Tool Storage Heavy Duty Durable Garage Trolley Workshop 3 Tier Wheel Cart Shelf HYGRAD® Red

Comes in kit form. There are about six million nuts and bolts, but it's very easy to put together. Not the sturdiest trolley, but then it was extremely cheap as these things go. You could buy a Snap On one if you remortgage your house and donate one of your limbs, or if you're a mere mortal, you could just get one of these. I'm only a hobby machinist, but mine's loaded up with reasonably heavy milling and lathe tooling and is absolutely fine. Recommended.

Actual trolley isn't too bad, but the castors are the cheapest tat in the world. The ball bearings have nothing to hold them in place apart from grease so they literally fall out as you push the trolley. Upgrade the wheels and it'll do the job but the ones you get with it are pretty much useless.

64 nuts and bolts and a fair bit of blue air. If you have big fingers you will struggle. A fairly big cross head screwdriver and a 10 mm spanner needed. Don't tighten and of the bolts fully until you have all the shelves in. you need to square the whole thing up as you tighten.Then the wheel. I decided i would put the bolts in from inside the shelf. No problem. Until you find the two swivelling wheels cant swivel as the threads foul them. I didnt want the nuts and excess threads sticking up in the tray. So I used an angle grinder to cut the excess off.. Also the swivelling wheels are not handed so the brake on one will be on the inside of the wheel.Once it was all tightened up it was solid and will do the job

I bought this from the main image showing the full width steel handle, now it’s arrived and realised how flimsy it is, I’ve seen all the other images showing a narrow, hollow tube that certainly isn’t anything like substantial, and neither is the entire thing. The castors are about as cheap as the manufacturer could find l expect, and wouldn’t last a week if using this thing in a workshop environment as advertised, in fact I remember my grandma’s wooden tea trolley being much more substantial than this. Regrettable purchase, returning it.

Perfect.Turned the top shelf around for a flat surface.No other wheel trolleys were big enough but this is spot on.

1 tray longer than other 2 and holes in handle don’t line up with anything so had to be a bit creative when putting it together

One of the angle corner uprights was drilled in error then re-drilled and painted over. Still strong but not the best look. A replacement corner upright would be good please.

The bolts supplied were all so badly threaded, I couldn't actually put it together. Factor in the separate purchase of a bag of nuts and bolts. Disappointed!