KUAFU 2Pcs Windshield Wiper Cowl Vent Grille Panel Hood Compatible with 1999-2004 Ford Mustang Replacement for 3R3Z 6302228 AAA & 3R3Z6302228AAA & FO1270102 Black

Worked good

Do not expect an exact fit. It seems to be of good quality in general, the plastic is thick and the fact that it comes in two pieces makes it easier to install. Fitment issues I faced: Firstly, the clip fasteners will not make the piece stay put, so I took off the one from my broken piece and transferred them over. Took some grease and a bit of work, but it worked out. Secondly, the two separate rubber flaps that come in the kit do not have any adhesive and the have to be adhered to the ends of both pieces, towards the fenders. I had to use some 3M double-sided tape I had laying around, worked good. Thirdly, the seal facing the windshield is not firmly adhered to both pieces, but that was not much of an issue because it sits flush to the windshield with the original clip fasteners. I, however, had to remove one and shifted a bit to the right because at the junction it left a gap. It worked good. Moreover, the plastic fasteners that came with the kit did not fit the orifices they were supposed to go in so I reused the original ones and added some grease to it so that they do not stick to the cowl should I need to remove the piece in the future. At the end, it looks very good and I hope it will last. I must say I am happy having saved about $100 compared to OEM options but came at the cost of some labor. Who knows if the OEM would still be a good fit, but I did not want to find out. Overall, good value for the money but not for the faint of heart to install and make it fit. Take the opportunity to power wash or pressure blow the cowl guts before installing it. I found some sort of a nest in there! I have left quite a few pictures.

It was a birthday gift for a friend of mine and it fits perfect and very easy to install. Very good product.

I bought this product thinking I’ll save a few dollars vs the more expensive ones, and that was a huge mistake. Half the tabs were broken when I received it, and the ones that weren’t were so small they wouldn’t even clip into the factory spots under the windshield. Not only that but the rubber strip was coming off as soon as I opened the box it’s held on with tiny strips of 3m tape. It never did fit right, I was only able to get the driver side on, I ended up throwing both pierces in the trash and I will be buying a heavier duty one. Do not buy this product unless you like blowing money!

This is not the greatest quality. If I were to do it again, I would buy a higher quality piece. The metal clips that hold the windshield side of it in the slots of the cowl metal piece will need to be widened to hold it in place. The way they come; they are too narrow to actually clip into the slots. I took mine off the tabs and worked on them with two needle nose pliers, then checked the fit in the slot. Also, may need to tighten the outer tangs to hold onto the tabs tightly. Be careful with the tabs that the clips go onto, one of mine was already cracked and loose, about to break off, so I put a little super glue on it to strengthen it. Also, start with the driver's side because it goes under the passenger side piece at the middle where they join together. Bottom line is that it's not the best quality, but it is workable if you are good at modifying things to work.

it is a good quality, but the fit was very poor. the weatherstripping would not hold with the 2-sided tape that was on part, peeling off very easy, and retaining clips would not hold into place. Where the 2 pieces come together in the middle, the passenger side would not clip into the cowl retainer properly allowing the piece to stay up and not be flush. no matter what i tried, clip would not stay in place. .

This is a really great product! I was super leery about purchasing this from Amazon, but I was highly impressed! Very good quality and easy to put on! The only complaint I have is that I wish the adhesive wasn’t yellow, but you can easily go and get some black adhesive. The yellow just really clashes with the black and my car is orange.

The part fix perfec