Cubilux 5-Way 6.35mm Stereo Audio Splitter with Switch, Passive Multi 1/4” AUX Distributor, Quarter Inch TRS Splitter Box/HUB for Instrument Cable, Headphones, Speaker, Guitar, Keyboard, Pedal

Smaller than I expected, but nice quality switches and enclosure; might be weigted but nonetheless it feels heavy and doesn't wiggle around on my desk. No static or scratches when switching an output on/off. Also notable that using multiple outputs works seamlessly, it might be my amplifier that causes amplitude to stay steady across different loads though. Especially useful since TRS jacks are so fragile, this makes switching or using multiple devices ez and consistent - switching from headphones to IEMs with monitors or other amplifiers for zones around my room is now just a couple buttons

I've used this splitter daily for 1 year and 2 months now, and it is definitely worth the purchase price of around $20. I did run into an issue around 11 months in where I would get channel imbalance through my headphones due to the switch contacts internally sticking or forming a micron thick oxide insulating layer from just everyday use. This is normal for any kind of electrical switch and the fix is to just repeatedly press/toggle the switch over and over for about 200 times. This cleared up the issues of channel imbalance that I had, you can check by comparing the audio with the switch pressed down all the way and when it comes back up into the held toggle position.

I used Coleman Audio LS3, but it's big/chunky and some what ugly. It's also difficult to fit multiple LS3 on my desk. I looked into alternatives and this one fits the bill great as 1 in 5 out for my home studio. It will kinda work as 5 in 1 out (if you're super careful, so it won't work for me), but after some research, the lack of resistor means you can potentially damage your equipment, so I'd recommend against trying. I really really wish they made dual-TS versions, since this means I had to buy a bunch of TRS to TS Y splitters, but no luck finding one like that. If any of you manage to find one, please let me know! As long as it's cheaper than LS3, I am pretty sure I'll pay (begrudgingly).

These are very nice, 1 input and 5 outputs. You can select which of the 5 to activate. No problem at all until channel 1 on both units blew out. all the other outputs still work as expected.

I bought this for multiple keyboards and it works great. You can play multiple keyboards through one amp with this device.

Pros. Small footprint, seems sturdy. Con: one Chan switch was jammed On. But it will not affect my use. I'm not returning it, not worth the hassle, so no negative reflection on the seller as they did their part and I satisfied they would replace it if I asked. But I have a project underway and need to get after it.

I cannot be happier about this device. Before, I was using s preamp distributor which was inducing hum into my subwoofer, due to the inevitable ground loop. This passive device solved the problem - is quiet as a mouse! And is built high quality. Thumbs very up! Thank you, whoever built it!

This device works as advertised. It's sturdy and easy to use. No problems with solid connections. My only complaint is that it is difficult to tell if the buttons are up or down ("off" or "on") by looking at them, especially in marginal light. It would be nice if they had a white line around them or had a greater distance to travel between "on" and "off".

Keine störungen. Macht was es soll

I use two of these switch boxes in my studio, one to switch among 4 audio control systems, another to switch among 3 sets of headphones. In both cases boxes worked perfectly for almost a year, but.. REVIEV after 16 months of use. In both boxes switches began loosing contact in almost all inputs. Some lost one channel, some were crackling when switched. They definitely cost too much for this kind of trivial problem. To save them I had to buy an electric contact cleaner spray, open both boxes and spray cleaner into every individual switch. A bit of work, they seem to function correctly at the moment, but for how long, I do not know. I will return with another review after a few months September 2025 Despite my effort to revive the connectors they quickly returned to previous crackling state. Now I have had to replace them both by versions with rotating switches. This kind of switches seems to work better and longer, but caveat is that you cannot connect the signal to more than one input/output at the time. As I do not need such option having two distributors with rotating switches gives me what I want. What is not pleasant is putting CAN$60 to garbage, so if you do not have to buy these overpriced and fast degrading boxes, search somewhere else. These boxes are not worth the money manufacturer asks for and definitely not worth your nerves.

Fonctionnel et bonne finition

Works a treat

Works a treat. Great quality