15 Amp 10-Inch Jobsite Table Saw with Folding Stand-TS6307-00

I was shopping around for the best table saw with the budget I had at the end of last year. This particular table saw had a good rating for a budget table. It is worth mentioning that this is the first table saw that I have purchased and used. This was priced at $279 at the time of order. Even at the current price of $329 this is still a good buy. Initially I was not expecting too much out of this table but I have been very impressed with it. The legs are very sturdy and there is a way to get the table level on the ground with the feature of the foot clamp at the bottom of one of the legs as shown in my picture. This table comes with a 10" 24T blade so this can be used right out of the box. Setting this table up was okay except as I mentioned earlier I have no experience so I did have a little trouble with regards to fitting the blade and guard. The instructions are comprehensive but I would say the diagrams are not really as clear as they should be and there was missing information (for example) as to where to locate the blade wrenches, I couldn't find any mention of the location anywhere in the instructions. It took me a while to locate the blade wrenches, I eventually found them underneath the table, I have included a picture of this for reference. Also included in my pictures are photos of the accessories which all have a storage space which makes this table neat and compact. I found that this table saw cuts well and the rip fence was easy to position and use. As with all tools I do believe with some care this table will last a while. This is a great table saw for beginners or to use on home projects. In my opinion this is worth the investment and overall I believe this deserves a full 5 star rating. **NOTE: The blade wrenches are already attached to the table underneath as shown in my picture.**

After a lot of research, I found that this was the best saw for me in my price range that would allow growth with additional capability. I had been warned in some of that research that the miter gauge is a weak point. That turned out to be true. It is only 12" long and has a very small surface. Cross cutting a 3/4" 30"x12" board turned out to be more than I was comfortable with the included miter gauge as it was hard to handle. So I am replacing that with a better one before completing that project. (currently waiting for it). When cross cutting small trim pieces, that was far more tolerable. The fence, adjust ability, ... all worked extremely well. I went through the setup and checked all alignments. It came from the factory perfectly aligned everywhere. Rip cuts that fit on this are a joy compared to my having tried to use a circular saw and straight edge before getting this. From the photos, you might think stability would be an issue. Stability isn't an issue at all. That was proven out when I found I was comfortable ripping 23/32" 4x8 sheets of plywood on this by myself. It is a massive step up from the circular saw I had been trying to use. Saved me from having to buy a track saw. A track saw would still be required if your rip is over the approximately 25" max rip capacity. With a vacuum attached, sawdust is not an issue at all with only a tiny amount of saw dust left on the surface after a day of cutting. Instructions are great. I needed an education since it has been 45 years since my wood shop classes and working with my Dad on his table saw. One concern is if you read the instructions, they state that the kerf of the blade that you use must be .1" or greater to be compatible with the riving knife and prevent kickback. However, most of the blades I found were under that. I ended up going with one that was .098" and that has been cutting like a dream without issue. If you order this saw, I would recommend you order a better miter gauge if you don't have one. Otherwise you will have downtime while you wait for the better miter gauge. At the time of writing this, I have not used the advanced features like bevels, miters, dado, or rabbits. In short, I would buy this again. Just know you will need to additionally have: - better saw blades - dust collection - better miter gauge

I’m not a cabinet builder, but I do need a table saw from time to time for projects around the house, and I’ve been very impressed with this SKIL 10-inch jobsite saw. It’s affordable, portable, and the folding stand makes it easy to move around and store when I’m finished. Mine has made good, reliable cuts every time I’ve used it and has been more than enough for the type of woodworking I do. If you’re building fine furniture every day, I’d probably step up to a professional-grade table saw, but for the average homeowner who wants a dependable portable saw without spending a fortune, I think this is a great option and would recommend it.

A handy and functional table saw that stows easily in your garage and is nicely priced. Ripping 1x or 2x boards with a circular saw is a huge pain. A bench saw requires a sturdy table you can screw or clamp to. Not to mention panel stock is too big for the fence. I upgraded to this saw and it fits the home DIY bill perfectly! Reasonable price, compact storage, and adequate functionality for most tasks. This and my 12 inch miter will probably more than serve my DIY lumber needs for the rest of my days! On the other hand, there are a lot of plastic parts. I would consider it a light to moderate duty tool, not heavy duty, and I would not use it for major construction projects unless I expected it to be short lived. It will probably not hold up to the stress for a long time and fail under an extended heavy load.

I currently own a contractor table saw that I have setup in my garage/workshop. I needed a small table saw that I could carry around to where it is needed for smaller jobs. After good internet reviews I decided to purchase the SKIL 10" folding table saw. It arrived in perfect condition, it was pretty light (it could be carried by one person), and had all the features you would expect. The table was made out of aluminum and was very flat. It had a nice adjustable fence, came with all the safety items (Riving knife, anti-kickback and blade guard). included blade change wrenches, miter gauge, etc. You can get a more detail review of the features on YouTube, so will touch on the actual usage I got out of it. It cut straight, clean cuts. The fence is easy to adjust and lock in place. The blade it comes with is ok for basic rip cuts but I changed it out to a 60 tooth for smoother cuts (less tear out). It had plenty of power to cut 2x4 pine easily. With a shop vac attached dust collection was pretty good. The miter gauge is junk, I would not use it for safety concerns and I have an aftermarket sled I use for cross cuts. For the price it is definitely worth it to me, for what you get, a good quality saw that has nice features and does a good job of cutting wood. I would recommend this saw.

First time I've owned a table saw and so far so good. Fairly easy to assembly and I used it to make a work bench. Cutting and ripping through 4X4, 1X3 and plywood went well. For beginners or even those that are experienced, not bad. Like the fact you can fold the legs inward and it's portable.

I did JUST get this saw today but already put it through a few cuts. (This review is not for longevity but initial build quality). As of right now, I love this saw! The stand is far more stable than I was expecting. When folded up, the saw isn't too heavy and very easy to move around It cuts like butter; it has plenty of power (I haven't cut anything larger than 2") It was very easy to set up And finally, it packs away very nicely. It's like there's a place for everything. I can't wait to use it more.

Everything stores in the saw for transport. The saw set up quicky out of the box and all settings were dead on accurate. The dust ejection is excellent, and it seems as though it has a powerful fan moving the dust. I recommend an inexpensive dust separator and vacuum, as just letting the dust eject to open air creates a mess everywhere. One con. It is LOUD. Hearing protection is absolutely required. I recommend this saw.

天板がだれてハジの方で真っ直ぐじゃなかった。 ちょっと残念。 でも他は扱いやすくて良いとおもいます。 高い金払ったんで、楽しみながらやっていきます。

I just returned a new Ridgid 4518 because it was impossible to square and set up. It was very cheap material wise which really surprised me because I am a fan of Ridgid. Don't buy it. Save up until you can spare $200 more and buy this Skil. It is really amazing. Accurate and square right out of the box. The rack and pinion fence adjustment is so good. Truly a well engineered tool. Lots of power and finally a saw that controls the dust fairly well. I have a lot of confidence in the saw which is important when working with a tool of this nature. Highly recommend you get this tool in your shop.

Una excelente maquina, su guia es precisa al milímetro, su construcción es muy sólida y su potencia es excelente para su tamaño, el contar con patas abatibles la vuelve muy práctica, tal y como afirman en youtube... la mejor de su categoria. En dos años y medio no conozco a nadie que no este encantado con ella.

No podría haber otra mejor opcion. La compre debido a las excelentes reseñas que encontré en vídeos (de americanos) y concuerdo completamente. Es muy practica para transportar, muy precisa con el mecanismo de gusano para la guía, fácil de calibrar, potente —incluso más potente que la DeWalt, porque tambien la probé— y duradera. La he trabajado por dos años casi a diario y sigue dándole. El único pero que le pongo es que es muy ruidosa en comparación con la DeWalt y la Bosch de esta gama.

Perfect size for hobbyists. Didn't want to lug around a frame and wheels. And the saw came zeroed on all adjustments. Great saw for the price. And customer service was fantastic at getting it to me when I needed it.