Master Airbrush Brand Airbrush Fitting Conversion Adapters for Paasche, Badger & Aztec Airbrushes; Converts Threads Size to 1/8" BSP Size Threads; Hose Adapter Connector; Airbrush Guide Card

These adapters helped me attach my Paasche hose to an off brand airbrush. I purchased a Fantasy Tan airbrush kit from the auction site and it came with a tiny hose. It was not long enough to reach the spray area I was in. It's a nice airbrush but had the smallest connectors,I had no idea what adapters would fit it. It turns out that the Badger adapter fit it perfectly to my Paasche hose. The airbrush was nice enough and cheap enough to spend a little extra money on it. The adapter had a small female connector with a larger male threaded end and it worked out great. I couldn't be happier with this set and makes me feel confident in trying out different airbrushes and hoses in the future to go on my Paashe compressor. I also wanted to point out that TCP Global sent this set out extremely fast!! I would definitely purchase from them again in the future!

This helped me get my badger to work with the hose I bought. Great product but leaks a little.. Thats kind of to be expected with fittings on fittings and doesn't leak enough to really make a difference.

Edit 5/13/16 I have updated my product rating to this item from 1 to 4 stars purely based around the customer service provided by TCP Global. After receiving the initial shipment, I described the problems to them, and they immediately shipped out a replacement Paasche adapter. Unfortunately the second one turned out even worse than the first one, and would not thread on to either the airbrush or the air hose properly. I assumed this would be the end of it, and after doing extensive searching discovered that this is basically the only adapter of its kind that anybody makes. I contacted TCP Global again, and they offered to hand test an adapter at their location first before sending it to me. When this one arrived, clearly marked as tested with a date of testing, I was able to confirm that it worked correctly. I cannot give this product a 5 star rating because of the complications that arose from getting a functional adapter for the Paasche airbrush, but can highly recommend TCP Global as a seller. My original review is below for completeness. Original review: Of the three adapters in this set, two would thread onto the 1/8" air hose correctly, but the one that I needed - the Paasche adapter - will not thread more than a quarter turn. No obvious signs of wear or physical defect on the adapter, but it does not work. I have contacted the seller to see if there is anything they can do before I return these for a refund.

The description specifically said that an adapter would fit my PAASCHE airbrush. As you can see in the photo, none of them do. Getting a refund.

This item contained the adapter I needed for a Badger airbrush. It fit and met my needs but required a lot of PTFE tape to seal the threads to stop up leaks through the threads. If have two extra adapters, in my tool box now, should I purchase a different model airbrush.

I'm using the Master Airbrush Compressor Model TC-96T and a very old Aztek airbrush (circa 1990's) – this set of connectors worked perfectly to connect my Aztek brush to the Compressor. No issues so far!

I bought and returned 2 of these for the same issue. Of the 3 in the set, only 1 or 2 at max would screw onto my Master Airbrush brand hose. The first time I bought it, only the Paasche connector wouldn't fit (which is the only one I needed.) The second time, both the Paasche and next size down wouldn't fit. Im sure I could get them on if I used a wrench or some other tool.. but Im not going to attempt to strip my perfectly good hose connector for this. I know there is no issue with my hose, because some of the connectors do fit, plus the hose connects to my Iwata just fine. The machining on these threads is complete garbage. There needs to be some form of quality control.

If you buy the master compressor with hose this is the part needed to connect them either directly or to a TF-117 quick release it includes one each of the listed adapters 1 Badger 1 Aztek 1 Paasche. Works Great.