NEEWER 3 Packs Professional Swivel Caster Wheels Set with 75mm Diameter

Added these to one of my c stands that didn’t come with wheels. It does roll a little wonky, but it saved me from buying a new stand & they still work fine for rolling my stand across the studio.

I mounted these Neewer c-stand casters onto my 10.75' Impact turtle base c-stand. I was concerned in ordering these because they say they only fit Neewer c-stands. Well, I can't be more pleased. These fit the Impact c-stand and make the stand MUCH easier to use. The stand weights 20 lbs. Add a boom arm, a mono light, a large softbox, and a 15 lb. sandbag and it is quite heavy and awkward to move around. Adding these Neewer casters makes repositioning the stand with everything attached a breeze. The stand now glides effortlessly across my studio floor. The quality of these casters is exceptional. They are heavy duty, all metal components with large rubber wheels. The wheel locks not only lock the wheels from turning, but also lock the casters from spinning, thus locking the c-stand firmly where you place it. I tested the sturdiness and stability of the attachment of the wheels to the c-stand by standing on the c-stand legs while the c-stand was otherwise fully loaded with light, boom arm, sandbag, etc. The casters didn't flex. The c-stand held firmly in place. And that was with my full 210 lbs. on the c-stand legs shifting my weight side-to-side. I would definitely buy these casters again for other c-stands.

I purchased these wheels for my shorty Neewer C-stands, and I'm really glad I did. Very high quality, and they add 4-5 inches to the height which is perfect for a moveable stand for lighting someone seated with a Bowens lantern.

These are working fine on my standard light stands that aren't C-stands. The legs are still almost an inch in diameter and it fit easily and tightened down great. Did not matter if the angle of the legs weren't on a steep angle as a C-stand. Its only a single wheel and compensates good enough to still roll smoothly, no matter how close or far I position the legs. Seem to be heavy duty, or at least heavy enough for the application which included a 600ws mono light and 60in octobox, including sandbags. Going to get more for the rest of my stands, now that I know they work.

Works really well…a little tough to attach but once on, they’re really stable. Keep a little wd40 on hand for the wheels.

I bought this caster set on the off chance that it might work on my non-Neweer c-stands. As it happens, they fit on both the Kupo turtle base c-stands and on the no-name, stainless steel, tutrle base c-stand I bought on ebay. The casters slip right on the legs of the no-name stand very easily, they feel like they were made for that stand. The Kupo stands require a little bit of extra force when sliding the casters on but no extra tools and come off with a just a little extra twisting force. I use very light weight lights, reflectors and diffusers on my c-stands and I have used these casters to make 20" c-stands a bit easier to move around my studio. The castors do make the rigs less stable and I would not suggest using them for anything heavy or already unbalanced. I do NOT use castors with an extended boom. I DO use sandbags (even extra ones) on the c-stands with castors. I now have a second set of these and they fit the c-stands the same as the first set. I would recommend trying these for any c-stand with 25mm (1 inch) diameter legs.

I have tried castors from three other vendors; these are the best. The others do not steer easily; Neewers are very good at going in the direction I want to push things. I highly recommend them over all the other bands sold here.

These fit on multiple C-stands and we used them on a large scale setup for a T-bar. They held up well and they fit on multiple brands of c-stands. They were so helpful for moving lights and diffusion around quickly that I bought 2 more sets. They are sturdy, and made of high quality material so they have the stability and durability to be long-term professional gear tools in. your arsenal. The locks work well and are pretty easy to engage and disengage with your foot. They spin easily and the wheels are super solid. You have to make sure that you mount them properly or they won't role flat. But that's easy enough to do. The wing-nuts that are used to tighten them are solid and shaped in a way that makes it comfortable to tighten loosen them when you're using them. These are great additions to your studio if you have smooth flooring or carpet and you want to move lights around without the burden of picking things up and carrying the weight of the stands.

Mein Stativ schwebt quasi über den Boden. Bremsen sind super Man muss die Schrauben allerdings echt hart anziehen, damit sich die Halterung nicht dreht.

Best bit of kit I've bought in years, I bought these for my C-Stand that I use with my Anglerfish 300 and china ball. The castors fit well and don't unscrew themselves after every drive. Life is so much easier repositioning the light now without straining my back or risking toppling the stand over.

Robustes et parfaites. Je les Conseille pour une usage Pro.

Cスタンドで使用していますが、取り付けると全高が結構上がります。 もう一回り小型のものもあると嬉しいか？ 構造や材質は全く問題ありません。 タイヤの材質も良いですね。 長期の使用に耐えそうです。 買って正解でした。

Works fine. No complaints