maylit LED Strip Lights, 2M/6.56ft RGB LED Light Strip for 40 to 60in TV Lights Bias Lighting for TV Backlight with Remote, USB LED Light Strip for TV LED Backlight

Easy to install, very quick deliver and great product

This product is cheap and does not work. The remote did not work and the lights just flashed different colours. Was a waste of money, woupd have rather spent my money on something else.

Did not work at all even with a battery change

It wont stick properly. You need to get extra double side tape.

هذا المنتج لايغيير الالوان وذهبت الى محل اصلاح الالكترونيات وحاولو بكلالطرق بلا فائدة ورميته في القمامه

اسبوعين و يخرب

This product is not as mentioned in the pictures/description of the strip lights. It's a normal usb powered led light which you can probably find at half the price on Amazon

Okay these lights are pretty darn cool but there are some things that could make them better and some things you should know-- why? because the instructions are just meh.First, the package states that it has 3 rolls of the LED lights. Mines came in one. You can separate them and add the extra connectors that they've provided. Don't connect them immediately. Unravel the strip and put the USB into your tv. This will allow you to see where you want to place the light strips for the best effect. This is important because it will make the difference. The instructions for my 46 inch says to wrap but I actually placed mines on the sides of my tv. They aren't as discreet but you can only see them when you walk really close to the sides. This gave my tv the best lighting because my tv is mounted pretty high. I can't stress this enough because if I had placed the strips similar to the instructions then I would have thought these weren't bright. Everyone's tv to wall ratio is different.This may be common sense, but also install while in a dark room or dim lighting. Top of the morning is not going to give you the true effect of what it may look like and thus you may place the strips too far back on the tv or too far up depending on your wall to tv alignment.Once you've decided where, add the connectors one buy one leaving the end strand without a connector. I also kept the lights plugged in (idk if that's safe) to make sure that all of the lights were lighting appropriately. Glad I did because one of the connector strips didn't work and effected the light output. The first strip was pink, the other strips were blue. If you attach the adhesive first, then you will have to pull off, risking the strength of the stickiness, to put back on correctly. It's doable but not worth the hassle.The brightness adjustment on the remote matters. So I bought this because I wanted the pink light-- and solely the pink light. When I had the brightness all the way up, I could not see the different colors. I thought it was defective because even the pink color looked blue (which makes sense given color spectrum etc). So, make sure when you turn on the remote that you dim the brightness as much as possible so you can see all the colors.Now it's time to remove the adhesive! My adhesive was pretty darn good. The USB part also has an adhesive part. Make sure that you place the USB and adhesive to wear it is easy to pull out without messing with the adhesion (will make sense later).It is BRIGHT y'all. There is no "dim" feature. What I mean is although you can adjust the brightness, you cannot adjust the volume of light. By adjusting the brightness you are adjusting the color's brightness (ie from dark pink, to hot pink, to light pink) and not the light's strength/intensity. I thought i would be able to adjust the strength for nights that I don't necessarily want to feel the vibe but no. A minor flaw but I have a diffuser with a LED light so this doesn't necessarily bother me but may bother others. It's also $14 (at the time of this review) so I mean I couldn't ask for more.Here's what I DO NOT LIKE. There is technically no "off" position for the lights if your tv is on. If you turn "off" on the remote, the lights go red. It isn't until you turn the tv off (or power source) that the lights completely shut off. You can also take out the USB cord to cut the lights off while still keeping your tv on. This is why it's important to place the adhesive part of the USB cord where you can easily remove without having to mess up the adhesion. This is honestly minor but good to note when installing as to make sure the position of the USB is easily accessible and/or to appropriately place the lights for 24/7 viewing.All in all-- the product is great. The price point is great for what you get even with the "off" situation. The quality is also great. The color variations are great, as well. A couple reviewers stated that the white is not white but rather a blue and this is true. I would buy another just for keepsake-- that's how much I love them. It is definitely a vibe and elevates any room, any watching experience.

Just what my son wanted!

Let me start this review by saying that I'm not really going to discuss the technical merits of these lights because...well, they work. They turn on and off with the TV (if we so choose), and they turn on and off with the remote. There are lots of fun "effects," but we tend to leave it on the "gently changing color mode" (so it won't distract us from Moonshiners, or Gold Rush or Curse of Oak Island.) Our TV is 65", so I needed an additional strand of lights, but we love the way it lights up only what we want (and ignores the pesky cables running down the middle.)Anyway, back to the review: Since "everyone knows" pictures speak volumes, I asked hubby to snap 1 or 2 that show the effect of the lights around the TV...and he sent me 30. I'm not kidding...he became a regular cinematographer in there, even going so far as to VIDEO the lights (so you can see them change!) That's just how much he loves these silly things. Call it Christmas for the other 11 months, but they are a super fun (and cheap) investment that will bring you hours of good clean fun. Really.Oh, and the customer service people are delightful and responsive. I had a question for them and they responded by email within a day. What that means is...there's actually someone on the other end of this product!In terms of brightness, the photos are unretouched, meaning the brightness is what you get when the lights are out and the TV is on. They aren't so bright that they compete with the television picture for your attention, but they add a very nice glow that kicks viewing up a notch.The remote requires a traditional 2032 round battery and is super easy to access/change (not that we've had to change it yet, but we inspected the remote so we'd know what we'd need to do when the time comes!)In terms of application...it's a no-brainer. You just peel and stick. Done. If you make a mistake, you can reposition (as long as you don't wait too long) and the adhesive won't ruin your television. Of course, these stick to the back, so does it really matter?The picture in the product description doesn't do these justice...I'll just say that. You really can't go wrong on them, so just buy a set (or two) and light up your world.

Worked out nicely with our newly installed 85" Sony TV. Easy DIY: Peel and stick onto the back edge of TV. Plug for Light Test, then Cut excess between copper line. Plug to power and change color using remote. It's too bad the remote is not RF; thus, color changing and powering on/off does require in sight control.

The color gradually changes along the light strip. If I select a light blue / turquoise color it is the correct color at the beginning of the strip and a lot brighter then it gradually changes to a lighter and more green color. When I select white it does the same thing. Selecting colors like red or blue or green are consistent but I don’t like those colors as my back light. I’m not satisfied with this LED light strip.