Question 1

If the dis has no power, is this item working properly? Thanks.

Accepted Answer

If you are using this for dish pointing you need a compass to get the direction. You should be able to get this info from your unit by entering the closest zip code in to your sat box. If you are using your sat. on a camper you can get a zip code directory at any office store. Now that you have your zip code enter it in the setup in your sat box setup program. Point the dish using your compass this will get you in the rite direction.You must us a one foot peace of the same type cable between the dish and signal meter. Then connect the cable to the other side going to the sat box. The power comes from the dish signal. So you have the dish, a 1 or 2 foot jumper cable (short piece cable) between the dish and line in on the signal box, the signal box, then connect the cable from the dish box tuner box that is used to change channels to the out side of the signal meter. Now all you have to do is rase the dish until you get a signal. If the signal is to strong back the signal down on the meter for fine tuning it. You don't want the signal to strong. Make it as week as you can well still getting a signal. This will help you pin point the sat.  Now once you have it tuned in. lock the dish in place. Remove the short cable and signal box and connect the cable from the sat box and you are done.  I hope this helps.

Question 2

Rm 4610 can this be upgraded to hd for directv ?

Accepted Answer

Don't know bout an upgrad but my experience with the signal meter is save your money. My burned out just using it once. When I tried to use again it was over the 1 month warranty.

Question 3

will this work with directtv swm satellite

Accepted Answer

It works with Dish and says it will work with Direct also, it is just a signal strength meter.  It has to have the receiver on for power but I did not like that so I took two 9volt batteries and an F type connector and made my own 18volt power supply.  Works just fine.

Question 4

How do I use the device

Accepted Answer

It's used in line with the receiver on. Rotate the dish facing the western sky until you get a strong signal. This only works with the older systems 18 volts or less. Newer systems use 22, 24 volts.

ASIN	B00NL4DYSC
Best Sellers Rank	#157,905 in Electronics ( See Top 100 in Electronics ) #31 in Satellite TV Dish Satellite Finders
Brand Name	AGPTEK
Color	Blue
Compatible Devices	Satellite Receiver
Customer Reviews	3.6 3.6 out of 5 stars (1,067)
Item Dimensions	5.12 x 2.36 x 3.15 inches
Manufacturer	BrainyTrade
Measurement Type	Decibel Meter
Minimum Operating Voltage	13 volts
Model	EC9B-BTS1
Number of Items	1
Part Number	EC9B-BTS1
Power Source	Battery Powered
Style Name	Compact
UPC	700697094930
Unit Count	1 Count

AGPtek Good For Campers Digital Satellite Signal Meter Finder Meter For Dish Network Directv FTA LCD Graphic Display Backlight Compass Buzzer Control

Details

Details

Description

Specifications

Common Questions