Snap and Spray Sprinkler System An innovative sprinkler system designed for homeowners, Snap and Spray waters lawns just like the expensive in-ground systems, but at a much lower cost. Installation is quick and easy. No trenches to dig, no pipes to lay, and no expensive hookup to the water line. The unit comes with everything you need to convert your garden hose to a "quick connect and disconnect" point for your Snap and Spray. A handy tool used to determine the correct placement of the Snap and Spray unit comes included. The unit remains in the ground so you don't have to position it every time. You can mow over the Snap and Spray unit when not in use, and it comes with a protective cap that keeps dirt and debris out when not connected to the garden hose. Why Snap and Spray? Waste no more time as there is no need to move the sprinkler for desired coverage. Unit is installed in ground and you can mow over it. Unit driven by water pressure. Just snap on the hose and spray. A digital timer can be added. Easy to install: Dig a small hole. Insert unit. Refill hole with dirt. Attach hose. Save Money. No contractor needed. No trenches to dig. No plumbing connections to be made. No buried pipe to be laid. Conserve water. No missed spots. No over watering. No purging of the system for winter. Unit is self-draining. Easy to Set Up and Use Bury the unit and snap on a hose. (View larger) Covers up to 60 feet at 2.5 GPM with just 25 psi. (View larger) Adjustable radius from 20 to 360 degrees. (View larger) No missed spots. No over watering. (View larger) From the factory, the setting is 180 degrees; however, the unit can be adjusted to cover any radius from 20 to 360 degrees. It can cover up to 60 feet at 2.5 gallons per minute water flow with just 25 psi. Instructions are included to make this adjustment and as well as adjustments for shortening the spray area. While the unit can cover up to 60 feet, if needed the spray can be shortened up to a 40-foot coverage or 20 feet in one direction. Area of coverage using multiple units. Coverage is so good that most yards only need two units (each sold separately)--one unit placed in each corner of the yard. The Snap and Spray unit contains drainage channels so you do not have to "purge" or "blow out" the system for winter. The unit requires a minimum of 25 psi to give you a 60-foot spray area. The system can handle water pressures of up to 60 psi. The coverage is even from the head out, so it is consistent each time you water. Want your hose to connect at a 90-degree angle to the unit? No problem, add a Lazy Bug that allows the hose to lay down on the ground. Just think, once you install the unit you never have to worry about watering your yard again. Everything needed to determine coverage and installation comes in the Snap and Spray kit. Each Snap and Spray kit contains the following: Snap and Spray sprinkler unit Hose connector for quick and easy attachment Safety cap to keep out dirt and debris Easy-to-follow instructions Precision tool for determining the correct location of your Snap and Spray Water Pressure and Area Coverage Pressure PSINozzle BLK/07Radius ftFlow GPMPrecip In/hPrecip In/h 25"322.20.410.48 35"372.70.380.44 45"393.00.380.44 55"413.30.380.44 60"413.50.400.46 What's in the Box Snap and Spray sprinkler unit, hose connector, safety cap, instructions, precision tool
Trustpilot
3 weeks ago
2 days ago
