Question 1

does this really work on windows 10?

Accepted Answer

Yes, this WiFi adapter works with Windows 10, including Windows 10 64Bit OS and 32Bit OS. We have tested and verified this; also, many users have been using this adapter for upgrading their Windows 10 OS with dual band WiFi adapter. In order to do this, you just need to install the latest driver downloaded from BrosTrend official website in the link below; and then plug this USB adapter into the USB port of your PC, and then it works. Please click "More" and then click "Windows" to download the driver in the link below:http://www.trendtechcn.com/Product.aspx?ProductId=322Before you install this latest driver, please make sure you have done the below:1.	Uninstall the current driver for WNA016 installed on your PC; You can uninstall it in "Control Panel" of your PC2.	In case you have installed driver for other WiFi Adapters on your PC, please uninstall it also. Otherwise, drivers for different WiFi adapters may cause conflicts with each other3.	In case your PC have built in WiFi adapter, please turn it off or forbid it. If not, please skip this step.In case you still need other assistance, please send us message and we will be happy to help you.Thanks for your kind attention on BrosTrend WiFi adapter!BrosTrend Technical Support Team

Question 2

Does it work on a cctv nvr?

Accepted Answer

Hello. 
Yes. The Ethernet to wifi adapter should meet your expectation. By using this BrosTrend Dual Band Ethernet to Wireless Adapter, your Etherent-enabled devices can access the Internet via wireless connection.
You need to connect this wifi adapter to your router first, which will complete wirelessly. After setting up, there is Internet access on the Ethernet port. Use a cable to connect the Ethernet port to your device (CCTV NVR), then your device could access the Internet.
In case you need any help, please contact us at support@brostrend.com
We will get back to you within 24 hours.
Best regards,
BrosTrend Technical Support Team
24x7 Hours Technical Support Email: support@brostrend.com

Question 3

How do i put the bostrend ac1200 in "advanced mode".  i don't see how to change the wifi channel, static ip, etc.  i have emailed you, and no reply.

Accepted Answer

The BrosTrend is not a full fledged router. It's a repeater with very limited administration functions, ie. reset password, f/w update, etc. Managing ip addresses (static/dynamic ranges) are done on your router or access point. The easiest way to pair AC1200 to your router is by pressing the 'WPS' buttons on both router and BrosTrend repeater. HTH.  Cheers

Question 4

Will this work with a vpn that requires ethrnet connectivity

Accepted Answer

I use it to connect my wifi internet to an ethernet connection on a Phillips amplifier so I can stream to it and get updates. It works fine. Given all the givens I do not see why not. Just remember since I am not sure about this from your question. This receives wireless and sends it through an ethernet connection, not the other way around.

Best Sellers Rank	#20 in USB Computer Network Adapters
Customer Reviews	4.2 out of 5 stars 6,107 Reviews

BrosTrend AC1200 WiFi to Ethernet Adapter Dual Band Universal Wi-Fi Bridge

Description

Specifications

Common Questions