LEOBRO Resin Mixing Cups Silicone Measuring Cups for Epoxy Resin, 250, 100ml Reusable Epoxy Resin Mixing Cups, Silicone Pouring Cup, Thick Hard Stir Stick, Finger Cots, Tweezers

These are great. Genuinely re-usable. The only issue is that the measuring lines are hard to read.

Very useful kit for resin

I purchased these for measuring and mixing resin. You get 3 measuring cups in two different sizes. The 250ml cup is made of good thick silicone which is good since it's holding a large quantity of resin so I don't want anything too flimsy. There are markers to measure in millilitres or fluid ounces. These are nice large print and raised on the outside which makes them easier to read.The two 100ml cups are thinner, a little thinner than I would like really but still suitable, although I wouldn't measure out the full 100ml in them as there's not much excess at the top so I'd be too worried about spilling my resin when stirring.These smaller cups only have millilitre markers on them. The markers are not raised on the outside as they are on the large cup and so these seem a bit harder to read once I get the resin in the cup. For some reason they are raised on the inside of the cup though which i thought was strange but they're still perfectly useable. I just tend to use a marker to highlight where I'm measuring to to make it easier and that just wipes straight off afterwards.The plastic stirrers are good. They measure approximately 15.5cm in length and are sturdy enough to mix with. Previously I was using wooden lollipop sticks to stir my resin but I've found these stirrers create less bubbles so I'm sticking with these from now on.You also get two pairs of tweezers which are good for adding decorations to my resin accurately. They're pretty basic but they do the job. I haven't used the finger covers yet and I'm not sure I ever will but overall it's a good set.I much prefer measuring and mixing in these reusable cups instead of spending money on disposable ones as it's cheaper and there easy to clean afterwards. I do have some other 100ml silicone cups that I prefer over these ones because they're slightly thicker and easier to read but for the most part I'm pleased with these.

They are great and easy to use and clean. The do work well and great to measure different quantities

Specialising in resin items I go through a lot of containers and really disliked the waste plus I was getting very stressed if I couldn't find a spare! These are absolutely perfect. Firstly the measuring marks are nice and clear and the 250ml size is ideal for bigger projects. I also found that the residue left in the jug once poured was minimal especially if scraped using the stirrers. Once you are done leave for the cure time then get out any access resin like you would with a mould & wash with warm soapy water. My advice would be when holding the jug use your little finger under the base this makes it more secure to hold & I would suggest mixing both the resin and hardener in the one pot so that the left over mixture sets for you to remove (rather than measuring resin in one, hardener in another and then pouring together).

AS Described. the silicon makes it so much easier to clean up once the resin has set

I love these I would buy them all the time highly recommend great product sturdy, value for money, plus they are the perfect size for me

Resin cups are made from silicon so that you can peel off the set resin and reuse the cup afterwards for your next mix.Some sets require a lot of resin so multiple lots need to be made up and this helps a lot.A few plastic spoons and measuring equipment helps you to implement any glitter or other things you wish to add and remove any bubbles.Resin is very very very messy even with gloves on it can get anywhere so bear in mind!

Great for liquid paint pours.Super easy to wash after using, paint peels off with very little effort if left to dry.I can barely read the measurements on the cups though, finally dawned on me that they are written on the INSIDE of the cup.So I just need to remember 20 line, 40 line etc.These are by far my most favorite mixing/pouring tool I have.

Die Becher sind perfekt um Raysin anzuführen und in die passenden Formen zu füllen.

Super

I use these for UV resin and they work really well

I really needed a bigger cup for my resin projects and had a hard time finding one in silicon so I was pretty excited by this bundle. I didn't have need for the tweezers, although I'm sure I'll find plenty of use for them in the future. I don't love the stir sticks. They're fine and nothing wrong with them, but I personally like a flat edge and prefer a popsicle stick. But overall, the set seems great so far!