F80-G

Good quality. Sturdy

Good build quality, comes with all the accessories needed for both thin and thick monitors.

Feels durable and is extremely easy to assemble Wouldn't suggest any other arm at this price range

Absolutely amazing, good materials and works as advertised. Everything can be adjusted by hand if you screw not to tight and not too loose, just need to find a sweet spot. Only reason for 4 stars is the instructions for the Vesa mount are unclear. If you face the same issue use the two sizes of the plastic washers provided (one big and one small) as well as the 4 long screws. Then place the big washer between the monotor and back plate of the mount, pass the screw through and place the smaller washer between the mount back plate and screw head for additional support. The works for my monitors curved back and it provides very rigid support. The problem is that with the 2 lengths of scres and 2 sizes of wahser provided, you need to find a way to some how fit the monitor perfectly of the mount with no wiggle room while also making sure enough of the screw has been inserted into your monitor for support. Its a bit tedious but the end result is amazing and its definitely worth the money and the time.

Good

This is my second monitor arm from NB. I've been using the first one for over 3 years now, and it's still going strong. The initial setup can be a bit tedious, a few screws are tricky and require patience but once it's installed, you never have to touch it again. The build quality is excellent, and the adjustability (tilt, swivel, rotation) works smoothly. It does the job great and now my wires aren't getting tangled around my monitor stands anymore :D

افضل ستاند و مافي مشاكل

Great value for money very easy to setup

The item was delivered in less than 16 hours! It came with the fittings for both a grommet or an edge clamp. I went with the grommet. Installation was quick and easy with two gotchas - both not the fault of the item. The grommet diameter on my table was too large. I had to conjure up a wooden strip And drill a hole through it to fit correctly. Secondly, the instructions are just too tiny for my eyes so it took a bit of squinting to figure them out. Once installed, I had to tighten up the tension to hold my monitor down - as it kept spring back up to its maximum height. But that was documented in the instructions clearly. So, the mount is installed and the desk is free of clutter, and the monitor suspended mid air is quite stable. Good buy. Especially for the price!

Good for the price Looks pretty solid and the springs are good too. It's not too heavy and the materials are made of steel for the important part then plastic all the rest. The cable management not the best but do the job

⭐️⭐️⭐️⭐️⭐️ **Fantastic Monitor Mount** The NB North Bayou Monitor Mount is sturdy, smooth to adjust, and easy to install. It holds my screen securely and lets me position it exactly how I want with no wobble. Great build quality and value, highly recommend!!!

He comprado este soporte, porque el que viene con mi monitor es muy grande y me quita espacio para el teclado, con este he conseguido tener la mesa muy despejada. Nada más desenvolverlo se ve bien construido, y da confianza, por cierto si lo compráis, cuando lo desembaléis cuidado al retirar el velcro puesto que se despliega rápidamente por la acción del gas y puede golpearos la cara si lo tenéis cerca. Viene montado, de lo único que hay que preocuparse es de elegir que sistema de anclaje se quiere utilizar el del agujero a la mesa, o el de la pinza desde una esquina de la mesa, en mi caso, retiré los componentes de ambos sistemas de fijación y atornille directamente el soporte sobre la pared y ha quedado de cine. La maniobrabilidad del monitor una vez acoplado es una pasada se sitúa a la altura deseada sólo con un dedo, tiene una gran inclinación tanto hacia delante como hacia atrás, y el brazo se pliega fácilmente con dos manos, también se puede voltear el monitor en ambos sentidos quedando fijado en cualquier posición en cuanto no se le aplica fuerza. Tiene un sistema para ocultar los cables al que se logra acceder retirando 2 tapas mediante una llave de allen especial que se incluye, yo no lo he utilizado de momento porque tengo que hacerle un agujero a la mesa para pasar los cables primero. Una cosilla si cuando lo instalas observas que a cierta altura el peso del monitor vence al soporte, en este caso hay que apretar un poco el tornillo "central" del brazo (situado en lo que es el codo) con la citada llave de allen. La única pega que le veo es que las instrucciones sólo están en Inglés, Francés y Chino. Considero que ha sido una buena inversión los 30 euros que me han costado, lo recomiendo para el que quiera ganar espacio en la mesa, o el que tenga el típico soporte que se queda muy bajito. Saludos.

Aslında bu tür ürünlere pek de sıcak bakmam.Eski monitörümü değiştirirken fantezi amaçlı almıştım.Ama inanın monitörden daha fazla işlevsel olduğunu görüp hayret ettim.Konforumu hiç bu derece değiştireceğini beklemezdim.Tek olumsuz yanı sürekli hareket ettiriyor olmamdan dolayı(yani normal işlevini çok fazla kullanmamdan dolayı) acaba monitörüm zarar görür mü oldu.Montaj konusunda mengene yerine (masamın kenar boşluğu olmadığı için) vidalama sistemini kullandım.Bilmiyorum sabitleme seçenekli mi oluyor benzer ürünlerde ama küçük bir delikle montajı da halletmek çok hoşuma gitti.Kesinlikle hayatınıza konfor katacağı için tavsiye ediyorum.