Sunco Lighting 4 Pack 7 Inch Wraparound 4FT LED Shop Light Fixture, Linkable Garage LED Ceiling Lights, 50W, 6500 LM, 6000K Daylight Deluxe Integrated LED, Prismatic Lens, Flush Mount Hardwired, ETL

Easy installation and very bright

We bought 4 of these and love our new garage lights! They are lightweight, thin, and easy to handle. Much brighter than the 4 fluorescent fixtures that we replaced, and less expensive to operate too! Although we haven't yet used the feature that allows you to link multiple units together, I think its a great idea and I'm thinking of purchasing more of these just to do that! If I had to come up with suggested improvements, they would be these: 1. I wish there were additional mounting holes near the center - if the junction box's holes don't line up in the direction you want to fixture to go, you'll have to drill new holes in the fixture in order to rotate it - not a big deal, but it would be nicer if you didn't have to. 2. There are no punch-out holes in the center of the unit, and that's where you would most likely feed the wiring through. There is a hole, but its small and if you have multiple units tied together in-line, like I do, in total they'll be too wide for that hole, so I had to enlarge the hole with a drill. Not a problem, but still. 3. The ends of the fixture's wires have a rubber-like shrink wrap on them, I assume to protect them. But I saw that as both unnecessary and as being in the way when trying to trim the insulation off the tips. I'd rather the wires already be trimmed, bare, and ready to connect. Again, all those are minor quips - I am VERY happy with my new lights!

I was dreading this job. I did not want to stand on a ladder for two hours trying to find my garage ceiling studs. This product is so light you don't need studs. You simply go to Home Depot, pick out some new generation dry wall anchors and you can hang this light anywhere. Each lamp weighs approximately 6 pounds. They are super light.These things are GREAT. I put four on one light circuit (you can have up to five) and with the flip of a switch my LEDs throw off so much light, I could do dental surgery in my garage. I don't know how I lived with such a poorly lit garage for so many years. Another cool feature of these lights is the dongle that each light comes with. The dongle is about six inches long and allows you to daisy chain your second light in that row, by plugging the dongle into the first light. Wire one light and light TWO. Overall, extremely happy with this product. MONEY WELL SPENT. I am now looking forward to ridiculously long life span on my LEDs. No warm up time either...they are instant ON.

For my five-car garage, I have purchased and installed no fewer than six Sunco 4packs of Wraparound 6000K LED Shop Lights. One 4pack of the 7", one 4pack of the 8.5", and four 4packs of the 11". All three sizes contain the same LED tubes inside: the 7" has two bulbs, the 11" has four, and the 8.5" has not three, like you might think, but two. How that gets you from the reported 6500 LM to 7200 LM, I don't know; more plastic lens to bounce the photons around? Anyway, I've got 24 boxes on the ceiling, with 80 tubes. A lot of light! Pros: All have worked, no returns necessary. I've had the first set in for two months, no problems. The 6000K color is a lovely bright white, just what I want for the garage. Cons: Wiring the first (in the series) is a bit of a pain. I had to tin-snip cut a notch to get the hard wire in. The 2nd-3rd-4th are easy, with the included little cords. My hard-wires coming in are sometimes vaguely visible through the plastic cover, looking a bit amateurish. Which, not coincidentally, I am. The difference to my old 8' fluorescents is, if not night vs day, then gloomy afternoon vs bright noontime. The fluorescents were an ugly yellow, didn't work well in the cold, made a buzzy noise, and the stupid bulbs are a hassle to dispose of. The LEDs are supposed to be less power, but I've put in so darn many, I may have actually pulled ahead. Worth it! One last nit: I could install yet two more boxes, but the 2pack is 5000K not 6000K. What's with that?

I just purchased 8 of these shop lights. I am very impressed with the quality of the product and the amazing amount of light produced. I had 2 problems. First, 3 of the fixtures arrived with one broken tab on the transformer housing. I tried super glue to reattach the tab, but could not get it to stick. I ended up taping it with strapping tape which seems like it will hold. My biggest issue is that there is not a 2" center hole for the wiring. The florescent fixtures I am replacing have a 2" center hole with a supplied white metal cover to close off the hole after wiring. I am installing the fixtures on a very high vaulted ceiling which requires the use of scaffolding. I installed the first 4 very awkwardly by attaching the higher end with a partially screwed in 10" screw and the lower end with a 4" screw to support the fixture below the ceiling and allow me to get my hands above it to connect the wires. I then had to carefully work the wires most of the way into the box and making sure to align the wires to push all the way in when I fastened the fixture permanently in place. This procedure is incredibly time consuming when done on scaffolding.I decided to order a 2" metal cutting hole saw before installing the last 4 fixtures. Since I couldn't find one locally, I will had to wait 4 days for it to be delivered before I could complete the installation.If the manufacturer corrects the identified problems, these lights will be a perfect 5 star product. I still highly recommend them, but order a 2" metal cutting hole saw with them.

I was pleased with purchase of Sunco lights, they weren't the easiest to install holes did not line up with junction box could have been the position I installed them. The body of light is lightweight metal is a little thin but once they are up should be okay. The lights are very bright which is what I was looking for and the reason I decided on buying the Sunco lights.