Moen Chrome 54-Inch to 72-Inch Adjustable Length Fixed Mount Single Curved Shower Curtain Rod for Bathroom, CSR2160CH

Shower rod looks great! It took about ten minutes to install with the included hardware and is much more secure than my previous shower rod.There are a lot of reviews here which blame the product for issues which would never have arisen if the directions had been read and followed. As with any project, verify that the included hardware is intended for use in your application. This rod comes only with drywall anchors. If you are installing directly to studs, into tile, or into some sort of fabricated shower surround, you will need to buy the correct hardware first.The caps which cover the pole are fairly large. If you plan to install the rod itself flush to the top of the shower surround, it is going to result in caps going above or below where you want them. Find where you want it to actually hang, measure to that point (twice, of course) and begin drilling.With the particular style of shower rod this is (curved) you'll want to install it already assembled. If you do this and you are right-handed, install the right side first. With the curve of the shower rod, you won't be able to easily use a drill gun on both sides. If you do the right side first, you'll be able to easily use the drill gun on those screws. The screws on the left side will have to be done primarily with a manual screwdriver. If you install the left side first, you'll find yourself having to manually screw in the right side with you left hand. Just a tip, YMMV.And one other word of warning. If your home is like mine, the toilet is only a few inches from the bathtub. Keep in mind that the curve could push this thing out far enough to interfere with toilet usage in small spaces. To keep that from happening, I set the install points about 2.5" back from the edge of the shower surround on both sides. That way, with dual shower curtain hangers (hooks which allow for a plastic shower curtain to hang inside the tub and a fabric one to hang outside -but on a single hook) it still leaves plenty of open space inside the tub area, while keeping it from poking out so far as to hit legs of those sitting on the toilet.Long story short, read the instructions before you start and carefully measure how the placement will affect rod components as well as the curtain itself. If you do those things, it will be a quick, easy and sturdy install.

This product was to replace another one that we'd ordered. The other one seemed okay (had high ratings here on Amazon) but the brackets were a different shade of nickel than the rod itself. Returned those and ordered this beauty in brushed nickel. Wow. VERY good quality rod, brackets and hardware. Super sturdy and so easy to install. After reading some of the negative reviews, I can't help but wonder why the complaints? This product is advertised exactly as it is, with hardware for installation into dry wall or tile (4 bolts, 4 anchors). There are NO SCREWS if you are mounting directly into wood, so you simply need your own 4 wood screws. No biggie. We used 2" interior wood screws and voila! The included instructions and template make it a breeze. Make sure to use one of the 2 included decorative end caps to measure and account for their total dimension. The brushed chrome is very pretty and the whole set up matched. 2 thumbs up.

Solid shower rod, which comes in 2 sections and has metal connection points on both ends. It wasn’t hard to install, and in my opinion, looks nicer and has less issues than one of the similar style rods that have an auto tensioner built in. Those are a little easier to install but then you have 2 sections for your curtain rings to catch on. Also, the ends fit over the caps tighter so there aren’t any large gaps. Overall it’s a nice curtain rod.

Overall the shower rod was made with good quality materials. While the installation instructions were easy to follow, the fact that you need to screw this rod into the wall adds a level of complexity. You need to be very certain of your measurements to make sure the rod ends up level. Also be careful not to install too close to any trim (like a door frame) or the decorative end caps won't snap on. A compression rod that also screws out to the proper length is an easier install and easier to adjust height and level.

This shower rod was very easy to install with one helper to support it while screwing it to the wall. It's important to follow the directions and use a level to make sure the marking guide templates are level and plumb to ensure that the curved rod is level when finished. the rod is a heavy gauge metal, and very sturdy when installed. there is a nice attractive finish on the rod itself. I bought the brushed nickel, and it matches my fixtures perfectly.

Easy to install, has templates for the screws. I used stronger anchors for my walls. Looks really nice in my bathroom. Make sure to check measurements for shower curtain. Placed my rod too high and had to buy a longer liner. A great addition to my bathroom makeover!

es de buen material y es muy bonita

This shower rod is very attractive and easy to install. Would buy again

makes tub/shower feel more spacious, looks elegant

This bath curtain rod was easy to install & looks great! It's solid, heavy & adds a bit of space to the shower space since it's curved. Love it!

This MOEN shower curtain rod holds up to its name. MOEN products never let me down and although at a higher price point, it looks elegant & is solid. It adds richness in the gold color & with the curve, adds a bit of extra elbow room in the shower unit itself. Arrived packaged well & in good time.