YESWELDER 60 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

Perfect fit and durable, these parts provide excellent performance for plasma cutting. The set is well-packaged, and everything works flawlessly. A great value for the price. Highly recommended

I was only needing the tips, but this total package was as cheap as others were selling tips only. Great deal. Won't have to repeat buy for quite some time.

1

I don’t think this unit could be any more cheaply made without being useless BUT mine really works well. I tried it on 110VAC -20 amp circuit cutting up an old 70’s steel wood burning stove and it worked slow but okay, but tripped the circuit breaker a few times. I hooked it to a 220VAC 30 amp circuit and it’s worked better, still slow but reliably. I set the air compressor to 35psi to blow more slag off the cuts but even at 50 amps cutting 1/8” steel it moved about an inch in 20-30 seconds. I was told that moisture in the air compressor contributed to the dripping slag on the edge of the cut and there is a water collector on the unit but either to my inexperience or something in the unit, it has trouble cutting consistently and cleanly. It really should come with a roller guide for guys like me who are new to plasma cutting. There was no discernible model number or manufactured on the plasma cutter so I guessed which roller guide would fit - I guessed wrong but the seller was prompt and helpful telling me the cutters model number and which roller fit it (see below). Well… it “sorta” fits. The clamping screws land on the ceramic insulator and will crack it if tightened. When it arrived some of the LED display segments didn’t work but for the price it wasn’t worth trying to get a replacement. The instructions are typical choppy English and don’t describe enough so I had to look at instructions on other cheap cutters to get help. There was no instructions on the “S” knob. It’s the delay for setting how long the air continues blowing through the nozzle after you stop cutting. I just set it to max.It is a fun little unit for seeing if plasma cutting is for you but if your are serious about owning one, I would figure on popping more like $600 - $2000 for a nice one.Plasma Cutting PT-31 Roller Guide Wheel Spacer Stand-off for Plasma Cutter Torch CUT40 CUT50D LGK40 LG40, Copper, PT-31 Roller Guide Size

Yeah I got bamboozled they said it was for a yes cutter but they don't fit my cut 65 be warned but all in all for the price point it's an awesome set if it was the right set LOL

My fear in ordering the YesWelder Plasma cutter was that I’d subsequently be stuck buying high priced or hard to find replacement consumables, but this set alleviated those concerns. This set of replacement pieces was very reasonably priced and should last me a long time - certainly long enough that I will not regret choosing the YesWelder. As for tech support, even before my plasma cutter arrived YesWelder sent me a message through Amazon about a possible problem and solution. As it turned out my unit did not have the problem but I was certainly happy that they were so proactive about fixing the potential problem.

These work great and are as expected.

These plasma cutter consumables are really good quality and fit perfectly. They're a great investment and I highly recommend them.