TotalMount for Wi-Fi Routers, DVRs, and Gaming Consoles

This product was surprisingly good. For my purposes it was better than it needed to be. The drywall screws provided were very easy to use. I attached one side of the mount to a stud but I think for most purposes the drywall screws would have been adequate. I was surprised that they had channels in the plastic for the straps. This certainly made the molds for this product more expensive to make, but it made the straps easier to thread through the mount than if the had just made it so the straps went between the device and the wall. The product had a level. For my purposes it would have been fine without that but it did make it a little easier to install. I mounted two routers (one was our network router and the other was a router that provided a land line telephone) side by side in this mount. I separated them a bit so as to allow each to cool. It was a nice improvement over having the routers flopping around on a desk and periodically falling on the floor. I gave it five stars overall. It was nicely built, I couldn't see what they could have done better, the price seemed reasonable and it got here in a timely way.

Works as stated. Mounted my one-connect box behind the tv. Very secure mount.

Bought it to wall mount my wifi router. The whole thing is very small, but the straps are very long, so it can support many devices. The straps also get reasonably tight. Installation is easy, it's nice that it comes with a level. Annoying that it only comes with six screws, and no drywall anchors. So you either have those, have to go get them, or screw it to a stud (which you probably should do depending on how he heavy the object you want to mount is).

Easy to install and is holding up well 1 month later.

I struggled to find a mount for my PS3 slim and as I already have TotalMount's PS4 Slim mount, I had the utmost trust in this one. Installation is already easy and made easier with the built-in level. Simply hold level and screw/drill in screws. But honestly, one of the best things about this mount are the included screws. Their thick threading ensures that the mount being ripped off or loosened is almost impossible. As for the quality of the mount holding my PS3 Slim, which isn't exactly light (7 lbs), no complaints. It was pain to set up within the straps as I needed a second set of hands, but it is very secure and I trust it's not going anywhere. But as a tip for anyone installing heavier objects, make sure the adjuster buckles are near the top. Because of the PS3's weight, it unavoidably weighed the straps down so I found that tightening the console near the top secures it in places without gravity playing too much of a role. But I recommend do trying to avoid using this mount for heavier things in general.

I used it to mount a router off the floor. Easy install and works well

The mount is much smaller than I had originally thought but that does not really pose a problem as the straps are excessively long allowing for large items. It is very straight forward and easy to install. The plastic buckle on the provided straps are less than impressive as they do not tighten as much as I would like. That having said that I'm not in fear of it falling because each is secure and snug against the console. If your item is larger than the mount than it will be able to move length-wise as the straps are not connected to the mount but rather you push them through the provided slots. On my next install, I'm going to try using a wedge or clamp that will keep the straps secured to the mount to mitigate this. The install hardware consist of 6 bear-claw style drywall screws. These are have very poor quality control as 2 of the screws had 1/4in metal shavings attached to them one of which sliced open my finger during install. I was using a simple screwdriver and was being moderately careful as to not damage the plastic. I recommend using anchors that you are more familiar with. Also I will be using washers next time as the holes in the plastic have a small lip in them that the screw is supposed to snug up to and I don't feel as comfortable with it after actually mounting the console. I did a fair amount of tugging on the straps to try and tighten them and was worried I may pull the mount loose. Over all, I very much like this item. It is very versatile and you cannot beat the price. i will defiantly be buying this again and using my own hardware to mount so that I feel more secure putting expensive items 6 ft off the ground. Darin ( Electrician, Handyman, Tinkerer)

This defintely can attach a heavy device to a wall and hold it in place. I was goind to use it for a cable model but found (for my partiular modem) the straps covered essential modem ports. Just do some careful measurements before your order to be sure it fits your intended application. Not measuring before ordering was my fault; the device itself appears well made and should keep your item safe.

i mounted a class D amp behind a tv with this. with the bidirectional straps it was my only option. it was simple with an amp twice the size of the mount. the level bubble is pointless and gimmicky. This should not be more than 25 dollars.

'

Lo utilicé en mi modem y quedó justo como lo necesitaba. Las correas las recorté y listo!