Readytosky RS2205 2300KV Brushless Motor CW/CCW 3-4S RC Motors for FPV Racing Drone FPV Multicopter

I ordered a set of four to replace a failed motor on my racing drone (Emax 2204's). These were a perfect replacement and having the bullet connector already in place was a huge plus. Installed in mere minutes. Unfortunately one of the motors was a bit notchy feeling and one sounded odd during run-in (possibly bearing). They were a matched cw/ccw pair, so bad set is my guess. The other two were just fine. Considering the extreme low price of these motors, I knew there might be an issue and was ready to mark it as a lesson learned. What I didn't expect is the quick and friendly handling of the situation. I contacted Readytosky directly per the note in the box, and within a short amount of time received a reply. They were very responsive and helpful, and within a couple of days (due to my delay, not theirs) I had a replacement pair in the mail. The new motors were perfect. Despite the delay in getting the drone back in the air due to a bad pair of motors, I'm giving these five stars due to the excellent seller, and subsequent performance of the new motors. It's easy to praise a no-problem purchase, but what makes the difference is how a seller deals with a problem once the sale is complete. I have no qualms recommending them. And if you for some unlikely reason have an issue, know that it will be resolved. And no - I am not affiliated with or was in anyway compensated for this review (I know it sounds that way - I'd think that if I read it :-)

These work great! I have used 2 of the four so far and they are nice. Work like they should. 10/10

I purchased these motors as replacements for my 1208 2300kv quad motors, and installed them with no other changes (using stock beta flight pids.) They work well enough, but are fairly under powered compared to the 1208s I had been using. Current draw is a fair bit higher, as expected, but downsizing from 2200mah to 1600mah fixes most of the issues (at the trade off of flight time.) 6 batteries in and I've not had any heat buildup issues. If you've got a really light 5" quad, these are decent motors.

For this price you really can't go wrong. If you lose motors to crashing more than burnout, these are your new go-to. I'm so happy with the performance at this price point, and it significantly reduces the fear of crashing. The Good: Reasonably balanced, reasonably quiet - better than I would have expected at this price. The Bad: 2 of 4 motors have a slight bearing rattle - very slight. For the price this is hardly a drawback. The Ugly: At this price I can't really complain that they aren't super-robust or don't last for hours of flight time. I haven't had them long enough to abuse them yet, but even if they get destroyed in a crash it's only like 8 bucks to replace one so who cares?

They work. The motor leads are very short. They have a rattling kind of a sound but that may be crappy bearings i dont know. But for cheap motors they are okay. I had a set of crazy pony's a while ago that were much better than these for $5-$10 more. If you're on a strict budget get them but i'm already upgrading after a couple weeks.

Quiet, powerful on 4s. Good motors so far, have about 20 flights on them now.

These are poor quality motors. They cut-out periodically while flying. I’ve tried running them on multiple ESCs, propellers, batteries and aircraft but the problem is persistent on the three that I have used. After replacing the motors with equivalent, but less expensive, motors from other manufacturers, my motor issues are gone.

Great motors. Bought for a budget build to see if it was possible and it was. On 4s they do get pretty hot so be mindful and fly accordingly.

Leider sind 2 der 4 Motoren defekt und drehen nicht hoch, bzw stottern nur. Somit kann ich keine Angaben zur Funktion sagen, aber da andere ähnliches Beschreiben, scheint es hier massive Qualitätsprobleme zu geben, lieber 20-30€ mehr ausgeben... Im Video zu sehen 1x ein defekter Motor und 1x ein funktionierender.