Hbada Office Chair Ergonomic Desk Chair, Office Desk Chairs with PU Silent Wheels, Breathable Mesh Computer Chair with Adjustable Lumbar Support, Flip-up Armrests, Tilt Function, Grey

For the price of this chair (~under $200), this is not a bad chair whatsoever. Please keep in mind that this is NOT going to be Haworth or Herman Miller quality, I really have no idea what you people are expecting with $130 chair on Amazon lmfao. It is a CHAIR. Good quality, good support. I usually sit in it for max. 4 hours at a time and take frequent breaks, my back and bottom don't hurt afterwards. It is super lightweight and sturdy, I don't feel like it's going to break when I lean back. Plus, you can lock it so it doesn't lean/recline. The foam seems pretty good, no imprints or breakdown yet. The only thing I could think to make it better is to make the seat a bit wider (I'm a female and yes we have hips) but that can be solved by putting the armrests up. Also does not squeak, but I've only had it for a few weeks and I'm sure that will change over time (but oh well if it does). The black and white is a very sleek look, looks great in my office/bedroom. Order it if you're hesitant, the instructions are super easy and you don't need any tools, comes with an Allen wrench.

I would rate this a 3.5 but I'll give 4, reasons to follow. I bought this chair in 2021 for about $32 less than the $159 it's going for now so that may skew my view of this chair somewhat. The chair is very well built, sturdy and durable so far. It was intended to be a stop-gap chair. However it's proven to hold up and has become the daily chair. It gets daily use (every day) and for hours. Sometimes, more than it should. Meaning I should be getting up more often. It's very VERY light giving an impression of it not being that great but that's not true at all. Honestly I'm very surprised it has held up this long. It's creaky getting up and sitting down but it's pretty much quiet in between. It has a nice look and matches well with my desk. The back looks as if it wouldn't be comfortable at all but that far from the truth. I've never had an issue with the back support. This has been another surprise I didn't think was going to be possible. This chair really was intended to be a temp thing being later to be designated to a computer station downstairs that sees very little use. It never made it down there. All that being said there is one HUGE negative that would have made this rating a 3.5 and honestly probably a 3. The seat cushion is not very good at all. Unless you weigh 90 pounds it's not padded enough for comfort for extended periods of time. I had to buy a seat cushion on sale from Costco to compensate for this. So in theory the chair probably cost the same as it does today if you add that expense. So be prepared for that. Honestly I probably bought this more on looks than anything as an identical table was planned to be purchased later and put downstairs but that's not going to happen any time soon with the way things are going.

Comfortable and ideal!

I originally purchased this chair because I was working from home (now mainly use it for when I’m gaming or working on my pc) and after a couple of years of having it and using it daily (8+ hours a day) I have a few takeaways. Overall, this chair is not very comfortable - the cushion started wearing down after a couple weeks of use, and to be honest I never noticed any difference with any of the adjustments for back support. The chair was easy to put together, I’m 5’1 and weigh about 110 lbs, I’m not very strong and it was easy for me to do alone which was a plus. The chair overall is sturdy and the cushions of the armrests have stayed in tact and fine over the past couple of years, however I don’t use them much at all. For the most part I didn’t have any issues with the chair rising up and lowering down, recently I wasn’t able to lower it back down, but that isn’t really a problem for me since I’m short and need it on the highest level anyway. Just something to keep in mind. The wheels are nice and it’s easy to move around. I added two seat cushions to the chair - a gel one and then just a soft one on top that also helps my back and it made the chair much more comfortable but even with that it’s only comfortable for about 2 hours before my legs start to hurt and about 4 for my back. The chair also isn’t very spacious, it’s pretty compact. It’s a decent chair if you’re not going to use it for long periods of time and if you add a seat cushion, it looks really nice and aesthetic but there are definitely better quality chairs out there.

Biggest positive: durability and tremendous value. My son bought himself one of these for college and two years later it's still holding up, so when my daughter needed a chair, it seemed like a no brainer to get her one, too. This is a basic task chair, not a pricey ergonomic wonder. I have a Steelcase Leap that's now 12 years old, cost $1000 when new, and saved my back. It's worth every penny. But for a student using it 1 - 3 hours per day, something like that is overkill; this chair is perfect for 1/10th the cost. Biggest surprise: Hbada designed the chair for very easy construction. The instructions are minimal but everything is well labeled and mostly created in such a way that the only way to screw it together is the correct one. With a power tool it took me less than 10 minutes to assemble, but you can use the included hex driver if you don't have a drill and the right bit and it should still be fairly quick. Biggest negative: the lumber support looks good but it's just for show -- it doesn't provide any meaningful support. If you have serious back problems, well, you need a more expensive chair. Size note: Fits most people, not great for extremes, especially people above 6' with long legs. My son is 5' 11" and it fits him perfectly at the higher settings. My daughter is 5' 4", and at its lowest position her feet are flat on the floor without shoes on. If you're under 5' 2" you'll need a foot rest, and if you're significantly above 6', this probably won't work for you.

I will start by saying that a good chair is important for me. I work from home and can pull up to 16h work days. I ordered this chair because it has fabric covers instead of the cheap leather ones that peel off after a few years, like the Amazon Basic chairs. Positives: This chair looked great, has good specs on paper, and Hbada is related to Xiaomi, a well known Chinese brand. The assembly was easy and the chair is actually quite comfortable. The padding and fabric on the arms make it very comfortable to use. The wheels that come with the chair do not seem to scratch the floor. The negatives: The lumbar support on this chair is close to nonexistent, despite what you can see on the pictures. I ordered a lumbar support pillow, which significantly reduced my back pain. The main thing, however, is that after 3 months of use, the left arm became loose and is about to fall off. I never abused this chair and am light weight, so I do not find this acceptable after 3 months, especially for this price point (I purchased it for $140). My partner, who ordered a chair not long after me, the Hylone Ergonomic Office Desk Chair, spent about the same amount of money, has a head rest, and the chair has more padding / higher build quality. I regret not buyer hers, and will order that one once my arm rest falls off. Even if there is a warranty, I would rather get a different chair. Summary: Strong pass, get a different chair. You are better off with the Hylone Ergonomic Office Desk Chair for a similar price point or spend $50 every year or two buying Amazon Basic chairs.

I usually do my work through my laptop, so I get in all types of crazy positions in my couch or in my bed, I also have a desktop and a desk which I spent a lot of time organizing it and making it to my liking but I hated working on it because I had an office chair that cost me around 220 dollars in Office Depot and it was so uncomfortable to work on for long periods of time you can sit in it and its relaxing has neck support and all but the thing was that it didn't sit at a 90 degree angle so when it came to typing I felt like I was trying to reach for something so far away it would Get annoying but this chair which took about ten minutes to build (I'm young 26) feels so sturdy, Im 5,10 and the back rest goes up to my traps. One thing I love are the rubber scooter like wheels lol they're so fun this chair is pretty fast and quiet, so a seatbelt is one thing I might recommend haha, I love the moving arm rest because I can get a lot closer to the desk so my hands rest directly over the keyboard. One thing that I find weird is the lumbar support thing doesn't really make a difference unless you're really heavy I think I'm 250lbs still my back rest is sturdy enough to hold my biggass. So now instead of falling asleep while laying down doing some work, I can rage at my code and push my chair a speeds you couldn't even fathom.

** 6 month review at bottom ** Have had the chair for a week so far with 8+ hour uses each day. Not the best but not the worse chair I’ve had. Overall, I like the chair. Can’t complain too much at this price point. I was more concerned that the materials will feel cheap, like the plastic but it’s pretty sturdy. It’s decently comfortable if you sit properly. -=-=-=-=-=-=- Here is an in-depth review: — Seat cushion (2/5 stars): The seat cushion isn’t great — unless you sit properly at all times, any weird sitting position will be uncomfortable (i.e if you sit on your legs). If you happen to seat near the middle or front end of the chair and you usually have tailbone pain, you’ll likely get it with this chair. After receiving the chair, within an hour of use, the foam is already dented and does not fully return to its original form. After a few days, I can feel the unevenness on the seat, even after several hours of not using it. Pretty sure it’s permanent now. I’ve purchased a seat cushion to combat this issue. For comparison, I’m 150lb, 5’10”. The seat cushion is about 1.5" thick, you can easily feel the base plate. — Arms (4/5 stars): It was solid and worked perfectly when I first used it. However, due to the arm mechanism, the nut holding the arm in place can get loose if you move the arm up and down often. I found this happen more with one side than the other. Took the arm off and tighten the nut but that only fixed the issue temporarily. After moving the arm a few times, the nut got loose again causing the arm to just fall down and wobble. IF YOU ARE HAVING THIS ISSUE — here’s a fix I've found to worked for me. Go to your local hardware store and find a pack of flat washers and locking washers (washers with uneven/bent ends). The flat washer should be no larger than 7/8” (outer diameter). Internal diameter of the washer should be 3/8”. Remove the arm from the chair and remove the nut. Keep the existing flat washer in place and place a locking washer on top and a new flat washer after. Place the nut back and hand tighten snug. The order should be Flat Washer > Locking Washer > Flat Washer > Hex Nut on the arm’s through-bolt. I’m able to move the arm repeatedly now without it ever getting loose or wobbly. The manufacturer is however aware of this issue and is fixing it as far as I know. So please contact them if you are having this issue if you find that my fix isn’t working. Once my issue was fixed, I’ve find that the arm is pretty solid. The mechanism that allows the arm to rotate is limited by the plastic used to make the chair (if you disassemble the arm, you’ll see what I mean). The plastic is pretty solid, but I wouldn’t put my entire weight on the arm. Who knows, maybe it’s capable of supporting it but I don’t want to risk it. — Mesh Back / Lumbar Support (4/5 stars): There’s not much to complain about for me. It’s comfortable when you have your back against it. But I didn’t notice anything that stood out to me. The lumbar support is pretty non-existent, I don’t even feel it. So if you really need lumbar support, this might not be the best chair for you. — Hydraulic Cylinder (5/5 stars): So far (within a week of use), I haven’t had any issue with it. The chair will very slightly compress when you sit on it, but nothing significant. But I know that I’ll likely won’t see any issue until later down the line. So I’ll try to update this after more use. — Customer Support (5/5 stars): Prior to fixing the arm myself, I contacted them about it and they were pretty fast at responding (within a few hours). Pretty professional and was diligent in making sure my issue was resolved by offering a couple of solutions. So if you do happen to have any issue with your chair, I wouldn’t hesitate contacting them to see how they will help. Would I recommend this or purchase it again at this price point ($139.99)? Yes. ________________________ 6 Month Review (over 1000 hrs of use): With the arm fixed I proposed above, it’s been flawless. No issues with it at all, no wiggle and not lose. That was one the biggest things I feared. Most chairs I bought, it ended up wiggling a lot after a while and couldn’t hold itself up anymore. So glad this one hasn’t had this issue yet. Hydraulic cylinder still works great. No squeaks either when reclining back and forth or swiveling. Still happy with this chair! Would still recommend it. ________________________ 8 Month Update: Typical usage. Chair is starting to creek and make a bit of noise when you rock back and forth. The back mesh is a bit loose now but nothing too bad. Hydraulics still performing as before.

Looks good on the photos but bad quality for the price.

I bought 2 of Hbada. 1 In Arizona in Jan 2021 and then 1 in Canada in May 2021. I love that arms pull up to tuck chair under desk. The seat is comfortable..no sagging even with overweight. Roller like your on water. My daughter recently return home after 2 years away and took over my office BECAUSE of the Hbada Chair. Easy assembling. Just follow the instructions. Trust ME, you'll never be disappointed.

Satified

Quería una silla cómoda y bonita para mi estudio en casa que no fuera una de esas sillas para gamer. Me ha gustado bastante, fue fácil de armar y los materiales parecen de buena calidad. Las astas que soportan las llantas son de metal y no de plástico que generalmente tienden a quebrarse. Ya que solo yo la usare no espero darle un uso rudo pero se ve bastante resistente. El asiento es amplio y cómodo, el respaldo da buen soporte lumbar. Luce tal y como la muestran en la fotografías.

Great quality