Mini Fridge Stand Mobile Base With 4 Locking Refrigerator Wheels And 8 Strong Feet For Washer Dryer Washing Machine Stand Pedestal, Refrigerator Stand, Adjustable Appliance Dolly Square, Moving Roller

I used this for an upright mini freezer, because it cost only a bit more than lightweight carts. We figure it is a sturdy back-up dolly to take out when needed. The swivel wheels are great! However, we raised ours up a bit for cleaning. Actually the wheel height adjusts too - and we should try this if we ever remove the cart. You will need a Philips screwdriver. All else is provided! Four extra legs were included for heavier appliances. This wonderful cart is a treat to put together because they thought of everything! You’ll see built-in levels, and measurements printed on rulers to guide your sizing of the cart (though I did not figure it out in time to use it; I think similar rulers are on opposite sides.). A tape measure and screwdriver were included too! The screwdriver was not the needed Philips head, though. Rubberized felt is provided, and as it turns out, necessary, for two reasons: (1) our 3.0 cu ft Midea freezer slipped sideways without the felt in place; and (2) the felt raises up the freezer door so it has no problem opening. However, the door swing may have been ok either way, we did not test that. Caution: if you do use this for a side-opening (upright) freezer or a fridge, notice that one of the front legs is actually forward, at the door. This is the one to place inside a corner of the cart. The other leg is farther back. The back legs on my freezer were hidden, but were centered in the long metal piece. One more reason I love this cart: the sellers went to the trouble to match the screws to the blue wheels.

I ordered this product for a non-standard use but couldn't be more pleased. I have a Thrustmaster T300RS GT gaming wheel and pedal set mounted on a Wheelstand Pro stand. The entire assembly weighs about 50 pounds but cannot be stored in the room in which I use it. I had been carrying it from the closet in which I store it through two doorways and into our den, much to the detriment of my back (and doorway trim, but don't tell my wife). I had been looking for a wheeled platform which would allow me to use the device without removing it from the platform, and this seemed perfect. I am not disappointed. The wheels lock, and the height moves the rig only a few inches off the ground. And since the size of the platform is fully independently adjustable in length and width from about 18 to 28 inches, I was able to assemble it to exactly the dimensions I required. I did not install the adjustable support feet, since I roll the rig over carpet and they would get hung up. The item came well packaged, and I was able to assemble it in less than 20 minutes exactly the way I wanted it. The individual pieces are precision manufactured and fit together easily -- unlike other items I've ordered which always seem to have holes that don't line up for fasteners or parts that don't quite fit together. The instructions are brief but clear. Highly recommended!

**This is NOT a review for longevity. Product was JUST been installed**We bought this to put our clothes washer/drier on wheels because our new laundry room is small and shares the space with our upright freezer. Assembly was easy (one screw head was filled in with the weird purple dye, but thee were a few extra). LOTS of screws (just like the item description says). Adjustment is fiddly and where the only problem came in. The product description shows a total of NINE pictures with a clothes washing machine on the platform, but the reality is that the platform BARELY fits a washer. The problem lies in the metal tubes. They only need to be 1-2 inches (3-5cm) longer to be perfect. When I adjusted the platform for our washer, the bars in the widest dimension BARELY (if at all) engage the locking mechanisms.Once on the platform, the washer/dryer are SUPER easy to move. Push it into its spot, lock the wheels, and lower all the legs until they are tight. The washer feels secure and stable. Perhaps I could have made something better or stronger, but given the price, this was just too easy. I will have to build a platform for the freezer though... I wouldn't trust this product with the weight of the freezer even though this claims to be capable of it.

Got this for my washer and dryer. It was super easy to set up. It came with a screw driver and extra screws. Although, I'd recommend a power drill as the screws are tight. I've had two of these for a few months, and I've never been concerned it would break. I've used the dryer on max spin, no problem, and I can barely hear it.It's super easy to adjust, and my floor is really sloped as my washer/dryer spot is by my basement floor drain. There are level bubbles on every corner piece, which are super helpful. There are markings on the bottom to tell you what size you have it adjusted to, and there's spaces to see where the ends of the adjustment pipe are.I would recommend making sure the feet of whatever you set on it are in the very corners of the corner pieces. It's most sturdy that way. I also took off the feet on my dryer to make it more stable.I would definitely buy again! I'm only sad that I didn't know these things existed sooner. Wouldn't have waited to set up my laundry until after water proofing my basement if I had known.