SYNCWIRE Product

Very sturdy, easy to install and very discreet. Fits my Samsung S20 easily and allows for the charging cable to be plugged in. Firm grip and the phone just doesn't move, very solid. Very easy to insert and remove the phone from the cradle; it's a simple one handed drop it in/pull out without having to touch the cradle.... Best cradle I've ever owned, I have it 6 months now and no signs of any wear or tear.... Another quality product from Syncwire, their cables are amazing quality too and they are my go to band for USB C or HDMI cables.

I was looking for something like this form long time. The idea of gravity holding feature is fantastic. You can handle it with single hand effortlessly while driving. My previous air went car mobile holder needs two hands to operate and when tried with single hand the mount drops off from the fixing position. This Syncwire Car Phone Holder holds it tight and very study design. It holds phone very smoothly, so it will not damage the phone or its cover.Very reasonably priced and worth every penny. Happy with the purchase.

I did a lot of research and settled for this phone holder, even though magnetic ones take up less space. My reason for this is that I don't like the idea of sticking a magnetic behind my phone, secondly this this looks very good quality and can fit pretty much any phone.The only issue I have is when I use my car navigation my phone can obstruct my view a little, and that's when I take the phone out of the holder.Otherwise, very good quality and happy with the purchase.

The design is very simple to use (it took 2 minutes of fiddling around without looking at the provided instructions) and effective at keeping the phone in the stand. It relies on the phone’s mass to clamp the sides so if for whatever reason your phone stops pushing down on the bottom clamp, it is very likely to fall out. Thankfully that’s unlikely to happen in a car bit worth mentioning. Annoyingly there is no way to keep the side clamps in position but if there were, it would mean the phone cannot be removed simply by lifting it out. You can either use the air vent holder (7mm Maximum width) or the 3M adhesive pad holder. There is a second adhesive pad included if needed. Make sure to twist the swivel knob to tighten once you’ve placed the phone holder section into the section that attaches to the car to tighten the angle of the holder

The product doesn't fit Citroen C3 air vents. The clamp is too wide and too short to reach the plates. You have to use the sticky pad on your windscreen, which is not why I bought this product. It is otherwise very easy to use, since you only need to place the phone in the holders scissor clamp, and its weight clamps it in place and keeps it secure. You lift the phone up to remove.

Very good design, good quality and easy to use, but have to give it only 3 stars due to the fact that it rattles like crazy when phone is fitted! Probably needs a mod to stop it happening.

Very pleased with this phone holder. I admittedly don’t have a lot of joy with these things. I think I may have tried them all. This one is a simple concept but works very well. My only issue was that I couldn’t use the vent mount option I have a Ford Kuga with vertical slats on the vents and although the product says that is this will fit it unfortunately doesn’t. The alternative is supplied which is a self adhesive method.You get an alcohol wipe (x2) and a spare adhesive disc along with the one already attached to the corresponding mount. The adhesive seems to be very good quality, on par with 3m products.The phone sits in the mount and the weight of the device closes the side clamps to hold the phone firmly. There is little to no movement when driving. I am very impressed with this little holder. I have still given it 5 stars although the vent option didn’t need my individual needs as you are given a very good alternative method which some mounts don’t provide.For reference I have an iPhone 11 Pro Max.

Tried and tested a bunch of phone holders over the years, and this is by far the best one I've used to date. I opted for the 3M sticker to a nice flat smooth spot on the dash, and it's super secure. It's a one handed job to put in and take out your mobile. I'm using a large 6.4" screen phone, and it fits great. Also leaves clearance for a charger plugged into the bottom. Bought a 2nd one for my partner after them seeing it in use.

UPDATE: After three years this phone mount is the best I’ve ever owned. I threw away the vent clip and mounted it to my dash with the sticky mount and it never fell off again. There is more plastic than I suspected when I bought it, but the arms that actually hold your phone are black plated aluminum and have held up for years now. I use this clamp literally EVERY DAY and it is still going strong. I know this item is no longer available, but if it ever is in the future, buy it. Just use the adhesive mount instead of the clip.Worst phone holder I've ever bought. For what it's worth, iPhone 11 mounted in a 2011 Mitsubishi Outlander ES. Clip has two tension settings, which is a cool idea but fails in execution. Pic is of it laying in the floorboard of my SUV, which seems to be it's natural habitat. As far as the gripping my phone part goes, that works perfectly. Oh, the zig-zaggy bits that look like they should be aluminum? Flimsy AF plastic. I'm hesitant to glue the other mount to my dash because I'm not sure if the holder will last long enough to make it worth it. I'm honestly not sure I got the same product as the positive reviewers because this mount is garbage.

I've received and tested the Syncwire Gravity phone holder in my car (Seat Ibiza).Because of the way the airvents are build it took some fiddling to make the holder fit properly.But after I got the right angle it felt sturdy enough to hold my Samsung Galaxy S10+.Even with my Samsung Led View Cover still on the phone it could hold my phone in place while driving and did not feel like it could drop my phone anytime soon.The gravity system works really nice holding the phone, and it does not squeeze my cover like some other phone holders tend to do. And because I always have the Led View Cover on my Phone I prefer this phone holder over other models.The only downside is that I sometime like to keep my phone horizontal for navigation apps. This could be done with the Gravity holder, but feels a bit less sturdy.

Le téléphone est bien en place et ne bouge pas malgré les secousses. Il est de plus orientable ce qui est très pratique.

Questo supporto per telefono arriva in una piccola scatola(vedi foto), diviso in due parti ma facilmente unibile, il materiale usato é davvero robusto una plastica dura ed è adattabile a qualsiasi presa d’aria a differenza di tanti altri, in quanto la molletta che si aggancia è regolabile da un piccola levetta che si adatta e si blocca perfettamente. C’è la possibilità di tenere il telefono in posizione verticale o orizzontale senza rischiare cadute grazie ad una buona superficie antiscivolo e a delle alette regolabile che bloccano il telefono perfettamente. L’unica cosa che avrei preferito sono proprio questa alette laterali perchè sono un pó piccole e danno l’impressione che non tengano bene quando si ha un telefono magari un pó più grande tipo il mio iphone x, ma comunque fino ad ora nonostante le nostre strada piene di buche il supporto tiene a meraviglia. In conclusione consiglio pienamente questo articolo per le sue qualità e per il prezzo adeguato.Anche se nelle auto il posto dove mettere il telefono non manca, avere la possibilitá di posizionarlo in maniera da averlo sempre a vista per sfruttare il gps o vedere chi chiama é sempre comodo.Come sempre Amazon servizio eccellente.

Die Handyhalterung von Syncwire ist hochwertig verarbeitet und passt sich verschiedenen Handygrößen sehr gut an. Die Smartphones sitzen fest in der Halterung. Das Einstellen ist kinderleicht. Das Befestigen an der Autolüftung – ich habe es mal an mehreren Autos ausprobiert – funktioniert bestens. Man braucht allerdings Lüftungsgitter zur Befestigung. Perfekt ist vor allem die im Gegensatz zur Saugnapfhalterung endlich wieder freie Sicht durch die Scheibe. Und jeder kennt das Problem: Saugnäpfe fallen im Sommer einfach von der Scheibe ab, das kann teuer werden, wenn das gute Smartphone Schäden abbekommt. Das kann hier nicht passieren. Die Halterung hält gut fest und durch die zusätzliche Stütze ist alles schön stabil. Die Halterung kann man natürlich drehen. Mehrere Fahrten über extrem ruckelige Straßen – hält in jeder Lage bombenfest – großartig.