Mini Crossbow Bolts, 6.3" Crossbow Arrows, Aluminium Cross Bow Bolts Arrows for 50-80lbs Pistol Crossbow Precision Target, Great for Practicing Shooting Target, Small Hunting Archery (36 Pack)

Good cheap replacement bolts, the tips do not come off but that's fine I just wanted some to shoot around the yard. The tips are more pointy than those that came with my pistol crossbow, and the fins seem to have a thicker plastic too.

I have a 80 lb draw-weight pistol-size crossbow that uses 6+" bolts. OEM bolts run around two bucks each, and are easy to lose in the field, and also bury themselves completely in a normal styrofoam archery target, making them difficult to find, and even more difficult to extract from the target if you do locate them. Of course, these Kavard bolts also have the same propensity to get lost. So I was looking for something a lot lower in cost to me when bolts go wayward. These Kavard bolts looked promising at around a half-buck per bolt. The only negative appearing in a few of the reviews indicated the bolts may come apart. So on receiving these bolts, I tested each one trying to pull them apart -- and they all passed --none pulled apart. However, they will pull apart if you try to pull them out of a stiff target material, such as the gym floor mats I use in my homemade targets. Then you can either take the target apart layer by layer (which I do), or glue the bolts back together with a strong glue - or do both. I also weighed the bolts and compared the weight against the higher priced OEM bolts -- they weighed the same. And the visual inspection also showed the bolts to be identical in dimensions and materials. So being an engineer, I satisfied myself that these results justify buying the lower cost Kavard bolts. One additional thing I do to all my bolts is paint the aft end of the bolt a bright color to help me locate them (assuming they're not completely buried inside a target or dense undergrowth.) EDIT: The fletching on these Kavard bolts tends to break off the shaft on target impact ever since I greased up the crossbow slide, and can't be repaired by just sticking the shaft insert part of the fletching into metal shaft, as that insert is broken off the fletching.

Exactly what it says is exactly what you get

I had no Illusions about their quality (based on the price). But these little suckers are pointy and sharp. I buried two in my target because unfortunately, the Fletching and knock will come apart from the shaft when it's buried into a target. No problem however, since all it took to fix that issue was a tiny dab of adhesive. They are made for target shooting, not hunting. And even though I would consider this quantity over quality, there are lots of fun.

'Work well and hold up nice so you can re use

Straight, tough,

Awesome thanks

Fast very fast the wife : Grandson & I Love them there Strong 1 thing Crazy Glue The fins