YIHUA 926 III 60W Digital Display Soldering Iron Station Kit w 2 Helping Hands, 6 Extra Iron Tips, Lead-Free Solder, Solder Sucker, S/S Tweezers, °C/ºF Conversion, Auto Sleep & Calibration Support

I decided to take a chance on this station and I'm happy I did. I had to install a Gulikit joystick in my Xbox series X controller to deal with stick drift. Knowing that those joystick anchor pins will heat sink, I knew the job wasn't going to be quick and easy. That said, I was able to get the job done with this iron. I debated between this one and the YIHUA 939D, but I opted for the 926 because of the "helping hands." The iron heated up very quickly and stayed at a constant temperature. It certainly gets hot enough for this sort of work. I am very happy with this purchase and highly recommend this iron. If you're wanting to save a few bucks and still end up with a solid station, you won't miss with this one. (However, I opted for leaded solder over the lead-free!)

Honestly works great, little arms are helpful. I am new to this so I will say I don't have experience with nicer machines. But for the little kits I've been using, it's been fun! I does have a little heat stability problems when doing more then 6 points in a row

I really like this soldering iron. The variety of tips is an added bonus and the power is there. It heats up fast, usually less than 30 seconds and the "helping hands" are a cool addition, although I don't use them much. I much prefer a decent hobby vice. The arms are such that if you use them, you have to have the base station close to your work, which kind of gets in the way. I really like the sponge location, very convenient. I was able to solder XT90 connectors with 12AWG wires. If you've ever attempted this, it take a fair bit of skill and A LOT of heat. This iron can handle it. For the price, you can't go wrong

My husband does repairs of gaming systems, computer, computers, etc. He recently branched out into doing more complex repairs on them, and he had me order this YOHUA Soldering Iron for him. He’s been using it for a few months and I waited until he had used it enough to be able to give a fair review. He said that it is very easy to use, has helped him complete all the repairs he needed to do, and that he would recommend this to anyone looking for a reliable, reasonably priced soldering iron.

Title may be misleading as this may be my go to and outlast me, but it feels like the right tool from harbor freight that you buy knowing you’ll burn it out but price point makes that fine. I have essential tremor and soldering is getting interesting. I needed something less bulky and quick heating. My traditional separate equipment that doesn’t sleep wasn’t cutting it. The helping hands are great and the unit being all in one allows me to move into tighter spaces with more control. I need to see if there are longer arm's available for what I do but being able to set the unit on top of a case, have everything contained, and use the hands inside the box while changing temp for different connections has increased my efficiency greatly. I use it in an industrial setting and it’s been a very helpful change.

I purchased this back in 2022 and man, it's been fantastic! It's a pretty cheap build, but the unit itself is great. I've repaired multiple boards, built 4 guitar pedals, built 2 preamps, a colourbox kit and a VCA bus compressor with this unit. I've also used it to replace pickups and solder in speaker wire. It's never let me down in the 3 years of ownership. I like it so much I actually recommended this unit to one of my coworkers that's getting into DIY circuit building. I even purchased the desoldering iron. Highly recommended!

great kit for a starter set up i needed to do some small electronics repair and this worked great love the dial on it to get the temperature just rigt and it heats fast as well when you do get it dialed in fits great on my desk as well so thats awesome doesnt take up a lot of space

Okay, let me preface this by stating that I am by no means a professional tinkerer. I purchased this originally to fix my Polaroid folding camera, which worked. Here is my experience with this soldering iron. When I received the package, the instructions were well written and the device itself was intuitive. It was easy to set up, and get started with soldering. I used the default tip that the iron came with pre-assembled, the device heats up within minutes, and was able to heat up the solder wire that it came with fairly quickly. I had to remove a flex cable and the iron was able to remove the old solder easily, the old solder joint was rather big in size so I had a lot of surface area to heat up with the iron. I did what I needed to and I was happy with this soldering station. Now I know, I know, what I’m about to say next was definitely my lack of experience but I do see big flaws with this iron…next I was attempting to repair an HDMI port on a Ps5 and it went badly 😭 this iron unfortunately does not meet the needs of micro-soldering heat stability. I was using Sn63Pb37 wire and so the temperature I needed on my iron was 183c, and I had set the station to 10 degrees above that just to be sure it melted. Well it didn’t and it did, this iron does not provide an efficient method of heat distribution and so some parts of my tips were hot and other parts cooler, mostly the tip itself or any corner/flat part of the tip. I tested a variety of tips and it was the same each time. I could not melt the wire with any part of the tip point, and could only melt it with the metal near the base of where the actual heat element is, so I had to increase the station temperature over hundreds of what is recommended to be able to melt with the tip point. I thought I had it, and would be able to continue on.. except that when I had contact with the circuit board solder joints, the tip would rapidly cool down and so the iron would be stuck in contact with the solder / PCB until it heated up again! I used high quality flux too but it still happened. The tip isn’t capable of providing enough heat, and if it does heat then it can’t consistently heat, leading to the iron getting stuck on whatever solder you’re working with. It also is inconvenient to change tips because it’s screw-on nature, so you have to wait a while before it’s cool enough to touch and remove the tip. Yihua does give you a good amount of accessories, which is nice, but doesn’t make up for its lack of power when it comes to the hard stuff. The power cord is also shorter than I’d expected, so unless you have a desk with an easily accessible power receptacle, then it will be an issue. I can’t recommend this station to anyone who is looking to build up their soldering skills in the long run, but I can recommend to anyone looking for simple big solder joint practice. Just know that this soldering iron won’t be able to provide the power for smaller joints. I give this product a 4/10, you’ll definitely want to go for a better quality machine, if you are thinking of this model as an “everything” solder station.

Very good and works ad described

Om first use itself, poor build quality is evident in all aspects. LED display never tells correct temperature. Knob is fiddly. Helping hands are useless. The holder for solder wire wobbles. NOTHING ABOUT THIS IS GOOD! I was misled by reviews. Takes forever to reach soldering temperature. Is short, GARBAGE. I have borrowed a friends soldering iron that cost him one tenth. On top of that, Why is Amazon selling 120 Volts products in India WITHOUT declaring this upfront!!! This means shelling out THOUSANDS for a good voltage converter on top of this garbage product. WHY???

Just ok

Chinese Crap! Waste of money!!