DYNASTY PROAUDIO WSA-5TR-V2 Wireless Subwoofer Speaker Kit, 5.2G / 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching

This wireless subwoofer kit is amazing. My sub is approximately 20 feet away from my AVR and it works flawlessly. It synced up immediately, and the clarity hits every thump..

I've only had this for 2 days now, but this is amazing. I am using this for a 3rd subwoofer (The other 2 subwoofers are hard wired) I have on my Home Theater system and it works great. No latency to speak of. No sound issues. I am very impressed. Volume level and everything is about the same as when I had the subwoofer hard wired. I did re-calibrate my speakers to make sure all level were good between the 3 subwoofers, but that is expected. There are only 2 gripes I have; but they are minor and don't take away from the product. 1st: It would be better if they labeled TRANSMITTER and RECEIVER better on the units. When I first installed it, I accidentally put the receiver unit at my audio unit and the transmitter unit at the subwoofer. That obviously doesn't work having it backwards. I guess I was a little too excited and didn't read more carefully which unit said transmitter and which said receiver. 2nd: No where in the instructions does it say how to CHANGE the frequency from 5.8 ghz to 5.2 ghz. I have a very intensive wifi network and I did notice a small amount of interference with my network. It was small, but noticeable. No where could I find a switch or setting to change the units to 5.2 ghz. By default it connects on 5.8 ghz. And it pretty much auto connects out of the box, so I didn't have to do anything. But after a lot of research from people reviewing this item, I discovered that if you press AND HOLD the "Pair" button on the receiver unit, it will start blinking and then start blinking GREEN (Meaning 5.2 ghz). Then I press and held the "Pair" button on the transmitter and it too changed to GREEN (Meaning 5.2 ghz). So all is good now. I just wish they had this information in the instructions. I tested powering down the unit and when the power was restored, it stayed "GREEN" 5.2 ghz. So all in all, this is an excellent unit. My research shows that "internally" this unit is the exact same as the KEF KW1 wireless unit. Could be the 2 companies working together or getting it made from the same manufacturer. Either way, this unit works great; great price; lowest latency of all I have checked on. I should point out again, that I have only used this for a subwoofer. Technically it will work on ANY SPEAKER as long as it is a POWERED SPEAKER. So technically, you should be able to use it for surrounds or rears if you can't get wire there. But I can't comment on how good it will be. Specs say no problem with frequency response; but again I only use it for a subwoofer. I highly recommend it. If I run into any problems with this unit, I will definitely add a change to my review.

DYNASTY PROAUDIO WSA-5TR (Version 2) Wireless Subwoofer Speaker Kit works flawlessly as soon as hooked up. Forget wires to your Sub. Well worth the price. So other than the obvious reason of running wires why did I need this? This may be important for some. 10 years ago I built my home entertainment center around my Onkyo AV receiver. I built my 6.3 cu.ft Sub with a 12 inch Shiva driver and Dayton 500 watt plate amp. While the sub in a far corner away from the receiver I wired it by running an LFE cable up inside the wall (10 ft), 30 ft across the attic and dropped it down to the speaker (10ft). So 50 ft of cable was used. It did work and sounded great but every morning when I turned the system on the connection to the sub was gone. I got it back by removing the LFE cable connector to the sub and plugging it back in. It worked all day but each morning I had to again re-establish the sub connection. This went on through 2 more plate amps and two AV receivers over the next 8 years. With all these changes I felt it had to be the LFE cable but I was too old to go climbing back across the attic so lived with it. Then I learned about a line amplifier device. I thought maybe this could restore the signal strength at the end of the cable. Bought one from Amazon and hooked it up. Seemed to be doing its job as the signal adjustment knob would increase volume to the sub but the next morning the sub had again lost its signal and I had to again unplug and re-plug the cable to get it to work. Determined to solve this problem I learned of wireless Sub devices. I bought this unit, hooked it up and it immediately worked. So, only one more check. Would the Sub work in the morning. YES! Worked perfectly. Finally, an extremely easy solution. Maybe others with strange Sub signal issue will benefit from this information.

Overall, these work really well. I didn't want to run an RCA cable all the way to the back of my living room for my rear subwoofer these connect fast. I don't notice any delay and the sound quality is good. I do wish there was an option to turn the lights off as one of these is sitting in my entertainment center and the blue light is kind of bright. I do notice when there's nothing playing before the sub goes into standby mode. Sometimes it does have a hum with these but not noticeable while watching content.

I usually don't write reviews but felt compelled to here. I've had my klipsch subwoofer for several years and had it installed with the klipsch wireless sub kit. For several years now I've just lived with the constant bumping from my sub. I hated it but didn't want to have to hard wire it having to either go under the floor or in the ceiling. I was looking on the reviews for the klipsch sub kit to see if anyone had found a solution. One reviewer said he went to this kit and loved it. I should have done it years ago but didn't know about it. Loving my sub now with no constant bumping. Easy to install and just works. I'd give it 10 stars if I could.

These work great. I have an active subwoofer (Klipsch R-10SW NA) so I used 2 high quality rca cables instead of those supplied, and used one from one AV receiver (STR-AN1000) output to the white jack, and on the other end I went from the white jack into the subwoofer. You do need to spend a bit reading the specs on your receiver and sub to confirm LFE etc, but it is truly plug and play. No lags, clear sound, no complaints.

Good product. No delays in sound delivery. When I first set this up no sound could be heard. then I realised that there is a transmitter and a receiver. So be sure not to connect the transmitter to the subwoofer instead as they look identical.

Excelente!

works great for my subwoofer 20 feet away good quality a little pricy

One of the worst audio purchases I've ever made, I bought this to replace my SVS sound path single band wireless. The SVS works well but there were very occasional cut outs. I thought this one would be more reliable as it's two band. What I have experienced is non stop drop outs whatever band I use, and worse than that lots of clicks and pops which made us think someone was upstairs... What is more the phono sockets are the flimsiest I've ever encountered, when plugging a phono/RCA lead in it feels like the socket is about to break off. What a waste of money, feel ripped off and it's now past the return date by just a few days.

Worked straight out of the box. Haven't had any connection or noise issues in almost a year of daily use.