Tenergy NiMH Receiver RX Battery with Hitec Connectors 6V 2000mAh High Capacity Rechargeable Battery Pack for RC Airplanes/RC Aircrafts and More

Appears to be a good quality battery pack. I cycled both after they arrived and they both took a full charge at 200 mah in about 11 +/- hrs., overnight on the chargers. Would purchase again. Fast shipping and a fair price.

For the price and the weight and mAH rating these appear to be the best on the market. I have not reviewed these yet. I have a large RC plane that weighs around 25 lbs and not sure if these batteries will have enough mAh. My old battery pack was a HdiMax 3600 mAh that powered the larger servos and old futaba reciever 72 mHz. These are supposely 2000 mAh and these have the most mAh i could find. I update this review as I test these.

I ended up using this all season and then let a fellow flyer borrow it for a few seasons, and then he returned it. Now, several seasons later, it still works great!

I'd buy these again. I tracked down what I thougth were battery problems to other issues. I'm giving them four stars because they have quite a high internal resistance. To be fair to them I tested them both with a (Hitec) battery charger and using a resistive load. The packs come in at about 450mOhms, which is quite high. For comparison, a Panasonic Eneloop cell has a spec of 25mOhms, or 125mOhms for a 5-cell pack like this one. With a 0.2C discharge (400mA), you get 2000mAh out of them. The high impedance means that this diminishedssubstitutionally at higher discharge rates.

GOOD PRODUCT

Works great.

Great pack (nicad) for testing servos

These are great battery's.

El producto es asequible y representa una buena solución para el Radio Control, especialmente en Radio Control para superficie, el producto luce bien y esta bien terminado, como toda batería necesita su cuidado y un trato apropiado, se carga muy bien y se comporta bien, es claro que cada persona debe crear su opnión al respecto del producto. Considero que por el precio es una buena alternativa para seguir impulsando el hobby del Radio Control a un precio razonable. La batería la instalé para un sistema Futaba de 3 canales que alimenta a un receptor y dos servos para un Carro Carson de Nitro escala 1:10 Alemán, sin problema operó dos corridas de 15 minutos y todavía mantuvo un buen nivel de carga. Recomiento esta solución para reducir el uso de baterías alcalinas. En el largo plazo es una solución más económica, usen un sistema de carga de buena calidad, de esos que se anuncián como cargadores multi-chem, es decir para diferentes tipos de baterías NiMh, LiPo, Ni-Cd, Pb, etc. Suerte y a divertirse, solo se vive una vez...

Se ve bien el producto cargo Vien falta trabarlo en el capo aber como se comporta

La baterias se ven bien y mantienen buena carga hasta ahora

Que es ligera y de buena calidad para el rc

Excelente calidad 👌