Photo Light Box Large Kit 39x39in/100x100cm Dimmable Studio Professional Cube Shooting Tent Box with 96x4 LED Lights Strips 3X PVC Backgrounds for Jewelry Product Photography (15000lm,CRI:95+)

This is the perfect enclosure for the Anycubic I3 Mega 3D printer!The 24x24x24 size is large enough to enclose the 18x18x18 printer leaving extra room for the filament roll inside the enclosure.The way the entire front panel unzips makes it easy to place the printer straight into the enclosure as well as work on the printer while it is still inside the enclosure.After you zip the face panel, the opening is ideal for checking the printer during printing.During printing you can can close the flap in order to reduce noise and maintain the heat inside the cube.The silver material of the enclosure lining is ideal for holding in the heat and reflecting light.There is a small hole on the top left side of the cube so you can feed in an extension cord in the enclosure to wire a circuit breaker inside the cube to power the lights and printer.The lighting is perfect when you mount the light strips vertically to the two front corner poles.You can see the project print with no overhead shadows from the print head.This lighting is perfect for making time-lapse videos of the printing.They even give you a small tripod with cell phone adapter with the kit which is perfect to use for the time-lapse videos.The only extra thing I added was a platform to raise the printer a few inches so I could see and control the printer panel more easily when the flap was open.There is an opening on the top of the enclosure where you could feed the filament in from the top if you wanted to place the filament holder on the top of the enclosure instead of inside the enclosure.If you wanted to move the printer and enclosure to another location, the cube box breaks down easily and all fits back into the travel bag.• Large enough to fit printer.• Can be completely enclosed to reduce noise and maintain heat.• Can be partially opened to check printing.• Has lights so you can see project being printed.• Easy set-up and installation without modifications.• Does not need to be removed to work on printer.• Breaks down to a compact size when not in use.• Portable!

I am using this as an enclosure for my Anycubic i3 Mega 3D printer and it works great! Fit is perfect with plenty of room. Included lights are great. It would be nice if this had a clear window to see inside but otherwise it's a great solution for housing a 3D printer!

I bought this item to help boost my E-Bay Business. I live in Florida where taking a photo is frequently difficult to do because of the constant change in the weather and lighting. I needed a photo studio that could accommodate larger items since my resale products are often larger than 24" in height. I chose the 27"X27" size so I could take great photos without being worried about space. This Photography studio is great, it was easy to put together and is easy to use. I do not transport mine and have the space outside of my actual house to keep in in place. Taking it apart and putting it together a lot would get very annoying very quickly so I did knock it down a couple of stars for that. It's not really portable because it is not quick folding and it IS very large ( wont fit through a door if assembled). I was considering the Amazon Basics one before this, but do to them jacking up the price after Prime Day I decided to go with this one and am very happy. Another possible negative, is the item says they are LED lights, but they do give off a lot of heat! I take my photos in a small space so it does heat the room up rather quickly! All in all I give this studio 4 stars!

I bought this product to take my own product pictures and I was pleasantly surprised to find out the Photo studio shooting tent box has good quality material, easy to assemble and easier to put away in its carrying bag. The LED lights are brighter than what I need but I can always adjust the dimer to my specific needs according to what I'm photographing, I liked the size of it not too big not to o small It works perfectly.

I purchased this to take photos of my framed art prints. It's pretty straight forward to use. I'm still learning about placement, glares, and lighting techniques for taking photos with my phone but so far I am pleased with the results. Once I get a big enough table I think I can navigate around this a bit more because it is huge.Pros:-LED lighting is super bright and adjustable-The lights can be attached to other metal pieces separately for other projects- lightweight-the clamps are strong-the backdrop can slide into built in pockets at the bottom for a seamless backgroundCons:-all of the LED light strips require a separate outlet so you will definitely need extension cords or total use of your standard wall socket.-sometimes I have to keep sliding the frame into the cube but usually when I zip the front down on the sides more, it's not as bad-you have to adjust the light strips separately, I'm sure this is envitable in any photography situation but it's such a pain- those clamps are strong I couldn't figure out how to use them for the first 5 mins but they do the jobOverall, it's a great product so far

My only draw back is you can only plug one led panel up at one time

I love that I can use this for photography of any size item in my collection. I have a very large collection and having a light box I can use from some of my biggest plush to my smallest figures is a game changer!That being said, I love it’s size but it’s not practical for the giant plush and requires editing. Which is fine, I didn’t plan to use it for my giants. The size may be a little excessive as I have to disassemble it to get it through my doorways (which is fairly comical), however, its set up is a chore. I broke a sweat getting the tent on and trying to fight with those clips to get the white backdrop up.Either way, I was buying it for my collecting group to test out and I’m going to recommend it to them! Albeit, maybe a smaller version!

material kind of cheap but works well

I was shopping around and doing a lot of comparisons of light boxes. I finally settled on this one in hopes that it was "the one". Best decision!!! Relatively easy to put together, but with the assistance of another person. Once it was assembled, it was pretty easy to add the lighting bars. Simply plug the lighting into a power source and you're ready to go. Although there were backdrops supplied with this box, I did purchase alternate ones (needed textured ones). The frame is extremely sturdy. Really like that the inside is lined with a metallic fabric that works to select the light....so no need for additional components for that purpose. The LED lighting controls are easy to adjust and offer the ideal brightness/dimming capabilities. Highly recommend!!!!

The product was easy to set up and works okay . However, I can only give it three stars for the following reasons:(1) Manual is very terse and mostly just a pictorial guide to set-up in multiple languages. It could have more information about shooting for someone who is using this type of equipment for the first time.(2) The LED lights don't stick to their magnets as well as they could. A little bit of jarring knocks them loose and they have to be reset.(3) This is the most serious issue to me: The white plastic background works great as it is very reflective of light and hence creates a bright white under the LED lights. But the black one doesn't work well at all for exactly the same reason. They are made of the same plastic which is way too shiny for a black background. The company should supply a much more light absorbent black background or notify the consumer that the one supplied doesn't work well. I've tried it under both the supplied LEDS and under ambient light. If you are going to use this product, you may want to separately purchase a less reflective black background, such as a piece of black velvet cloth.Also, Amazon's product heading description is incorrect: There are three backgrounds; not four.

Perfect size with different camera inaccessible angles. Very happy with this light box.

I bought this in February. It worked ok at first, the lights were never bright enough and it was super awkward to move them around. I used it maybe once a week for 10 minutes at a time to photograph small items for a website. When not in use I left it unplugged and turned off. In June the lights stopped working altogether. One day they turned on, one day they didn’t. I now have a huge, useless black box sitting in my house and the return and product support windows have closed on Amazon so I’m out of luck. As mentioned, I barely used it. It’s just a garbage product.

Je ne regrette pas mon achat. L'éclairage est magnifique, support robuste, très facile à monter.