CERAKOTE® Ceramic Headlight Restoration Kit, No Power Tools, 10 Wipe Kit | Restores clouded, yellowed headlights, ceramic UV protection, 3-step wipe system, no power tools needed

I’ve tried other kits in the past and this is the most high quality and effective headlight restoration kit I’ve ever used! There is a noticeable difference in the light I can see when driving at night and the kit visibly makes the headlights appear newer. It was easy to apply with a step by step video, and the results are impressive. If you have cloudy headlights, this kit is worth every penny.

I do have before and after pictures, but I'm too lazy to upload them. Trust me when I say that the difference is DRAMATIC. It's as if I have brand new headlights! I took them from foggy/clouded to crystal clear, without even that much effort. And with the ceramic coating, I expect they will stay that way. Here are some tips from what I learned about using the kit. 1. If you are careful, and you're not doing the lights on a big truck, and the fogging isn't terrible, you can split the supplies in half and have enough left over to do another car! 2. It's not a bad idea to tape off the headlights through steps 1 and 2 (initial chemical cleaning, and especially, sanding). Even though I did this, I still managed to sand off a thin line of paint right next to one of the headlights. That was entirely my fault. 3. You can't really sand too much. I actually did it twice. Instead of going by the clock (they say 3 minutes per pad), I just told myself I would use the applicator twice on each piece of sandpaper, and then take off the sandpaper to sand by hand a third time. In other words, three passes with each grit, for a total of six passes per light. That worked out well, and it wasn't too hard, either. Just be careful you don't sand the paint on your car! 4. Bring a roll of paper towels with you before you start. I spent a lot of time running back and forth to the house. You won't need the whole roll. I used about ten towels, total. So bring a roll, and save yourself some time. 5. Make sure you set aside an hour to do the job, and another hour to let it cure. That's about how long it took me, and I'd never done it before. I believe I can do it again in under 45 minutes, easily. But you'll still need an hour for the final coating to cure. If it's raining, you won't be able to do this work. Also, you should work in the shade. I don't think it would come out very well if you do it in direct sunlight. 6. You will definitely need a spray bottle, filled with water. A 16 oz bottle would be about right. I used a little tiny 2 oz bottle, and had to refill it numerous times. 7. When they say to keep the surface of the headlight WET while you sand, they mean it! Your work will come out much smoother, and go faster, if you do that. If not, you end up with a gunky mess that you will have to clean off anyway, and probably have to sand some more - so why not spray while you go? 8. Be sure to use those paper towels to clean things around the lights very well between each step. It just makes the job easier when you don't have to worry about ruining your paint with the chemicals, and you get all the sanding glop out of the way, so you can see if you are sanding your paint, and not your headlights! 9. Be sure to REMOVE THE TAPE before you begin step 3 (ceramic coating). Then, use a hair dryer to THOROUGHLY dry out the surfaces around the lights (and the lights themselves) before you start coating the headlights. This last step 3 is crucial to performance, and is why this kit is so special. It takes no time at all to do the work, like rubbing alcohol once on the headlight surface. But the chemical isn't alcohol, and it's very strong, so prepare well - you don't want to have to stop in the middle of the application. Dry out those lights and surfaces first (because the chemical coating does not play well with water, at all)! Then know that putting on that coating only takes about 15 seconds per light. You just coat it once, with 50% overlap, wipe off any of the chemical that's dribbled onto your paint, and then DON'T TOUCH THOSE HEADLIGHTS FOR ONE HOUR! Let them cure, and they will be like-new! Again, this kit is marvelous. If I had known the end result would be so amazing, I would have taken it out of the box much sooner. I am going to do my wife's car next. It really is the best thing I've seen to do this job. Somebody put a lot of thought into this product, and you can tell. Not too much work for an absolutely fantastic end result!

I used this product on a 2015 Toyota Tacoma. The headlights had become so hazy and opaque they may not have passed state inspection. The kit included oxidation removal wipes, wet sanding discs (2000 + 3000 grit) and holder, and wipes to apply the final oxidation protective coating, along with 2 pairs of gloves. I used my own water bottle mister for the wet sanding and a third pair of gloves that were not included. Additionally, towels are all needed to dry water from the plastic on the wet steps. I poured tap water on the work to do any required rinsing. I spent about an hour working outside in the shade to complete the job. The results are outstanding as shown in the after pictures. No before pics available. I highly recommend this product for its affordability and ease of restoring the headlights to an essentially new-looking condition.

The before and after photos reveal everything about this product. Follow the instructions and you'll get fantastic results with it. CERAKOTE deserves more than 5 stars when it comes to quality and customer support. When we used the product for the first time, we messed the final step by not following the exact instructions and it left streaks on the final finish. Although this was totally due to our mistake, CERAKOTE sent us a repair kit that contained step 2 and step 3 items. They sent the kit immediately using an urgent mail service! We were impressed by their professional and courteous customer support. Then, we could fix our mistake as you see in the final result. Lesson learned, follow the exact instructions! All in all, their product is easy to apply and has a great quality.

used this kit on my 2013 Audi Q5 with moderately oxidized headlights. The instructions were clear and easy to follow, and the kit included everything needed to complete the job. I carefully followed all the steps, including washing the headlights, using the oxidation remover wipes, wet sanding with both the 2000- and 3000-grit discs for more than the recommended time, and applying the ceramic coating exactly as instructed. The results were mixed. One headlight turned out very well and became much clearer. The other improved significantly but still has some noticeable cloudiness over the projector area. It’s possible that part of the remaining haze is inside the headlight assembly rather than on the outer lens, but I can’t confirm that yet. Overall, this is a quality kit that definitely removes oxidation and is much better than many inexpensive restoration products I’ve tried. Just be aware that if your headlight has internal haze or heat-related damage, no exterior restoration kit will completely eliminate it. Pros: * Easy to use * Complete kit with all necessary materials * Significant improvement in clarity * Ceramic coating is a nice finishing touch Cons: * May not fully restore headlights with internal haze * Results can vary between headlights even when following the instructions carefully I would still recommend the product, especially for headlights with surface oxidation.

I was honestly surprised by how well this kit worked. My headlights were cloudy, yellow, and making night driving more difficult. The CERAKOTE® Ceramic Headlight Restoration Kit restored them to a crystal-clear finish that looks almost like new. The instructions were easy to follow, and everything I needed was included in the kit. The sanding process took a little time, but the results were absolutely worth the effort. The ceramic coating left a smooth, glossy finish and added a layer of protection. I've used other headlight restoration products before, but they started fading after a few months. This kit feels much more durable, and my headlights still look great after exposure to sun and rain. If your headlights are oxidized or hazy, I highly recommend this product. It saved me hundreds of dollars compared to replacing the headlights and significantly improved both the appearance of my car and nighttime visibility. Definitely a 5-star product!

I really wanted to avoid paying to replace my headlights and decided to give this product a try. The drivers side has had the build up on it for over a year and the passenger side started to look bad probably 6 months or so ago. As you can see from the before and after, both headlights look significantly better. (With the passenger side looking almost brand new.) I will be curious to see how this hold up over time. The after pictures were taken about 18-20 hours after using the kit. The instructions were easy to follow, and it took maybe 25 minutes to do (including taping around the headlights). I recommend having a squirrel bottle to fill with water for the sanding portion.

This Cerakote branch cleaning kit is the easiest way I've ever restored headlights. I've used other products that required power tools to save away the top layers of the headlamp but we're always cumbersome. The instructions were clear and easy to understand and follow. This made my headlights look nearly brand new. The only suggestion I have is this-if your headlamps are severely faded, I'd recommend buying a coarser grit sandpaper for the initial clearing away of the top layer, such as 800 grit, then follow it with the included grit sandpaper discs. Mine could've used a coarser grit to begin with as I could still feel some slight headlamp damage that a coarser grit would've removed initially. This is such an easy process and the results were definitely night and day, as seen in my photos. I give this Cerakote headlight kit a 10/10!!!

Nice and good

I used this headlight restoration kit and the results were exactly as mentioned in the product description. My car’s headlights were yellow and dull, but after following the steps in the kit, they became clear and bright again. The process was simple, and all the required materials were included. The final finish looks almost like new, and the light output has improved a lot. Definitely worth the money and highly recommended for anyone wanting to restore their headlights without replacing them.

Prima produkt

Works.

Très efficace, relativement facile à effectuer avec la video (compter 1h30 en tout avec la préparation), ne nécessite pas de matériel complémentaire si ce n’est du Scotch papier type peinture. Le résultat est bluffant, à voir sur la durée. Prix imbattable par rapport à la même prestation effectuée en garage (100€ minimum).