OR500LCDRM1U Smart App LCD UPS Battery Backup and Surge Protector, 500VA/300W, 6 Outlets, AVR, 1U Rackmount, UL Certified

Very nice product. I was a bit timid buying, because it is a cheaper rackmount 1u UPS. I have a router, 16port switch, NAS, Nuc pc, and a fiber modem hooked up and still getting over 20 mins of battery if needed. I'm very pleased with the purchase and I would recommend again.

I haven't had this long enough to speak about longevity, but what I can speak on is installation and load performance. It was definitely easy to install. There's not much to it. Install brackets, mount to rack, plug stuff in, turn it on. not rocket science. I do like that it's not very deep since the cabinet I have isn't a large or deep model. I currently have a Unifi DMP, a xFi router/modem from Comcast, and a Synology NAS connected to it, along with the cabinet fan and PoE brick for the wifi AP. Right now, the load is only 1 bar, or 25% and the estimated uptime on power failure is 32 mins. That's not bad for a low end rated UPS, so this was perfect for what I needed, as long as it has my back during a real outage. I also like the cover for the power button so it doesn't get bumped by mistake, not that anyone in my house would be in the cabinet besides me. I also like that the display times out so it doesn't stay on all the time, and provides the necessary info I would need from it, at a glance. So if you're looking for a rack mounted UPS for your home setup, this will a perfect fit for you.

Amazing choice from a homelab perspective. I have TrueNas running on an old Z270 setup that's plugged into this UPS. Cyberpower has native .deb packages that get linux systems talking over the included USB cable. I've got this UPS gracefully shutting down my NAS during power outages and doing weekly self tests. Couldn't be happier. Also had a weird burning smell on the first outage event, seems to have been a 1-off event though, as it's worked great for about a year now. root@nas1-z270[~]# pwrstat -status The UPS information shows as following: Properties: Model Name................... OR500LCDRM1Ua Firmware Number.............. BF01806C1G11 Rating Voltage............... 120 V Rating Power................. 300 Watt(500 VA) Current UPS status: State........................ Normal Power Supply by.............. Utility Power Utility Voltage.............. 118 V Output Voltage............... 118 V Battery Capacity............. 100 % Remaining Runtime............ 27 min. Load......................... 81 Watt(27 %) Line Interaction............. None Test Result.................. Passed at 2024/04/22 09:25:16 Last Power Event............. Blackout at 2024/04/16 11:12:40 root@nas1-z270[~]#

Works great for small situations. There are a couple of locations at work with just one or two switches that need to stay on. I'm using this more for power spikes that will only bring power down for a couple seconds. They arrive fully ready to go (it says in the manual to let them charge for 8 hours before you put a load on it. You might want to pick up an "RCCard100" This expansion goes into the back and connects to your network. You can also connect it with the built in LAN connectors, then follow the instructions on how to find it on your network. You can monitor them from an app on your phone, they will even let you know when power goes off for that UPS. The display and power light are nice and bright. The film on the outside did have a smell, but it went away after I threw out the box and trash.

I have a lot of CyberPower UPS units in multiple sizes. I think cause this is rackmount I made an assumption it would handle more than it says. Pushed it close to the limit and endured the evil warning beep. It's nicely made, but if you're going to rely on it for anywhere close to the load limit, don't. Get something bigger. I love CyberPower. I returned this, and got another CyberPower.

Works as described, no problems

Building a home lab means eventually asking yourself what happens when the power blinks. For me the answer was this CyberPower rackmount UPS, and I have not lost sleep over a power hiccup since. The LCD panel is genuinely useful, not just decorative. It shows real-time load percentage, estimated runtime, and battery status, so you always know where you stand before a storm rolls in. The Automatic Voltage Regulation (AVR) is the quiet hero here: it corrects minor power fluctuations without kicking over to battery, which means your battery stays healthier longer. Six outlets give you plenty of ports for a switch, router, NAS, and a couple of Pi-sized devices. Setup is straightforward. Rack mount hardware is included, though it also works fine sitting flat on a shelf if you are not in a rack. The PowerPanel Business software is a free download and provides a clean dashboard for monitoring over your network. A couple of things to know: this is rated for 300 watts of actual load, so map out your devices before assuming it covers everything. It also produces a simulated sine wave rather than pure sine wave output, which is fine for most network and server gear but not ideal for equipment with active PFC power supplies. The three-year warranty and $300,000 connected equipment guarantee make this a confident buy for a home or small office setup.

Great UPS for small deployments.

The CyberPower OR500LCDRM1U Smart App LCD UPS has proven to be an absolute lifesaver for my electronic devices. The sleek 1U design fits seamlessly into my rack setup, providing both convenience and robust protection. The LCD display is a standout feature, offering real-time insights into power conditions, battery status, and load levels. This smart functionality enhances my ability to monitor and manage power usage effectively. The unit's automatic voltage regulation (AVR) ensures a stable power supply, safeguarding my sensitive electronics from unexpected fluctuations. Installation was a breeze, and the unit's compatibility with the PowerPanel Business Edition software makes it easy to customize settings and receive timely notifications. The compact form factor doesn't compromise on performance, and the ample runtime provides me with peace of mind during power outages. The CyberPower OR500LCDRM1U strikes the perfect balance between reliability and intelligence. It's a must-have for anyone seeking a compact and feature-rich UPS for their rack-mounted devices. Five stars well-deserved!

Hace algo de ruido pero me da unos 30 mins para mi router y mi grabadora de camaras de seguridad. Las baterias son fáciles de conseguir y a precios razonables

Excelente equipo, muy buena calidad de los materiales y su funcionamiento de primera, ya probado en un apagón. Un iMac 5k de 27" sólo usa el 20% de su capacidad. Es muy configurarle conectado por usb mediante la aplicación que el fabricante proporciona. La pantalla se apaga convenientemente al poco tiempo de no presionar el boton de información para no molestar visualmente. El único pero es el botón de encendido que tiene un led bastante luminoso que no se puede apagar ni atenuar. Totalmente recomendado.

This Little 2U Rackmount UPS is Amazing! Works Perfect and takes up very little space!! VERY good Battery life of about 40Min with UNV Rackmount NVR 504 , 2 Hard Drives And about 11 Cameras.

A couple of years have passed and it hasn’t failed yet.