Corsair 4000D AIRFLOW Tempered Glass Mid-Tower ATX Case - High-Airflow - Cable Management System - Spacious Interior - Two Included 120 mm Fans - Black

The Corsair 400d is a fantastic mid-tower case that excels in one crucial area: cooling. Its thoughtfully designed airflow channels and generous ventilation ensure that your components stay cool under even the heaviest workloads. Here's why I'm impressed: Excellent Airflow: The 400d features ample front, top, and rear intake vents, allowing for optimal airflow throughout the case. Smart Cable Management: The case includes dedicated cable routing channels and tie-downs, making it easy to keep your build clean and tidy, further improving airflow. Supports High-End Components: You can easily fit high-end graphics cards, CPU coolers, and multiple drives within this case. For those bigger GPU’s simply remove the fairing from inside the case. Easy to Build In: The 400d has a spacious interior and tool-less drive bays, making the building process a breeze. Stylish Design: The case has a sleek, modern aesthetic that will look great in any setup. Overall: The Corsair 400d is a strong contender in the mid-tower market. If you prioritize excellent cooling performance and a user-friendly build experience, this case is an excellent choice. I hope this review is helpful!

Bought this for a recent build project - it's fantastic. The top panel has lots of ventilation and room for multiple fans, as does the back. You could even put one over the PSU. And three on the front. Or mount an AIO or radiator on the side. There's PLENTY of room to do decent cable management and fit all those fan RGB cables, and an RGB controller. And multple SSDs and HDDs in the dedicated bays, which come with easy-screws. Every aspect of this case is finished to a high standard, from the machining, to the blasting and painting. Every hole is pristine, every surface is smooth. And, because you'll want to see inside, the tempered glass is very solid. Both panels pop off easily, so you don't need screwdrivers if you need to hot-swap or have a look inside, or do whatever you're doing. I may be biased, but it's also GREAT as a single-chamber. Nothing to worry about, but PLENTY of room with the access slot for PCIe/Mobo/SATA cables. It'll fit a full ATX with a chunky 7900XTX and still have room for a little bobble-head. Minor criticisms: Plastic feet and front panel trim could be a slightly higher quality or better finish, and they don't seem to match the case 100%. Might be worth removing and painting, if you're that bothered. The rear slot covers slide into a groove and are secured on one side with a screw. This can cause resonant vibration at certain frequencies. For someone like me with hyperacusis, it is HORRENDOUS. Easily solved with a tiny bit of adhesive putty. Overall: Excellent value for money, great build quality, and even looks like it might withstand some customising and machining.

Bought this case to build a budget PC out of older spare parts (GTX980ti, i7 7700k) and wanted a solid case with space to upgrade. Assembly: I'm no PC building pro, last time I built one was 12 years ago. The build process following a guide from Linus Tech Tips was working without a hitch regarding the case (had a problem with the Motherboard which had nothing to do with the case). It's got plenty of space for most Motherboards, my PSU installed easy and i like that i can tuck cables neatly behind the panel. Filters and Fans: Case comes with two fans; one in on the front and one out on the back. Those are preinstalled, sound quiet and work well. They do not have RGB if you care about that. For my build that is enough but there is space for two more on the front, which are shown in the marketing material but not included. I know I could have read it more closely but I just assumed I get what's in the picture. I think the filters are easy to remove and clean and i like the asthetic of the top filter a lot. Quality: I think the quality of the metal, glass and other things like the power button is all good. Nothing to complain about.

I upgraded the processor in my PC and the new device was running hotter than I liked on the stock cooler. The old case was quite old and too small to take a modern cooling solution, so I decided to do a complete rebuild. I didn't want some silly looking gaming case that lights up like a Christmas tree - this is a serious work PC. The Corsair 4000D Airflow seemed to fit the bill and at less than £90. I was pleasantly surprised - it is easy to work on, has plenty of space for a reasonably high performance cooler, and it looks quite tasteful. I would not have chosen a glass side panel, but it is smoked glass and provided the fans are not all illuminated, you are not really aware of it. Cable routing is quite easy. My only criticism is that the positioning of the power supply can make cables a bit of a tight fit. I've installed a Corsair PSU which should have been a good match, but I've still had to install extensions on the SATA power cables in order to route to the recommended SSD bay locations. I've seen it criticised as being a bit boring. I guess that it is for a hard-core teenage games PC builder, but for an old fogey like me building a serious work or hobby PC, it is pretty close to perfect.

lch habe das Corsair 4000D Airflow Gehäuse vor kurzem gekauft und bin absolut begeistert! 🖤 Die Verarbeitung ist erstklassig – alles fühlt sich hochwertig und stabil an. Das Design ist schlicht, modern und sieht auf dem Schreibtisch richtig edel aus. Besonders gut gefällt mir das Airflow-Design: Meine Komponenten bleiben auch unter Last schön kühl. Der Innenraum ist sehr gut durchdacht – Kabelmanagement war super einfach, dank der vielen Möglichkeiten zur Kabelführung auf der Rückseite. Auch größere GPUs und AIO-Wasserkühlungen passen problemlos rein. Der Einbau ging schnell und unkompliziert. Es ist genug Platz für zukünftige Upgrades, und die Staubfilter lassen sich leicht reinigen. Für den Preis ein absoluter Top-Deal. Ich kann das Corsair 4000D Airflow (oder auch 4000X) jedem empfehlen, der ein stylisches, funktionales und gut belüftetes Gehäuse sucht!

Pretty

Bir egzoz, bir ön fan ile geliyor, itx, mATX, ATX ve hatta E-ATX anakartlarla uyumlu, içine devler devi RTX3090 bile sığıyor, yanında da kablolama için cırtcırtlar ve kelepçeler verilmesi, aynı zamanda kasa parçalarının tüm vidalarının tornavida gerektirmemesi gibi hoş detaylar pastaya harika süs oluyor. "Airflow" performansı kıyaslamalarında zirvelerde olmasa da stok halde bile tatmin edici bir soğutması var. Ön panele, ek olarak yüksek performanslı fanlar alırsanız sistemin sıcaklığını dert edeceğinizi zannetmiyorum. Bu kadar övdük hiç eksisi yok mu bu kasanın? Elbette ki var: Örneğin tanıtım resimlerinde gösterilmesine rağmen (yine Corsair'in) RM850 güç kaynağı, HDD yuvası takılıyken yerine sığmıyor. Bunun sebebi kabloların hesaba katılmaması. (Resimlerde de kablo gözükmüyor :D ) Yani 850w ve üzeri bir güç kaynağınız varsa ve HDD yuvasını kullanmayı düşünüyorsanız, iki defa düşünün. Bazıları ön paneldeki toz filtresinin fana çarpması problemine sahipmiş ancak ben böyle bir sorun yaşamadım. E-ATX bir anakartı takmak için kablolama yolunu sökmeniz gerekmesi de bir eksi olarak sayılabilir. İndirimli fiyatına ve hatta daha ucuza güç kaynaklı kasalar alınabilir, bu tabi ki alıcının ne tarz bir ürüne baktığıyla ilgili. Fakat hem airflow olup hem de bu kadar şık ve sade duran kasalar piyasada oldukça az. Corsair oldukça sağlam bir marka, üzmez. Ancak burada ne çeşit bir kasa aradığınız kritik öneme sahip. Hem sistemimle uyumlu olsun, hem kurarken beni yormasın, hem sade olsun hem de içi efil efil essin diyorsanız bu kasayı "indirimdeyken" almanızı tavsiye ederim. Keza normal fiyatı olan 1K küsurlara deyeceğini zannetmiyorum.

This case is good; it's easy to care for and clean, and it provides plenty of space to add components. I'll also call this the Dust Dome 4000 because the front panel protects against a lot of dust entering. It's actually very effective. I would recommend this for a starter build or even a general build. It feels premium, and for what it is, it's really good!

Great case. Compared two my previous one, great design, easy of use for cleaning, great airflow. No screw is required for this case