Reed Leathers Hides - Cow Leather Skin (12 X 24 Inches 2 Square Foot, Whiskey)

The leather piece I needed mine for is for an executive size office chair (12" x 24" cut) as I needed 6" x 12" for each arm rest. I just folded this piece in half and cut evenly in half. The rectangular shape you receive is a bit more than 12" wide, but is 24" in length. No worries that the piece you get is unusual cuts or anything. Just a straight 12" x 24" piece is what you'll get. but I understand the concern, as I thought the same thing.The leather smells and feels like genuine leather. It's not too thick and not too thin. I have a photo of what I was replacing it with. The old is on the left side and the new piece of leather is on the right in one of the later photos. It appears to be almost a millimeter more in thickness. However, due to the age of my old arm rest's leather, wearing down and shrinking from usage, it may have been the same as the new leather's thickness.The leather is not so thick that it isn't pliable enough to wrap-fold the rounded edges of the arm rests, it is firm but bendable to not leave fold marks too much. Being my first time, that was the most difficult part. I also use the scrap piece of trim for the underside of the arm rest from the old arm rests to keep it stable and hopefully durable. It worked, it's really strong and aestethically pleasing having a beaded edge look to it as it was before.Each photo has different lighting, night time when I was done and how it appears in tghe day's blue hue lighting so you could see the leather's color and sheen. The leather's sheen does match the unworn cushioned back side of my desk chair. These photos were taken before I got all the duct tape off and the leftover duct tape's glue residue that I hadn't cleaned off yet when I took these photos.Today is February 10, 2023 and the job has been done and in use for 8 days so far. Since reupholstering and cleaning the rest of the duct tape's glue residue, it's back to almost new looking again. The important part is folding over the rounded edges if redoing the leather covers on the arm rests and making sure you use the right size staples with stapler. I used a Stanley ProSharpShooter stapler and half inch/12mm staples, when I could have used 3/8" even 5/16" to staple the leather onto the arm rest internal boards. I just pounded them down with a hammer and checked to make sure they were stapled in firmly and not loose. My suggestion, just make sure to check for any welt impressions from misaligned padding or in need of a bit of padding, or staples, wood, etc., etc. on the exposed top part you're covering before stapling down your new leather. I do have one spot on my left arm rest with a bump, not sure what it is though, but the padding must have been worn. Hopefully this company will be around if it happens to wear down and come through.This as good as it gets though, for less than $20, and not having to buy some really expensive-not so good of materials type of desk chair they're out there selling now (but I do have an extra new desk chair now that I bought a new one from Amazon as I thought of this restore project AFTERWARDS haha)All in all, I'm glad I found this company on Amazon and was able to get the exact size I needed without wasting a bunch of leather, if it had been too large for my project. It turned out great and will last who know how many more years, maybe 5, 10 years?Thanks, Reed Leathers Hides. Now there's one less thing in the landfill and getting more use out of a completely perfect desk chair. I fully recommend this Amazon seller ✪✰✪✰✪

I bought this to make some polishing pads. I thought it was untanned leather, but natural finish and untanned are different. My bad on that. It still worked for my needs. It is pretty expensive for what you get, but I had a specific size I needed and this provided me enough to cover those needs. should last a lifetime as it is used dry.

First purchased 8"x11" Burgundy on February 22, 2017, then again on March 11, 2020. Both times great quality piece and side by side the color matches! Holds up great thank you! :)

Really nice piece of leather. I got it to cut into stropping lengths for honing, but it is nice enough, I am considering more upscale applications.

I was hoping that the color was like it looked to me in the photo, a burnt orange, but is is not. It is definitely orange, just like it said. Can't fault them for that. It is a nice quality piece, and I will keep it and try to tone it down to the color I need. Just hope my dog doesn't like the taste of it as much as she seems to like my sofa.

Working with leather for soft projects, this is the leather.

The media could not be loaded.  I used it to make part of Astrid's outfit from the movies How to Train Your Dragon for a client. The leather was soft & easy to work with & one of the better prices I found online for the amount you get. I was hoping it would be a little more distressed looking based on the listing photos, but it still worked for my needs.

brighter red than I thought, definitely not a rectangle, order much more than you need.

Good quality and consistent color. Looks to be no blemishes.

as described. no surprises here

A great cost effective option to repair a tear.

I bought this leather to make my brother a nice coin pouch,and so far it is working very well.

Great thanks