Snapmaker PLA 3D Printer Filament 1.75mm 1KG Black for Most FDM 3D Printers

Wireframe Art'sy stuff is amazingly repeatable once you dial in your settings.. I printed the enclosed Thermal tower to find the best print temp, For my ender3 pro with a BTT SKR E3-V2.0 board upgrade. Turns out 190-195 degree produced the highest quality with NO blobbing or oozing, the finish was Awesome. I printed a retraction test also and ended up dialing back to 3mm with no Stringing. I have tried several filament's as you should too to find the one that delivers results. For Now I'm using this. Snapmaker Black PLA, The spools have a gauges on the side I find helpful also. The price when on Sale is OUTSTANDING for what a High quality level you get. $16 a 1000gm Spool pretty Cool.

1. The pla get stuck pulling off the spool most of the time i have to pull it apart and unwind the spool manually so the extruder can pull it in ... So with that said i gave it a 3 star for print quality because if its stuck on the spool it does not print some layers ....

Snapmakee and snapmaker filament work excellent together! This print would have taken 30+ hours on the Bambu but only took 12 hours with the Snapmaker using the dual extruder module.

Works well

This filament printed great! I found that my printer can easily print this at 205°C. The filament also adhered very well to the build plate at 60°C with a little glue stick.

i am having so much fun printing 3d models with this filament. I bought two spools, one black and one white, The black is halfway gone as I am finding things to print. I intend to buy more black and a few more colors as I am having a blast printing whatever I can.

Im really really dissatisfied and disappointed with this filament. Without a DOUBT it's THE WORSE black PLA I have ever purchased and used. I'm so close to saying it's the worse filament I've ever purchased, and please note that at times I have bought filament off the WISH app! This filament is not consistent whatsoever. Bed adhesion is terrible, I have to sacrifice a small goat and dance the macarons in a Barney suit just so the first layer sticks correctly. (sarcasm obviously, but I hope the point is made). The extrusion temperature IS ALL OVER THE PLACE. No real sweet spot, anywhere from 200 to 250c! It's insane. Also, if it decided it wants to be hotter, it clogs up my nozzle and ruins the print! I only use this when Im having such a good day they I just want my weekend ruined. It is a horrible product. I am sad that I missed the return window on this, but hey, live and learn. Any print longer than 2 hours, have fun with stringing, clogging, and all sorts of mess-ups. Look elsewhere.

I had no issues my very first time ever printing. Works well.

I bought this as I ran out of my printer's starter filament. I am not sure if this PLA is same formula or if the printer bed just needed a relevel. My 1st two prints lifted part way. After I releveled then print#3 came out properly. I suspect that now that I have it reset things should work from now on. It came in a box with vacuum sealed bag and desiccant inside the bag to absorb moisture so it was well packaged for delivery.

Maybe I got a bad roll and the rest isn't as bad as this roll, Ill never know because I will never be buying this product again. After 3 years of printing, I have never had as many issues as I have with this roll. Its brittle, while also being soft, meaning it snaps in your hand while trying to load it into the printer, and the gears shred it instead of pushing it. After fighting and fighting with it, I finally got a "successful" print, but when I pulled it off the bed the layers separated in the print, leaving the first 4 layers attached to the bed and rest of the garbage in my hand. The half a roll that is left is now in the garbage. I highly recommend not wasting your money, pay an extra 3 bucks for a good roll. Happy printing.

Twice this spool has locked up so badly it stopped extrusion. I am assuming it is due to bad winding in the factory.

Great material. Not sure why this product have lots of bad reviews. It was on black Friday sale so I picked up both colour, I have a very low end printer and once I used this filament I noticed big difference between my old filament and this. My print quality increased dramatically I'm very pleased with this material and I'm glad I didn't listen to all this bad reviews and pulled the trigger on this filament.

I bought this and the white filament from the same brand. The black is pretty bad all things considered. There are lot of "clicks" and "pops" and hissing during printing. This indicates bad manufacturing process. I printed this at 200C and I found that using 0.8mm nozzle this filament had all kinds of problems. It does not extrude evenly which causes the nozzle to catch on the infill despite having a zhop of 0.5mm. On top of that I have found trying 0.3 to 0.8mm nozzles with the same models/gcode it prints worse than the white version of the same brand. This is ok if you get it cheap enough, for doing drafts or prototyping but given that the same gcode with other filament prints significantly better, I can't really recommend this for anything important.