CONCRETE COUNTERTOP/WORKTOP SEALER | FOOD SAFE | HIGH TEMP | MATT FINISH | WATERPROOF | UV RESISTANT (1 Litre)

Followed the instructions, super simple, did exactly what it said on the bottle and it only took a few coats to pass the water drop test. It absorbs less sealer with each coat as it becomes more waterproof and so I still have a good amount left for future coats. Chose it because other reviewers said it doesn’t leave streak marks and it really doesn’t. Super easy to apply and very happy with the smooth and natural look!

Very impressed, I took a smoking hot skillet straight off the bbq and placed it on the back corner of the worktop at first just to be sure that if it did burn the surface it would be a little out of sight. And lo and behold I didn’t get any burn marks. First I left it there for about 5 seconds then checked it, then 30 and checked it, then 15 minutes or so until the meat finished cooking and there were no burn marks at all and still just as waterproof.Also super easy to apply and seems to dry nice and quickly in these hot weather conditions so I could put the next coat on straight after the previous and got the job done in approx 30 minutes.

I have tried this and it seems to be working well. It seals my granite worktop and it means it does not take up colours of food or papers.

I made a concrete dining table 3ft x 7ft and used this to seal it. Took 3 coats that were very fast drying, on the third coat it was barely absorbing the sealer as it went waterproof so I was just spreading it around the table.It didn't change the appearance of the concrete so I was happy with that. I thought it was very expensive for the size when it arrived but I used less than a quarter of the bottle so I have plenty to use for future projects. I would recommend this to someone looking for a food safe concrete sealer.

Finally found a non-toxic sealer that doesn’t leave streak marks and gives a natural finish! Worth the money and goes a long way. We used this for our bathroom countertop and still have enough to re-coat in the future. Going to give this a go on marble too as we’d like to find a durable sealer to coat natural marble in our the bathroom.

Evaporates and absorbs into the concrete before doing much to seal the surface. I applied to this microcement and after 5 coats it still releases residues and it’s not waterproof. Picked this product as food grade; now I know it’s safe because it vanishes away!

We used 5 coats on our polished concrete bathroom sink/countertop just to be sure that it would be fully sealed and the surface became extremely water repellent! It was really easy to apply and didn't leave any streak marks at all. After the first coat, it gets progressively more difficult for the sealer to soak up into the concrete and by the third coat, it was pretty much just sitting on top of the surface but we continued with a couple more coats just to be sure. All in all it took 45 minutes to apply, including the wait time. It worked really well. Great product - thank you!

Very disappointed in the quality of this product given such high reviews. Maybe I had a dud but despite the most meticulous attempts to prevent streaks from application when each coat dried there were white deposits which have never gone. I will be trying to contact H Seal for a replacement but now I’m going to have to re-sand and start again!

Gives a nice finish, but does not seal at all. Applied 6 coats, exactly as described, and any liquid -oily or watery- that stays on the counter more that a minute will go right through the sealer into the concrete. Bad product and then you're stuck with it

Did 5 coats on our cultured stone fireplace hearth. It did not change the color at all, did gave it a slight Sheen to it but nothing close to a wet look. Super happy with it. It repels water really well and I’m able to wipe the black soot and ash away without leaving stains on the stone or grout. Definitely worth the price and I still have a half a bottle left. Area was about 5’ x 5’.

Tried this for the first time instead of Cheng and it came out really nice. Was really easy to get a consistent finish without any streak marks and only needed 3 coats before it passed the water drop test, and still have some left over for more projects. It seems like less sealer gets absorbed into the surface as it becomes more waterproof with each coat, so it uses less and less sealer with each consecutive coat. I usually try to finish polishing my projects to 1500 grit and this soaked up into the surface really well even at that level of smoothness. The surface is now super hydrophobic and has a really nice natural matte finish!Very happy, thank you.

I spent a considerable amount of time reviewing concrete countertop sealers and came up with this or Cheng's. I went with this one based on its ability to withstand heat. I sanded my countertops down to 1000 grit then applied this with a 4" high density foam roller. The instructions say 2-3 coats, but I applied closer to 8-10 coats. The concrete continued to absorb coat after coat. Only until I hit about coat #7 did it appear the concrete was not readily absorbing the liquid and that it was drying in an even manner on the countertop. I did another coat or 2, then did the water test suggested in the Cheng's video to ensure complete absorption of the sealer. I hope this helps someone - 2-3 coats were totally inadequate in my application (I poured my countertops using Rapid-Set mortar mix, not sure if that matters).I was disappointed with the lack of instructions, and there isn't much additional instruction material on their website or youtube. I have been doing concrete for 20 years, although new to concrete countertops, so I have a familiarity with concrete. Not sure of the other reviewers applying this in 30 minutes - it took me about 4 1/2 hours of total application time and dry time to completely seal the countertop.I will revise my review after I have

Didn't work well at all, we had to use epoxy