WamBam Newport Picket Fence, White Vinyl DIY No Dig Kit

An amazing product for the money super easy to set up i don't get the price of the gate is the downside its less material so idk. But as you can see looks great super durable and its very sturdy and in the texas heat I haven't had any issues. I've bought at least 1000$ of this so far still buying more worth every penny

Great DIY Fence I’m really pleased with this company. The instructions are great and there is additional help online. Just make sure you purchase all the required parts...if you have a gate included you will need to purchase TWO additional finishing posts. I had a pretty simple run of just two panels and a gate. I ended up needing to cut one panel in half to avoid an obstacle and I had to make an angled run as well, so I needed additional finishing posts and some extra brackets and hinges. The angled runs made measurements a little difficult and I had to make some additional cuts. And I was doing this all by myself. So that stretched the install over a few days as I waited for parts. It definitely took me the better part of two days to get it all into the ground and assembled…I don’t think it’s a 60-minute job by any means. Having done it once, I’m sure I’d do it faster next time around. And having a helper would be beneficial as well. Anyway, all that said, the product is highly recommended. It's in the ground and it is SOLID. No concrete needed and no digging required! You WILL need a fence post pounder though. And a bubble level. And a drill…. Attached are some photos of my new little garden area.

Easy installation, very clear instructions , and timely arrival! What else could you want!

The end result is worth it, but you won't have a good time if you're working on a larger area by yourself. Here are the things that I learned: 1) There are no real instructions or guidance for working on ground that isn't level- just a few sentences in the instructions that suggest that it's possible. 2) A standard fence-post-pounder breaks the ground-level marker ring clean off these short posts within a few drops, but luckily it's useless anyway. Get a 10lb sledgehammer instead. Here is the key lesson I learned: 3) Horizontal continuity and the appearance of parallel lines from one panel to the next for the top and bottom rail is the most important thing- far more important than height of the bottom rail above the ground, or the relative height of the pickets in relation to the post caps. From one panel to the next, the brackets and rails should be perfectly horizontally aligned with the previous panel's at the starting point if you're not using a step-like installation method on uneven ground. If you mess this part up, the whole thing will look jagged and terrible. The flow is: Finish one panel, align/level the brackets for the next panel precisely with the previous brackets, and continue to level or angle your rail as needed. Here are some general things: 1) This is too expensive for a single short galvanized fence post, cover, cap, and fence panel. 2) There are no plumbing/leveling donuts like on the Wambam models to justify this being about the same price. You'll have to do the (much) harder work with leveling and plumbing yourself. 3) Seriously, what is the point of that plastic yellow ring? All of that being said- I like how it turned out. It just isn't easy or quick to do by yourself if your yard isn't flat.

My husband and I put this fence together as a team. The instructions are clear. It does take time to put everything together, but besides the time factor, it is easy assembly. The important thing to know is that it's not 100% no dig because to do it correctly, you need to dig out a 4 inch square hole where the post go so that your vinyl posts are 4 inches buried in ground. This is shown in the fence diagram in the product image shown here on amazon as well as the instructions it comes with. So what you do is dig out a small 4 inch square hole, then drive your steel post into the ground (centered), then put the vinyl post overtop and into the 4 inch hole. This creates the right height for the post and picket to be near in height and creates stability for post. Here is what we did to make it run smoother: we made a string outline around the yard where fence would go, using bamboo rods and string. This provided clarity and guide to kept fence straight as we go. My husband dug out the 4 inch holes and did the steel post using a post driver (got for $35). While he was doing his post around the perimeter, I was taking the vinyl post and measuring where the bottom bracket would go. I then used the actual bracket as my guide to mark the 4 holes for the screws. Then I predrilled the screw holes using the drill bit they provided in your kit. The predrilled holes made it much easier to efficiently put brackets on once post in place. We did all the post and brackets, then added the horizontal 6 ft pieces, then last step was to put in the pickets and secure ends with screws. This process created a nice flow. It took us from 9am to 7pm to fully complete ours. We bought 14 boxes, plus a gate and end post. We used them all and had to make 2 special cuts. The fence is 3ft in height so it does look like an attractive small picket fence. We installed for our 3 dogs and 2 of which are big dogs and it truly does the job keeping them inside securely, while looking attractive. Hope this review helps.

Great fence and easy to put up if you have a post pounder! I put it up myself to keep the dogs out of my flower garden 2 years ago and I will be 80 in a few days!! NO HELP Great instructions and easy to follow. Just takes some time. Actually it was a fun project

I bought this fence to create a dog park for our 2 boys. One great aspect is it can be modified to accommodate nearly any configuration you want. I purchased (2) 72" fences, (1) gate and (2) additional posts then used our existing fence as the back side. I was going to use the gate as one end piece, but they don't sell an equivalent piece for the other side. So I cut one of the 72" sides in half to use as the end pieces and used the gate as an extension alongside the other 72" piece. Once installed, the fence is attractive and sturdy. Definitely establishes the "white picket fence" feeling. HOWEVER...Depending on your soil, this is NOT a "no dig" fence. Per the manufacture's instructions, the metal posts are to be placed at least 18" in the ground. The recommend a "post driver" as the best option. I purchased the post driver and it was no easier to get the post in the ground. Moreover, keeping the post level while banging it somewhat erratically is beyond difficult. Ultimately, we purchased and used a sledgehammer to install the posts which was definitely easier than the post driver, but no small feat for a novice installer. I also recommend going onto the Zippity website for clearer installation instructions. Unfortunately I didn't stumble upon this tidbit until I completed the installation. The only downside is the space between the slats is bigger than first thought and our fur babies apparently are all hair and can fit through. I plan to install plexiglass around the fence as it will keep the integrity of the look as opposed to unsightly chicken wire. We removed the grass and added turf and a fire hydrant for the boys to enjoy their new space. I definitely recommend this product. All in all...go for it.

No llego lo que decía la página y no ha llegado todo y estoy en proceso de devolución

Excellent produit, instructions en français, facile à monter.

With a good level and a bit of care, this was easy to install. It never has to be Painted and will last until we’ll after the apocalypse.

We love how cute this white picket fence looks! Definitely takes a while to put this up and do it proper but it was so worth it. We had some pretty large elevation changes so we put this up to make it all level, not to make it even with the ground otherwise it would’ve been all uneven and slanted and would’ve looked horrible. We ordered 20 boxes (120ft) for reference.

Easy to assemble and keep clean. A perfect addition to garden

This fence was exactly what we wanted and extremely sturdy and best of all no maintenance