Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad Apply to LED, IGBT IC Chip Computer CPU GPU Modules MOS Tube SSD Drives

Has worked well and held on nicely. I used this tape to mount a heat sink on one of my Nooelec NESDR RTL-SDR dongle to try to keep it cooler. The tape and heat sink work great, unfortunately, the Nooelec NESDR dongle is just flakey in my opinion. Apparently, the issue was not thermal related, but at least now I know what to use to properly mount a heat sink!

I had an slighly unusual use for this but it worked perfectly. I wanted to adhere a stick PC to a marble window sill. The stick PC is fanless and the case serves as a heat sink. The entire case is grooved in order to help radiate the heat, but reduces the surface area that a still tape can adhere to.I first tried a highly rated name brand double sided tape. It worked initially but the heat quickly softened the adhesive and the PC came loose.Then I tried this tape. This tape was thinner, which allowed me to press the tape into the grooves more. The adhesion is still strong after several weeks.This tape is likely useful in many applications where heat is a factor.

I have been trying to get a hold of a specific rare overdrive chip for my 486 (Evergreen AMD 5x86 w/built-in voltage regulator). The prices for that particular CPU are exorbitant, so I bought the base CPU, a cheap voltage regulator adapter, and I had an old 486 heatsink/fan lying around. I needed this tape to attach the heatsink to the CPU, since the old pre-Socket1/2/3 CPU socket does not have mounting brackets and the CPU's height would be too much for it anyway. The tape worked perfectly. I do not know if it performs very well, thermally, but that's not so important for an old 5x86 chip. It just needs some mild cooling, so this tape was definitely enough. As a result, the CPU stays quite cool.I'd be more concerned with a more modern, high-TDP device. The tape is pretty thick, and it's pretty sticky, so I don't know how hard it would be to separate the CPU from the heatsink at this point. That's probably a good thing, though, since the motherboard/CPU are turned on their side (they are in a tower case) so I need the tape to resist gravity indefinitely. They have stuck together well so far.

Works as advertised.ProDecent thermal transfer for light to medium heat devices. Note, not for modern AMD and Intel CPUs.Adhesive sticks well and holds over time. I recommend cleaning surfaces with rubbing alcohol and let drive before use.ConThe adhesive sticks well to just about anything, but it loves sticking to itself the best. It can be hard to get blue strip off. If it somehow sticks to itself while trying to use, get another piece as it will not give up hold to itself.If it was easier to get the blue strip off I would have given it 5 stars. Even so, 4 stars is easy for me to give.

I wanted a middle-of-the-road size/width on this type of tape, to use with my raspberry pi cluster but also my never ending 3d printer tinkering. Found this tape super useful, good adhesion, easy to cut into whatever size, and for what I can tell, offers good thermal properties. Even use it to add a small heatsink to an HDMI adapter that use to run hot to the touch. Highly recommended.

its good thermal tape

Perfect for my M.2 SSD drives, also good for heatsink to GPU connections and has both a good hold and money value.

Very strong adhesive. I made a mistake sticking an LED strip in the wrong position with this tape and it was very difficult to remove, which is a good thing.

used it to stick on some heatsinks onto some NVME drives and stepper motor drivers , seems to be very sticky and they have stayed on so seems good to me .

Al colocarlo sobre la placa trasera de una GPUs se fijó correctamente y no se ha despegado el disipador, con otras cintas se deshacía el pegamento como chocolate sobre la placa del GPU

I bought an ancient Cisco Catalyst PoE switch for my lab. Great deal but the fan in those things sounds like a locomotive.So, how to cool it quietly? A few experiments and I determined that the fan header would drive a couple of 120mm chassis fans. My thermal gun showed temps stayed below 40C. Perfect.Only thing is, the fans don't fit in the chassis, so I have to run it with the lid off.How to hold the fans in place? You already know the answer!Recommended.

Muy buena idea, nos quita el embarcarnos con la pasta térmica

Best thermal conductivity tape.iam using for vrm heatsink cooling and gpu vrm . It the best tape . Buy this item for vrm cooling