BalanceFrom Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Front Wheel Riser

I was somewhat reluctant to purchase this based on some of the product reviews, but I rolled the dice and was NOT disappointed! Let me refute some claims in other reviews: (A) It is VERY easy to assemble. There is ONE bolt to install the resistance wheel to the trainer frame. The instructions are pictorial only, but every screw, washer, bolt, and tool (included) are labelled. If you can follow "align bolt A with washer B into hole C and tighten with bolt D", you'll be fine. Its not rocket science. After attaching the resistance wheel to the trainer frame, be sure to align the tightening screw (with the big nob) into the bolt on the resistance wheel. Again, its not rocket science. (B) Attaching your bike to the trainer frame might be a little awkward the first time, especially if you are doing it by yourself, but its not difficult. After you get it right, removing the bike and reattaching it is easy. With some bikes, you may have to replace the axle pin (included), but I did not have to do that. My 25 year old mountain bike attached fine the first time. RECOMMENDATION: Do not rush this step or you may find your bike slipping out of the trainer frame and you flying across room on your moving bike!. (C) A front wheel stabilizer IS included. Once my bike (with 26" mountain bike tires) was attached in the trainer frame, the front wheel sat 3" above the ground and the real wheel sat about 2" above the ground. I am using this in my basement with 7' ceilings and still have headroom when I ride. (D) Noise. Its not silent, but I would not describe it as "noisy" either. I would compare the noise to that of a someone using a vacuum cleaner on the floor above you. Its more of a "drone" or a "whir". Pitch varies with speed and - for me - at a low-moderate speed the noise definitely gets more pronounced, but is less so at low, moderate, and higher speeds. My trainer sits on a "commercial" type carpet that you'd find in an office building. To say one needs "noise-cancelling headphones to watch TV while riding" seems way out of whack with what I am experiencing. (E) An adjustment dial can be attached to your handlebars, nut it does not do much (I'll agree with that!) but - once I set the base resistance using the nob at the back of the resistance wheel (while I am off the bike), I am able to use my front and rear derailleurs to adjust resistance somewhat (its not as pronounced as when you are riding on the road, though). You can then use adjustment dial to make small resistance adjustments within a gear (if that makes any sense). NOTE: I used 2 or 3 small Velcro straps to attach the adjustment cable to the frame. This is not necessary if you plan on using your bike in- and out-doors, or moving the bike between uses...but I plan on keeping it where it is until spring/summer, so the Velcro just keeps things tight and tidy. (F) The workout: Call me Captain Obvious, but the higher the resistance you set initially will determine how hard you work. I'm still playing with it to find the right setting. What feels "right" at first may be too tough to sustain. My first workout kicked my butt. You will likely find yourself making many small adjustments at first until you find your "sweet spot" BOTTOM LINE: Looking for a budget bike trainer, this is the one. There is nothing out there less expensive than this. Its sturdy AND it does the job. Are there better, quieter, more feature-rich units out there? Sure...but a 2 or 3 times the cost, or more! If you are looking to buy an inexpensive indoor bike trainer to help lose your COVID-15, this is definitely worth the investment, IMHO

First, as stated in the description, it can get a little noisy if using high thread tires. It kind of sounds like a kid's wind up toy or siren. I found it to be tolerable, but it's something to consider if living at apt, or if intended use is at night. The entire unit was fairly easy to setup once I got past the quick-release issues (more on that below) and it's quite easy and quick to put away and set up again. The base unit feels very sturdy and the adjustment knows give you good control over the resistance provided to the tire. The only issue was that I initially tried to follow the instructions to install the quick release adapter, but what the instructions didn't say was that they are assuming you already have a quick release wheel (Note: at the time there was no mention of this issue in the product description either). If you don't, you need to purchase an axel to turn it into one. In the end, I had to put everything back together again and tried to just mount the bike using the existing wheel bolts, which fit perfectly. The whole thing was unnecessary, at least for my bike. Seeing that the description now mentions briefly the difference between quick release and bolt structures, they might have made changes to their installation instructions as well. Overall, I'm satisfied with the purchase and would recommend the item.

I bought this for my sister as a Christmas present to train for the PAN mass challenge in Massachusetts. It was so easy to set up and when you want to use your bike, it’s easy to remove it to take your bike outside and use it outdoors. Prior to purchasing this item I read the reviews. A few people stated that it was noisy. My sister and I don’t find it noisy at all. You can hear the tires & the machine turning however you can still have the TV or music on & hear just fine without having it up too loud. It’s light and easy to pick up and move anywhere you want in your home. I would recommend this product to anybody.

I bought this trainer 2 weeks ago, replacing a trainer I'd had 5 years ago. I have to say I didn't think it possible to buy a mag trainer for less than $100 that would be good at all. I was shocked and skeptical at tis price point, but the other reviews made it worth a try, and $35 is hardly a lot to risk. The trainer came in 3 pieces -- assembled frame, mag unit with resistance shifter, and thru axle. It was well packed but wish the mfgr would ship with cardboard stuffing instead of styrofoam (time to rid the world of this stuff). The rack was assembled and required only bolting on the mag unit, with a single bolt that was present in the mount and needed only be pulled out, inserted through the mag unit, then firmly bolted on. I have a Specialized brand bike that did require swapping thru axles with the one provided, a 2 minute job, as my bike's thru axle did not fit well in the two axle mounts. Once done, the bike mounted easily in the axle mount. The axle mount retractors were easily adjusted, but there is a lock nut that needs to be slid outboard to rotate the mount screws (actually, nice, simple design). In use, I find that with modest pressure against the tire (adjustable with a screw on the mag unit, after assembly to the frame) I can ride with the resistance setting at 2 or 3, and my bike in 3+3 on the shifters. I get a good 35 minute workout at 136 BPM heart rate. The mag unit is not unusually noisy - the noise is mainly tire friction on the roller, not the mag unit internally. It is what one would expect, depending on tire type -- mine being a road tire with not much tread. More aggressive treads will be louder as they produce more noise on the roller. I am able to ride with a small bluetooth speaker at modest volume without the mag unit making noise above it. The frame is sufficiently wide that I am stable laterally while riding, but does close easily when moving it (watch fingers!), but totally stable in riding position. A cross bar once the frame is open, to keep it so, might be a nice addition in a future model. Overall, very happy with this unit, it is every bit as good as my previous trainer that cost 4 or 5X this one. Hard to believe this level of quality for $35. I would recommend to anyone.

This was easy to set up with my touring bike with 26” tires. The knobby tires do generate a low roar as described by others’ reviews and the instructions are only drawings. Use the review videos for setup instructions. It was worth the price.

UPDATED 11/16/20: After a month, and a few follow-up emails, I received my free exercise mat! It was well worth the hassle to save $20-$30 since I'm working out on concrete. The mat is decently padded and it's a good beginner mat. As for the trainer, after a month of use, I'm quite pleased with it. I managed to find a block to elevate the front wheel (a must), and I've figured out that the built-in resistance doesn't work. BUT! For what I want, this trainer works perfectly. Quiet enough I can watch shows on my table or listen to a podcast music, and I can use my bike's gears to shift to higher gears/harder workout if necessary. I bought a cheap bike computer so I can log my distance, and 30 minutes is enough to make me sweat. Overall, I am quite happy with my $100 trainer and free mat! Overall, this feels very sturdy and it was easy to put together, especially after watching the video that is included with the pictures advertising this product. It's fairly quiet (I'm using road tires) and I did a quick test ride of about five minutes and was impressed by how much it didn't wobble, which is what I was worried about. I didn't feel a whole lot of differences when I started doing the different resistance levels, but since I'm just using this to stay in shape during the winter, I can live with that. The main reason this is a four-star and not five is because I am missing two parts: the front riser block that is literally in the name of this product configuration and the adapter for the rear wheel. Thankfully, for the second item, my bike is able to work and fit into the holders without it, but I am disappointed about the lack of the front wheel riser block. I'll be able to find something else like a 2x4 or something so that I'm level while I'm on the trainer, but I even contacted the manufacturer and they said that they didn't have anymore? It seems very weird but I'm still able to use it so whatever. Also, for full disclosure, a good portion of why I'm submitting this review is that the manufacturer has promised a free exercise mat if you submit a review. I've seen others mention this and report they haven't gotten theirs. I'm going to try and get one, and if I do, I'll update my review.

Excellent purchase during snowy winter months of Michigan, when my bike is sitting at a corner and collecting dust. Took 5 days to deliver, which isn't bad considering we are living through a pandemic right now. I am a DIY person who has put together many pieces of IKEA furniture and other items with good instructions and tools. All the appropriate tools come with this assembly, but the instructions were pictures only with no written narrative. Overwhelming at first, but then with a little extra resolution, and after laying out all the pieces and studying the photos in greater depth, it only took about 15 minutes to actually get it all together! It is super sturdy. Very pleased and excited to be able to exercise and put my bike to work, instead of sitting idle. The only downside is the noise (giving 4/5 stars rating because of that). Since I own a mountain bike with fat tires (as you can see in the pics), the noise level is similar to someone drilling into the wall! My cardio routine usually lasts 30-45 mins, so planning to replace my rear tire with a trainer tire, before my roommate kicks me out or my downstairs neighbor starts complaining. Tip: Make sure that the bolt that pushes the roller against the wheel is seated correctly on the roller, then you can tighten it until you can see pressure on the tire.

Pros: - It is very quiet (though I have treadless street tires). - Easy to assemble. - Very sturdy. - compact and easily storable. - Great quality for the price. - Quick release, and quick mounting. - It's great to train on your personal bike! You don't have to go from a trainer bike to your road/mtn bike and experience the ergonomic changes. -The tension cable is easy to install and remove and stays out of the swing of the pedals. Cons: - It is sensitive to adjusting the tension of the motor to your tire to accurately get a true 0-8 load (I'm still experimenting to get it right!!!). Watch tire pressure too - if that fluctuates, it will also mess with your motor tension. - If you will be taking the bike on and off the trainer you'll have to adjust the tension of the motor which again, takes time and may be different from the 3 you rode yesterday to the 3 you'll ride today if you dismounted the bike. However, I would figure that any floor trainer that you mount and dismount your bike to would be like this. - The 2-inch lift may make it difficult for "less agile" people to mount the bike, it will be sturdy enough to handle your weight while you mount the bike one pedal at a time. - The instructions don't make the set-up clear... I recommend watching the video in the Amazon description. Especially to understand locking the clamps in place before you ride!!! Overall, it's a great trainer that will last a long time and will be suitable for beginners and experts!

Rápido y fácil armado. Muy buena estabilidad. Mucha eficiencia y eficacia. Excelente relación precio-utilidad. Muy buena apariencia. Lo recomiendo ampliamente.

Cumple perfectamente con lo deseado.

When you put the bike on the trainer and start your workout the bike in moving

I couldn’t be happier with the BalanceFrom Bike Trainer Stand! It’s an absolute game-changer for indoor cycling. The stand is sturdy, made of high-quality steel, and feels incredibly stable even during intense workouts. The magnetic resistance works smoothly and provides a range of levels to customize my training. The included front wheel riser block is a great addition, ensuring proper balance and comfort throughout the ride. Assembly was straightforward, and the foldable design makes it easy to store when not in use. Plus, it’s relatively quiet, so I can use it without disturbing anyone in the house. This trainer stand has allowed me to keep up with my cycling routine, rain or shine, without the hassle of going to the gym. For the price, the value is unbeatable. I highly recommend it to anyone looking to stay active indoors!

I bought this Bike Trainer when it was on sale to use indoors with my first road bike I bought last year. First time I’ve ever used a Bike Trainer, but so far I’ve been quite impressed! Set up: fairly straightforward to set up. No English instructions, but the diagram was helpful and came with the needed tools. I did have to google how to replace my rear wheel bike skewer with the one included, but if you have a quick release tire, it’s actually quite easy. Lots of tutorials on YouTube. Usability: the design is intuitive so it’s easy to understand how everything works. It comes with a dial to clip onto your handlebar to increase or decrease up to 8 resistances for your rear tire. I’ve noticed it tends to get a bit noisy the further you tighten the roller into the rear tire, but I’ve be been leaving it a bit loose and it seems to work fine without much noise. Overall value: good product, sturdy, foldable when not in use, comes with a separate front piece to rest your front wheel on (usually sold separately). When on sale, it’s one of the cheapest options out there. So far very satisfied.