Advanced Graphene Ceramic Coating for Cars(70ML),12H Graphene Coating for Auto Car Detailing,10+ Years of Long Lasting Car Protection,Gloss Hydrophobicty Anti Scratch

I applied this graphene ceramic coating to my black boat, and the results genuinely impressed me. Black surfaces are notoriously unforgiving because they expose every swirl, smudge, and imperfection, so I went in with high expectations and was not disappointed. The application process was straightforward, and the coating leveled nicely across the hull. Within a short cure window, the surface transformed into what I can only describe as a mirror finish. The depth and gloss are exceptional and noticeably superior to traditional carnauba or standard ceramic products I have used previously. I waited 6 days after application before taking the boat out on the water, allowing the graphene coating to fully cure. The first real test came when I brought it back in. A quick rinse was all it took, and the surface came out completely spot free with zero water marks left behind. Every wax product I have used over the years required more effort and still left something behind, so this result genuinely surprised me. The hydrophobic performance goes well beyond what conventional wax can offer. The manufacturer claims 10 or more years of protection, which I cannot verify this early, but the initial adhesion, surface hardness, and that first post water rinse give me real confidence in the long term durability. I am including photos showing the finish after application. If you have a dark colored vessel or vehicle and want a coating that outperforms wax in every measurable way, this 70ml kit is worth serious consideration.​​​​​​​​​​​​​​​​ One last thing, the mirror finish is so intense that what you see in the photos is the reflection of my garage floor. You can even see the dirt on the floor (I haven’t washed our floor after winter).

I was gonna spend $1000 to have a detail do it I bought this for $20. I did it myself. This stuff works awesome.

After testing pretty much all "over the counter" ceramic style products this is my first attempt at a long term solution thus my expectations. This product was packaged well and comes with clear instructions. I did a full clay treatment and paint correction before applying to ensure I was starting with a clean and prepped surface to give this product its fair shake. It went on smooth and easily. Following the instructions, comes off just as easy. If you take on too large of a surface and let it start to dry too much it can be more difficult to take off, naturally. The 50 ml bottle lasted just barely over two applications on my small car. Initial impressions: I'm underwhelmed. Decent beading when it was rained on, but little to no water sheating and it doesn't repel dust/ make dusting easier anywhere near as well as I expected. I absolutely don't expect this product to last more than a few months. However, I won't find out as I've already sprayed turtle wax ceramic spray on top (which is the best spray ceramic on the market in my educated option). This will allow for the ease of dusting I'm looking for. Overall I'm still giving four stars for the ease of use and shine it gives after properly treated. For 20 bucks I don't think I could do better. The images I added are: in my garage post treatment, outside on a sunny day, and after driving home in the rain.

Very easy to use, but it takes time. It’s so shiny it doesn’t even look black anymore, it just reflects. (See video) you can see the sky and clouds. I had a lot of small scratches do to car wash, these cover them up pretty good, since the scratches are so small and down into the clear coat. I don’t know about longevity yet, but absolutely worth the money and time. If it doesn’t last I’ll come back with review, but I would be happy with 6 months honestly, because I finally found something to cover the care wash marks for a black vehicle.

I'd like to start by saying I've tried 4 different ceramic products and out of those this one was likely the best value and easiest to use. The thing is if you don't follow the directions it's easy to mess things up and then you will spend a long time trying to remove it with something like alcohol which is the only way to really remove this stuff once it's cured but I didn't learn that due to this stuff but rather a competing product which likely was very similar to this I just didn't follow the directions so I think it's safe to say this would likely do the same except with this I followed the directions well so my results were much better. Make sure after you apply that you go back over it all with a microfiber and buff it well before it fully dries and cures this way you even out the coating as well as possibly can that is where I made mistakes I applied the other product and didn't even it out and had high spots all over the place and had to remove everything just about but aside from that it's actually super easy to use these coatings and they work so damn well. I also tried the turtle wax ceramic line both in paste wax form and liquid wax form and whole those products do work well they are harder to apply and don't work as well as these actual coating products. The turtle wax products might be better used as a topper product or something you use on top of these ceramic coatings to boast the hydrophobic nature and make the coatings last longer. That being said I definitely would recommend this product to anyone just know what your getting into and know how to properly install this stuff by watching some videos first. It's important to also clean the car well and remove all wax prior to application.

I had decent expectations, but honestly it wasn’t that great. The coating looks shiny at first, but after just two car washes, the gloss is mostly gone. Application was easy, but the durability doesn’t really match what I expected from a ceramic product. It’s okay for short-term shine, but not long-lasting.

This is legit. Easy to understand instructions and great results. I applied this to my Lexus front badge which was hazy and I topped it off with this Advance Graphene Ceramic Coating and it looked brand new. I avoided spending $580 for a new emblem, oh and it doesnt affect the adaptive cruise control either.

I’m not a professional, but a hobbiest for 8 years that likes to test products for fun. I do detailing for family and friends for free trying different products out. I tried this stuff on my wife’s new to us white 2023 Mercedes with 14k miles that was garage kept and babied. I did a two step paint correction, since the previous owner liked to keep it clean but clearly wasn’t aware he was adding swirls with every wash, and alcohol wipe down before applying. It was very easy to apply and remove. Did the whole car top to bottom including headlights, taillights and glass. After a three days in the garage, I applied a second coat. First real life wash was a week later and everything looked good. Second wash another week later and it was still ok. Beading was fair. Always used CarPro Reset for washes and foam cannon. After a month of heavy pollen it was time for a wash that would last more than an hour before being layered in pollen again. Every inch of the coating was gone. Not a single part was left anywhere not even the headlights or taillights. Sheeting water like nothing had ever been applied. Not really surprised for the price but I was expecting it to last more than a month. This car is barely driven, sits in the shade all day and had minimal rain in that time. I even use a professional car drying blower, no towels to dry. There was no reason for it to fail that fast. If you’re up for redoing the coating every month then this is for you. It did give good shine those first couple weeks. But I recommend anything else for something that’s long lasting.

はじめは効果テストをしたところ、固まらなかったので不良だと思いましたが。 ５mmほどの厚みでテストしたものはしっかり固まり１か月たつ頃にはしっかりと硬化し、固いナイロンのようになっていました。 ボディーに塗れる量が薄い皮膜程度になるため、恐らく小石などに耐えうるものではないですが、洗車傷くらいならかんわしてくれそうです。

Bought a new car, saw swirl marks getting made, so decided to use this. I am a novice. Looked at all the videos and cleaned the car, after it dried I applied one coat across- I have an suv . Used up half the bottle coating all the windows, panoramic sunroof everything. It protects the shine and dirt comes off easily. Also marks are less, thought it doesn’t protect from anything else, like a bike guy touched my car door with his handle, it has a tiny hold in the paint now. Overall would recommend, doesn’t come off easily and is hydrophobic

Per adesso funziona. Vediamo quanto tempo sarà attivo

Tres bon produit facile a utiliser

Good product for DIY. Did a Red Tesla and it came out well. Patience and process is required in the prep. Didn't have time so gave it a quick wash and dries it and applied the ceramic. Came out well. Approx 3-4hrs for a car. Previously paid AUD$1200- $1500 for ceramic. Tried DiY first time and for $50, you can't go wrong. Comes with applicator pad and buff out cloth. Nothing else required.