JANCHUN Epoxy Resin Kit 32oz, Bubble Free Crystal Clear Resin

This was a surprisingly good product. I have worked with ALOT of epoxy both expensive and cheap. This stuff is awesome for price. I got it to cast a couple smaller pieces and it out performed some stuff I had on hand that cost double the price. Pros: - No bubbles - Smooth after curing - Easy to use a torch or heat gun to remove any imperfections - Quick curing - Dries very hard (other cheap resins can feel like rubber after curing) Cons: - MUST use a mask becuase of the high VOC - Comes with wood stir sticks that introduce bubbles Overall would recommend this to anyone looking to coat small pieces.

The bottle says the demold time is 4 hours, but when I demolded at four, it was extremely soft, like deforming under its own weight soft. However, demolding at 24 hours gives excellent results! Why not say to wait 24 hours? Despite the high demold time, it does have a really short work time. Be sure you have everything set to race to getting the resin in your molds once you combine the parts. After about 5 minutes, it gets so thick it's difficult to work with. By 10, you can forget it. However, once you ignore the instructions in the poorly translated booklet, this is a truly excellent resin. These dice, pressurized at 40psi, came out completely and totally clear. The short work time might cause problems if you don't have a pressure pot, though. Bubbles will get trapped as you stir like a mad man to beat the timer. If you're curious what mold I used in my example pour, it's from Druid Dice on Etsy. TL;DR, work time of 10 minutes, demold time of 24 hours pressurized, beautiful results.

This resin mixes easily at a 1:1 ratio. It is very forgiving for beginners and has a long working time of around 45 minutes. It's relatively bubble free when mixed but I still recommend using a vacuum chamber if you have one for intricate projects. And it's relatively low odor too which is nice. So far it's held up well in jewelry and cast projects. And you get a decent amount for the low cost. Way cheaper than most local hobby stores have it for.

Possibly it is the humidity now in PA, but this resin hasn't cured for over a week!

First time using resin and success! I think lol .I didn’t get a thick cast I think bc I poured it over foam that you stick the faux plants into and maybe most of the resin seeped down into it but woke up the next day and the rocks were harden, not moving even tipped the plant upside down and none of them fell out the pot so I think it was a success. I just mixed the two bottles equal pours stirred for about 5-7 minutes pour ,it leveled itself out even seen some bubbles popping on their own and let it dry overnight the next day it was solid. Did not have a strong odor either

The seller tried to get ahead of the ball and emailed me even before the product arrived, saying that it might arrive cloudy, which it did. I honestly think the seller should just simply advertise it that it will be cloudy unless the buyer heats it as they described in their email. Being such, I would not have purchased this or only would have if the price were cheaper. I did follow the seller's instructions and put the bottle in hot water, but due to my neglect, some of the epoxy spilled out in the water and so I obviously had to clean the mess in the pan as well. To the seller's credit, the hot water did clear up the epoxy. Although I don't trust just a water and soap cleanup. Even hot water and soap did not remove all the epoxy in the pan, and so I resorted to 91% isopropyl alcohol and some scrubbing, and then after that another soak on heat with soap. It is true that this epoxy does not smell much, so that is nice. -----UPDATE AFTER USING IT------ This resin cures very soft! Just a bit harder than a gummy bear. I cast some items in it to cut it in half for inspection, and the epoxy is easily dented/manipulated with finger tips and finger nails, even after baking in the oven at 170°f for 8 hours. I tested it with a Shore D hardness tester, and it tested to a 4, and the base of the tester was sinking into the hardened resin. Would NOT use this for table-tops or anything that encounters wear.

Similar to Tap Plastic Store items. The world dilutes many good adhesives and I have breathed too many un cured epoxy fumes. If you can't get practical hands on experience, hire a real master of the boat type, air frame type or any thing structualy challenged too pstay together when stressed. This is not the only way e3³

Always a bit of a gamble trying a new resin, but this one delivered. My only real gripe, and it’s a minor one is that I wish you got a little more product for the price. Standard 1:1 mix ratio, about 6 hours to cure, and a 40-minute pot life (though I poured within 10 so I didn’t push that). For a test run I made some dominoes, check the pics, and I wanted to see how it handled degassing on its own without throwing it in the pressure pot. At around 70°F with pretty low humidity, zero bubbles. Came out clean. Solid resin.

السعر مناسب

لأنه حلو

Für das ich absoluter Neuling bin was epoxidharz betrifft, hat alles auf Anhieb geklappt ! Tolles Ergebnis

Amazing resin very happy

Easy to use , excellent results , good quality and price