Distributor O-Ring Kit (Premium Viton): fits Geo Tracker, Suzuki Sidekick, Samurai, Jimny, Swift, Vitara

Arrived on time and fit as they are supposed to, stopped the oil leak

Installed distributor case O-ring with no leaks. The distributor shaft O-ring is some what difficult to install but lubed with light silicone grease and very slight wiggle with an intense push it does go in and seal properly. If you need to reposition the distributor gear (which you will) pull just a little and put your left pointing finger down on the shaft just until you barely feel the top of the O-ring and turn the rotor slightly and push back in. If you pull it out to far you will need go through the hard push situation again.

Over priced for what it is, but I needed it and it was correct for my suzuki samurai 1.3

Also fits the G13BB distributorless 16V engines as well. The oring has to be the correct size on the cam sensor cap cover on the distributorless engines or you will crack the cover and it was hard finding a universal one at the store due to it being an odd size. I purchased this one and it worked perfect. It will work on any geo or Suzuki with the 1.3.

I recommend using a bead of RTV to supplement the Distributor Housing O-ring. Whether it's absolutely necessary or not, it's cheap insurance. I think you'll be glad you did...

As described, correct parts, good packaging and shipping

Good fit for 1986 Suzuki Samurai

Worked great