EEMB 3.7V 1100mAh 603449 Lipo Battery with JST Plug 2mm, 1PC

Bought to refurbish the original 1X390 battery for a Dell Axim X5. The old Lithium cell was not holding a charge. It is not a straight swap and requires opening up the old battery with tools and removing the charge board/cables from this one to wire directly to the Axims battery circuit. This just fits in the space of the old one - and then glue the battery case halves back together. Works well and holds charge for long time.

The EEMB Lithium Polymer battery works perfectly. It was easy to install and to charge.

I have one of those mp3 players, not used for a while, tried to charge it (old plug) no chance, it was no longer any use. So looked on Amazon for a 2 lead 500ma Lytham batties, and this one looked the same size, had same plug, as soon as it arrived i plugged it into the circuit board, and re assembly was fairly easy, 4 screws and pressed button to switch it on, away it went, playing music i had put on a micro sd card years ago. This battery is safe, unlike some that go bang if you short them out, i think its great. This battery is highly recommended. 5 ⭐⭐⭐⭐⭐

Great replacement of the battery in an old car hands free Bluetooth speaker found in storage after years which was no longer charging or powering up. Had to snip away the wire connector plug to allow for direct soldering to circuit board but this was straight forward using snips. The battery arrived precharged at 70% level confirmed once connected to Bluetooth and offers a higher maH to the OEM battery replaced. Size and fit are great as expected.

Bought this as the specs matched the battery in my Acaia coffee scales and the description said it was suitable for them, but the connector is the wrong size; the Acaia use a smaller connector. I swapped the connector over from the old battery was a bit of a hassle. Otherwise the battery seems good, no issues with it so far. A relatively cheap way to get your scales working again.

A great battery to replace a failed (blown/inflated) battery on a MUX Mighty Plug Pro. Just snip the connector off (without shorting the battery out!) and solder the wires to the contact points after removing the old one! It is slightly smaller than the original in length, however the battery that comes in the NUX from the factory is a custom battery, so an exact replacement is not commercially available. Very happy!

Charges faster the lead weight a fraction of lead holds way more charge than lead. I'm never going back I have 3 bat packs for my wheelchair the other 2 will get changed to lithium so happy for the change. More charging cycles just better in everyway

works great and good value

🔷 Alta capacità: Con una capacità di 1100mAh, questa batteria offre una lunga durata, fornendo energia stabile e affidabile per i dispositivi elettronici che richiedono potenza. 🔷 Ricaricabile e conveniente: Essendo ricaricabile, è una soluzione ecologica ed economica, perfetta per ridurre il consumo di batterie usa e getta e garantire un utilizzo continuo. 🔷 Connettore JST: Il connettore JST assicura una connessione sicura e stabile, rendendo questa batteria compatibile con una varietà di dispositivi elettronici. 🔷 Design compatto: La batteria ha un design compatto (603449), che la rende ideale per dispositivi a spazio limitato, come droni, giocattoli elettronici, o progetti fai-da-te. 🔷 Sicurezza e affidabilità: Con una costruzione robusta e sicura, questa batteria è progettata per offrire prestazioni ottimali senza compromettere la sicurezza del dispositivo. 🔋⚡ Una batteria potente e versatile, perfetta per una varietà di applicazioni elettroniche, con una lunga durata e una connessione sicura!

prima litium batterijen voor goede prijs capaciteit verhouding.

Ersatzakku , funktioniert sehr gut

Uitstekend

Perfecto!