2000 mah Fast QI Wireless Charging Adapter for Xiaomi Poco M3 F3 X3 Mi 10 11 for Huawei P30 P20 - Type C Wireless Charging Adapter - Fast Qi Receiver for Wireless Charging

You do have to be careful when ordering one of these, while most any Qi charger works with this, the problem is the connection. The two main outlets on your phone are USB C, and USB micro. This is a type A USB micro. USB C is perfectly oval and can be used either way, but micro is a triangular trapezoid shape, and the narrow side can be up or down. Since the flat ribbon cable is coming from the back of the phone it must be able to be plugged into the port with the proper orientation as you cannot twist the ribbon cable. Look at your phone, two things are important, one is that orientation, and two the port must be in the center of the end, not off to the side. They may make cards that work on the side, but you'd have to find one. It won't likely work with a very thick case or some strap on lanyard that covers the back of the phone you need to be close to the Qi charger, and laid relatively flat.I just got a speaker phone with charger and after installing about 60 seconds to do, I put it on the charger and it immediately read phone was charging. Works well, as fast as the plug-in micro cable. In the past I'd used a flip phone for years and charge the battery outside. My current phone was used for testing mostly due to using WIFI apps. Ports to connectors are only designed for so many insertions. With phones I'd guess a couple hundred at best, but not certain. A lot of my friends had their port wear out, some cheap ones damage easier. This method allows you not to put any wear and tear on the port so you can save it for backup power when on camping or other remote locations. At home just put it on the charger platform at night and you're good to go all day (at least for more efficient phones). Recommended.

I bought this particular adapter because it is touted as fast charge where most aren't. I've used these (different brand) a number of times with zero issues.However, this arrived today and I plopped it right into the case. First thing I noticed is how thick it is. You can see the bulge in the photos I took. This means the phone no longer sits flat, and rocks when I pit it on the charger.Worse tho, is I stuck it on the charger when it was at 89% battery. The phone gave the right feedback and the charging indicator came on. So I left it for a bit. When I got back, the charging indicator was still on, but now my phone was at 86%!! Dropped 3% while charging? So I took it off the charger and left it lying on my desk for the same amount of time that it was on the charger (about 25 mins). When I picked it up after the time was up, it was at 85% battery.Just to be sure, I tried it again. I stuck it back on the qi charger for another 25 ?mins, while it still read 85%. 25 mins later? 81%. Yup, it goes discharges FASTER while charging using thus device.And this is being used on a moto g stylus, a model that is explicitly mentioned as compatible.So, I would probably get a new one bases solely on the thickness. But since it discharges the battery while it should be charging, there's nothing keeping me using this thing.

I wanted to write this review because I was looking for this information myself before purchasing and because there are several mixed reviews when it comes to using this adapter with an iPad. I have been using this charging adapter with my 9th gen iPad for a few days now and it has consistently worked for me. However, it’s possible your results may vary based on a couple of factors.First of all I have a transparent plastic case backing. No idea if that actually makes a difference or not but that’s my setup. In addition, I am charging using a flat wireless charger (TOZO W3 mini wireless charger) that lies flat on a table rather than the more common stand-type chargers more suited for phone sizes. This gets rid of the need to balance a larger iPad device just right on a standing charger. However, you still have to get the placement just right for the iPad to start charging and it does take several tries. To get around this, I realized I could place the iPad face down on a table first and then place the flat wireless charger on top of the iPad. This takes the guesswork out as I can place the wireless charger exactly on top of the adapter. See the pictures I’ve added.I can’t comment on charging speed as I use it to charge while I sleep and have a full charge by morning. In conclusion, I’m quite happy with this little adapter and appreciate not having to use a cable anymore.

Product claims to be "Fast Wireless". However, that is not the "Fast Wireless" mode used by Samsung. I bought this as my previous Samsung S7 had "Fast Wireless" charging and that is what I got when using my Samsung wireless charger. I added this to my Samsung A54 in the hopes that this Qi enabled, Fast Wireless receiver would work. It does not. It only produces a slow charge, not one supported by the "Qi Fast Wireless standard." While it does not work out at the technical level, it was easy to add to the phone and fit within my case. Oh before you say the case was to thin, I pressed the receiver itself next on the Samsung Wireless charger. I hope the company fixes this as I would like to use it.