Deliver to Japan
IFor best experience Get the App
🚗 Step Up Your Game with Pro Traxx!
The Westin21-24015 Pro Traxx 4 Oval Nerf Step Bars are designed for 2015-2022 Colorado Canyon Crew Cab models, featuring a heavy-duty look, seamless design, and easy no-drill installation. With a wide step area and stylish bends, these step bars enhance both functionality and aesthetics.
D**R
Nice steps, looks great on my GMC Canyon
I replaced these steps with another brand I bought a few yews back when my 2015 GMC Canyon was new. Those steps had rusted completely through from the inside out in less than four years. These steps seem to be made of better quality. They have a painted gloss finish. This design compliments the current Canyon/Colorado very well ands has a great look with this body design. The ends are welded, so hoping that these tubes won't be conducive to rusting from the inside out. Also, my last ones were flat, and these are rounded. Water on the old one tended to puddle on the surface, as this tubular one water will bead off. Again, hoping this helps to stop any paint/coating degradation.
S**N
Fit right, good quality, quick installation, picked the right one!
Was a little hesitant to actually select a step bar. As I kept reading I wasn't sure I could trust the quality or even the reviews (one company was giving a $10 refund for 5 star amazon reviews). I chose the Westin because reviews were good and was a brand name. I absolutely made the right choice! (See the photos of the finished installation.) The second side went on in about 10 minutes once I knew what I was doing. Heeding other reviews I bought some washers (photo). The part that needs them is bolt #4 the M8 Hex cap screw (Yellow) that is used to secure the mount to the truck. In the photo you can see where I added my washer after the yellow lock washer and flat washer (both yellow). You'll need a flat screwdriver to pop off the plastic inserts, a socket wrench with a 13mm socket and extension, 10mm box end wrench and pliers (to secure the plastic bracket, I used only 1 bolt on each because that was the only hole that lined up). Important to tighten the mounting bolts (bracket to truck and bracket to bar see photos) only about 90% (just a little bit loose). This makes it easier to get the bar on the bracket and then level the bar. Finish tightening the mounting bolts to the truck. Then place a level on the bar pad and try to level as best you can before you finish tightening the bar to the bracket. Done!
R**Y
2017 Canyon Crew Cab - Perfect fit!
Arrived fast and in good condition, easy to install on my 2017 GMC Canyon crew cab. The only installation tip I have is to attach the plastic covers before you attach the brackets. The brackets do have either a higher or lower set of holes - I went with the lower holes so there would not be a gap between the covers and the step bar. I really like that the ends of the step bar are closed to prevent moisture from getting inside. Perfect choice for this model.
T**N
Great looking and easy to install!
This item arrived very fast and in good shape - no dings or dents. I was able to install it with no problems. The passenger side step bar is bubble wrapped in red. The driver's side is bubble wrapped in clear. Just pop off the rubber caps covering the 12 holes on my 2016 Chevy Colorado Z71, slip in the 12 screw clips and attach the 6 brackets with the gold colored bolts with the two gold colored washers each, leaving them loose. Then place the step bar on the brackets and screw in the black bolts (with the allen wrench included) along with the two black washers each. I began with the middle two bolts and then did the two end ones. I tightened the 12 gold bolts holding the brackets to the truck bottom ( #13mm socket wrench) and then I tightened the 12 black bolts holding the step bars one the brackets. It is good to have an extension for the socket of 3" or 4" to reach some of the golden bolts. For other golden bolts you will need to take the extension off and have the socket attached right to the wrench. The whole process took me about one and a half hours. I used a throw rug on top with a ribbed rubber mat underneath to lay on as I worked. A flash light or light underneath helps a lot to see things clearly depending on your ambient light.
F**5
So easy to install on my 2020 Colorado
Product arrived with all hardware and parts. Installation was simple and finished in about an hour in my driveway with basic tools. I think it looks great and adds a sleeker look to the truck. I'm happy with the purchase, especially the price I got it for.
J**
They look great on a Colorado
I bought these to help my kids get in and out and they are perfect for that. For me, it’s actually harder to get in, they get in my way. If I try to step on them I end up too high and have to duck to get in. I’ve gotten used to it now and it’s not really a problem. It’s not really the running boards fault, the truck is not that high to begin with. They look great and were not that hard to put on, I’m really happy with them. They are also useful for me when I have to get snow off the roof.
M**6
Solid! Visually Appealing! Great Value!
Now I gotta tell you I'm leasing this vehicle, But for under $200 to put these on, I can take them off again in 3 years. Installation was so easy. It took me a 1/2 an hour each side. Getting in the truck is so much easier. I know it's not that high but without the step rails, getting in and out - I would always get the back of my pants or shorts dirty. Who knows maybe I'll lease another Canyon and put them on my next lease, or ill just turn it in with them still on. Again they weren't that expensive. In all seriousness /they're solid /they look great!! I put a Before & After picture. I can Only comment on my experience but I am very very pleased. Driving a lease i know you don't wanna put any money into it , but visually I couldn't drive this truck for 3 years without these.
B**H
Look great, fairly easy install. Be careful of install tips in reviews
FYI, there is a review that states you should put the plastic covers on before mounting to the truck, don't. Your tools won't fit around the plastic pieces and be able to tighten the the truck. Then you be stuck taking them off. Put them on (without the screws) after attached loosely to truck and before mounting the rail. Then tighten them last.Other than that, fairly easy and look great.
J**M
Façile installation
Moi et mon conjoint avons installer les marcher pieds, j’ai trouver que c’était très façile ça prit environ 1h15 à 1h30 sans stress ça bien été le produit est beau maintenant c’est de savoir si la qualité est là avec le temps nous allons savoir pour le moment très satisfaite et ça fait beau
J**E
Look great on my 2021 Colorado
Amazing product and a great price. So easy to install with very basic tools. No drilling or modifications. Bolt right on. Wife gets easily in the truck now lol
S**T
Nice fit, easy to install
Price is right, really easy to install, fit well.
A**E
Great Step Bars
Great step bars, easy install on my 2017 Colorado Crew Cab. Good value.
Trustpilot
2 weeks ago
4 days ago