HOMERECOMMEND Metal Daybed Frame Twin Day Bed,Black Sanded Color

Despite 3 dents and a spot of peeled paint I give it 5 stars. I read reviews that complained about how complicated it was to assemble - I am a 69 year old lady who does happen to be handy with simple tools - assembled it all by myself. The instructions were simple A-B-C to follow. I laid out everything first to be sure that everything was present - there was, as well, an an extra of each screw/washer. The one thing that did set me back a minute was the installation of the support bar/rail that holds the legs underneath - there is nothing in the instructions that lets you know that there is no “center” slat onto which to secure the support rail with the legs. There are 10 slats so I counted to #5 and measured to the center of the support rail and attached it to all three points. I discovered later after I had tightened all the screws that the support bar/rail was not centered so I did have to take it back apart. The instructions state that this is a two person task - for lack of a second person I just assembled what I could flat on the floor, then, used a stool or edge of a couch to prop pieces up so I could attach them. Instructions say it takes about 30 minutes to assemble - since I had to take back apart the support rail/legs and I was doing this alone, it took me about an hour and a half. The weight limit is listed as 300# - any two of my family members sitting on it would be over that. There were reviews which complained of bent or broken bars and rails. So, to keep the weight evenly distributed on the whole thing, I placed a piece of 1/4” plywood measured exactly the width/length onto it, then bought a 14” table leg and screwed it under the plywood right in the middle about 3” back from the front edge to keep the weight off the front rail. Bought a twin size bed-in-a-box mattress and now have a beautiful and sturdy daybed in my den. I do wish I could have found a 6” because it is a little high. No rattles, wiggling, nor squeaking at all!

My son just assembled the bed and he says its sturdy. most complaints on line are errors of the people. I had my son do it as he has put 3 sets of bunkbeds down twice.and put them back up. 1 was metal. you learn from experience..Biggest thing to pay attention to is not tighten it down until its completely assembled make ure you put all bushings on. i dont have the mattress yet but so far its good

Decent quality for the price. It feels pretty durable and doesn’t creak or make noise. It fit my standard 10” twin mattress perfectly. The only con is the included instructions are pretty bad. I was able to put it together myself in about 2 hrs at a leisurely pace, but I had so do a lot of guessing for assembly due to poor instructions. There is a major lack of orientation of pieces . I read through it and thought about it a lot before I began assembly. I left everything really loose and only tightened it up at the end when I figured out where everything went. Overall, satisfied with my purchase

The bed is very nice once put together. I did have to think outside the box because the directions were not very good. It all went together in the end but not exactly per the instructions. I didn’t have any dents or rust on my bed frame. I put it together by myself in about 1.5 hours.

I’ve had this for just short of six years and it is held up wonderfully. No nicks or chips in the paint. It wipes clean with a damp cloth or wipes and the finish is a soft creamy white matte. It looks as good today as it did on the first day. Would definitely buy again, but there’s no reason, it’s going to continue to last for a long time.

One of the pieces was slightly deformed/dented which made it incredibly difficult for another piece to slide into it. I really didn’t feel like returning this huge box, so I just bent it back into shape with a hammer and forced it in. Which worked, but was annoying to deal with. Overall it looks pretty good, despite the assembly being frustrating due to the deformed piece. It’s a bit wobbly, but feels relatively sturdy.

My husband and I put the bed together in an hour or less. PAY ATTENTION to the writing at the top of each page of the instructions where it says NOT to tighten ANY bolts until you have the whole frame together. If you do that, all will go smoothly. The seller put in one extra screw, nut, etc. just in case and we did have one screw that didn't want to go in as well but we switched it for another and it did fine. Go figure! Anyway, for the money, this bed is great - sturdy, nice-looking and comfortable with the mattress we put on it. We have company so I slept on it last night and was very pleased. I'd recommend it for sure.

Easy to set up and very durable.

Ok so build quality is just ok. No instructions and if they only did a better job at thickness of metal and a better coating of paint. Maybei got inethat was at the end of the paint coating but its a gritty feel and more rough than a ssmooth paint