WLJH Red T10 194 LED Bulb with PC194 Twist-Lock Sockets for Gauge Cluster | 3030 SMD, Dimmable, 12V, PC195 PC161 PC168, Instrument Cluster Panel Light, Dash Lights, Nighttime Readability, 6-Pack

I got these for my '02 Tahoe, and they're definitely brighter than the stock bulbs (top is stock, bottom is new white LEDs). There aren't any "hot spots" which was a thing a lot of people in forums warned, which was nice.Only real thing to look out for is the polarity and the plastic mounting tabs. If you twist them onto the cluster as they're supposed to, it overshoots the contact point and they won't work, so you have to turn them back a bit. If they're still not lighting up, pull the bulb turn it around, and try it again and that should do the trick.

I bought them they worked fine and where bright enough for what I wanted them for but after a few days later I would randomly smell a burning smell and It will go away after a few minutes and after that one started to go away and would randomly turn off and then back on. Then started to have fuses pop on me and now I was driving home after work and then heard a popping sound and I was like it’s a fuse I’ll replace it later and then it started to smell like something was smoking and saw smoke coming out of my cluster and instantly pulled over and looked through everything and if you want to buy these and risk your car catching on fire go ahead, not a product I would recommend just go get your self some original bulbs or pay a little more and get a better bulb.

Had to replace a gauge on my boat that had a red backlight. All my other gauges are old white incandescent backlights. Decided to upgrade all my gauges to these red LED replacements so everything matched and it is better for night vision. Just had them out for a night cruise and loved the result.Note that these (and all LEDs) only work with power flowing one direction. If you install them backwards, they do not work. So if you have trouble, try taking it out and rotating it 180deg.

WLJH Yellow T10 Led 194 2825 168 W5W Bulb Interior Dashboard Dash Lights Instrument Panel Cluster IndicatorUPDATE: IT GOT HERE SOONER THAN I EXPECTED. SHOWING BEFORE AND AFTER PHOTOS I am happy with the results. I can now read the gauges. Just remember that the polarity is important and if they don't work the first time, rotate them 180 degrees before you give up on them. On my Suzuki Vitara I had to bolt down the cluster before they would work at all. Another update: I noticed that some complained about flicker. It seems that LEDs are picky about the voltage. If you are putting them in a vehicle that has a dimmer you have to find a "sweet" spot but then again mine got more reliable over time.

The only reason I gave it as many stars as I did. Is because they are nice and bright as it was advertised. But after a few days after installation one of the bulbs started to flash on and off when it became warm. Now I have to take it all apart and install my white led bulbs. These I will return and not buy from here again. As they say you get what you pay for. Sorry to review it like this, but it’s my honest opinion.

At first I was dumb founded, I thought some didn’t work, just turn them around so the positive and negative is on the right side, you will have to use original twist plug in the 86 C10 truck, this ice blue really makes the gauges pop, looks like a black light behind them bringing out the color of the needles

The media could not be loaded.  I don’t know if I got a bad set or net but when I installed these light I was very pleased with the brightness and how they looked....till after a few days to a week then I noticed one bulb was out and the other two started flickering shortly after the first bulb blew. Customer service was very helpful and responsive to get back to me and sent me out some replacement bulbs for the was that went bad. All in all they worked and looked great.

Two out of six bulbs failed shortly after install. On the other hand you get what you pay for and these are cheap.

Fitted these into the dash of my Mazda bongo .1st impressions of them was really good , quality materials used and the fit is superb . The light given off is very bright and lights up the dials great unlike the led bulbs I removed these look like they are well put together and the output is balanced . Very pleased .I waited a while for delivery as came from Asia but truth told it was worth it for a quality product . ( the delivery date was advised - I just didn’t read it properly )I purchased other bulbs whilst waiting and so glad I decided to install these as they are crisp and clear 👍⭐️⭐️⭐️⭐️⭐️Further update- just under a year on , 3 of the bulbs have failed , so due to the long delivery time over other items on Amazon then I’d order more or like me , you’ll find you are having to purchase different items to replace all the bulbs again rather than wait for delivery . Sorry have deducted 2 stars for this

nice

The white cap is so flimsy attached that it fell inside the lamp. Was a pain in the a$$ trying to get it out.The body of the bulb doesn't allow to properly push it in the socket and it barely makes contact.Overall, not recommended.

Don't waste your money. These lights are very poor quality. Put these in my gauge cluster a month ago. After 3 days some started to flicker. A week in and the first one burned out. Now all but one have burned out already and now I have to pay to have them replaced, again...

Love the bulbs .when they work..as they constantly continue to flicker on n' off... as well .. I'll never buy from this seller again as it took over a month to receive them ..that's wayyyy too Lonnng A Wait!