🛵 Ride with Confidence—Protect Your Rebel!
The ECOTRIC Engine Guard Highway Crash Bar Protector is a robust safety accessory designed specifically for 2017-2023 Honda Rebel 300 and 2017-2024 Rebel 500 models. Constructed from heavy-duty steel with a weather-resistant powder-coated finish, this crash bar offers unparalleled protection for your motorcycle and its rider. The easy bolt-on installation requires no modifications, making it a hassle-free addition to your ride.
Color | Black |
Brand | ECOTRIC |
Vehicle Service Type | Motorcycle |
Auto Part Position | Rear |
Installation Type | Bolt-On |
Finish Type | Powder Coated |
Manufacturer | ECOTRIC |
Model | ET-480-Z1 |
Item Weight | 6.32 pounds |
Product Dimensions | 13.39 x 12.6 x 6.1 inches |
Exterior | Smooth |
Manufacturer Part Number | ET-480-Z1 |
B**S
Sturdy and easy to install...
I mounted these on a 2019 Honda Rebel 300. The installation was easy, only a few bolts per side. It is a glossy black which contrasts with the satin finish of the frame. So, I scuffed up the powder coat and painted it before installing. I think that they look good and seem sturdy enough for this small motorcycle. Also, it gave me a place to mount some pod lights that should help with visibility.
C**S
Not safe minimal engine protection
Only good thing about it is the bars were fully painted everything else is an engineering abortion. It sits WAYYY to high on the bike all the nuts and bolts provided will rust easily. Nothing lined up accurately. The bars were bent wrong so they can't even fully seat into each other. There's no place for the horn to get reattached and absolutely no instructions. The top screws are too long and even so I could not get them tight enough for it to not move on the bar so say bye bye to it in a crash. If anything it adds an extra hazard and damage to everything. If I haven't mentioned it yet there are absolutely no instructions so maybe I'm supposed to bend bars and make other modifications for this to work properly but I'm not convinced it would even be worth it to make it actually work and be safe. Even for looks this is garbage. Nobody needs this much nonsense in their life.
T**Y
Tight fit on a Honda Rebel 500
Overall it looks good and seems sturdy enough. the fitment is a little and on my Rebel 500 you have to put the bars on with the lower hole otherwise the top mounting clamp make contact with the engine.and the included bar for the bottom is useless, as it is barely long enough to make it all the way through and the nuts and bolt that it is replacing also act as the mount point for the horn.The lack of instructions is annoying but the installation is easy enough to figure out.
T**M
Saved My Bike
I have gone down low speed into a car at 3omph, saved my engine and frame! The bars bent but it saved most of the stuff so thats what mattered. It was easy to install, some parts didn't line up as easily but it was manageable. The long rod that goes through the engine was machined a little off and a little long, but a few washers fixed that. It looks great and works fine for what it is.
I**N
Good choice if you know what you are doing
It does not come with instructions to assist if it's your first time doing this also it dosent come with anything to protect the motorcycle from scratching so you need to be extra carefull when installing. Besides this it does look and feels well for the price.
M**O
30 minute install on 2024 Rebel 300
The media could not be loaded. The bars are solid and straightforward to install. I used four basic tools and some lubricant to help with the joint connection.They offer good protection for the engine, gear shifter, and parts of the rear brake. The black coating looks sharp, though it would be even better if the hardware (nuts and bolts) matched in black.Installation Steps:1. Support the engine (I used an auto jack placed underneath).2. Loosen the main engine bolt.3. Carefully tap out the original bolt while feeding in the new one.4. Install the left bar onto the new bolt and upper clamp brackets, but don’t fully tighten yet.5. Lubricate the joint connections.6. Install the right bar the same way; use a rubber mallet if needed to align the joint.7. Cross-tighten the bolts for a balanced fit.8. Check for even alignment across both sides.9. Tighten the joint nut using an Allen wrench.
G**D
Take your time and figure out where everything goes before you get started.
The media could not be loaded. This crash bar fit perfect on my daughters 350 Honda rebel. Start to finish maybe 30 minutes very simple if you pay attention to where everything goes. Even though there are no instructions it’s not hard to figure out if you’re a little bit handy with tools. Everything went on nice and smooth and so far I’m very happy with it. It looks good on the bike.
R**R
The product cannot be installed as there are missing pieces and no installation instructions,
The product cannot be installed because there are missing screws and bolts and the installation instructions on top of that the product is dirty I believe that it was one that has been returned and simply put the stock and sent to me I will be requesting an immediate refund
Trustpilot
5 days ago
3 weeks ago