", then 2", and 3" at the top, obviously to expose the custom inserts.Summary:The case is a really good value. For the size, the customizable foam layers, and numerous dividers, you really get a great value for your money. Keep in mind that the case is NOT built for a rugged/rough adventure, but rather for customized organization, protective storage, and transportation of your precious equipment. I highly recommend this for amateurs & semi-pros looking to get the most bang-for-your-buck, for this I give it 5-stars!Remember! "Measure twice. Cut once."

Tengo un año utilizando el maletín todos los días y me ha funcionado de maravilla. Protege muy bien los objetos del interior debido a que tiene acojinado en todo el interior y ademas tiene una espuma pre-cortada que puedes hacer del tamaño que desees. De verdad muy funcional y duradero. No le doy 5 estrellas por que una argolla lateral para sujetar la correa se empezó a desprender y tuve que dejar de usar la correa y cargarlo siempre con la manija, no es un gran problema pero siento que utilizando un material un poco mas duradero estaría mejor.En fin, no me arrepiento de la compra y hasta creo que de ser necesario otro maletín, compraría el mismo.