75mm x 27mm (Outer Dia x Overall Width)

Good fit! Easy to install and almost the same size than the original. A good replacement for the original wheels.

The OwnMy 75 x 24mm Luggage Suitcase Replacement Wheels are a fantastic solution for repairing and upgrading suitcase wheels. These rubber swivel caster wheels are durable and provide smooth, quiet movement. The bearings ensure a stable and easy glide, making my luggage feel like new. Installation was straightforward, thanks to the clear instructions and included hardware. These wheels are sturdy and reliable, handling various surfaces with ease. Overall, they are an excellent replacement option, extending the life of my suitcase. Highly recommend for anyone needing to replace worn-out luggage wheels!

I find it hard to find a suitcase that works for me in every respect. When I do get one that proves itself, I really hate to give it up. On my last trip, a baggage handler managed to knock off half the urethane on both wheels. My suitcase sounded like the bike I had as a kid with baseball cards clipped on to the frame sticking into the spokes. I guess the urethane was somewhat crumbly from age. I decided to roll the dice on a $10bet with these. I can't say they were easy to install, but this is not the fault of the wheel seller. They are just wheels. They provide two axles of different length which likely handle most circumstances. My first challenge was that the original axle wasn't a threaded arrangement - it was pressed or swaged together with the wheel and suitcase's plastic wheel mount structure in between. An angle grinder with a thin cutoff wheel enabled me to shave the head off on the old wheel side and then tap the old axle out with a drift rod that was a little smaller diameter than the axle. The second challenge was that the old bearings were shouldered and that shoulder fit into a recess in the suitcase's plastic wheel mount structure to spread the cantilevered axle load over a broader area. Cylindrical spacers with a unique inside and outside diameter are not that easy to come by, so, given that the angle grinder with cutoff wheel were out and nearby I took another shot. I cut the shoulders off the old wheels keeping the cut face as parallel to the factory face as I could. After de-burring the id and od, I inserted them into the wheel mount structure (cut face inward in the hopes that that would cover up any lack of parallelism) and attached the wheels using the two piece axles provided. I could only get one or two threads engaged with the longer of the two axle sets provided but the seller thoughtfully put blue Locktite on the threads so hopefully they'll stay together under a 20 lb/wheel load(TBD). It was a bit of an adventure and as I write this I wish I had made a video. I didn't know where it was going and at no point did I have or develop high hopes, so I didn't bother with video to even taking pics along the way. Just the finished product. My advice to you would be: Take your broken wheels off first and see there are any complications, before you order them or...just roll the dice.

My son uses the JanSport Driver 8 roller backpack and one of the wheels broke. According to the JanSport website, the wheel size was stated to be 80mm, but when I measured the actual size, it was 75mm, so I decided to purchase this product and it fit perfectly. (But I used original screws.) The original wheels were very noisy, but these new wheels are very quiet and spin smoothly. My daughter also has a backpack from the same brand and would like to replace it with these quieter wheels. It's been about 2 months since I replaced it, but it's been working without any problems.

I like the price, quality and perfect fit of these luggage wheel replacements, however you’ll want to apply Loctite threadlocker to the keep the bolts from backing out due to surface vibration, and the wheels subsequently falling off.

I’m a flight attendant and needed to replace the wheels on my luggage. It’s been almost 2 years with these wheels and they are still smooth as ever! Super easy to install myself as well!

Repaired Travelpro Bold 25" rollaboard. Wheels appear to be good quality and were right size (75mm x 24mm x 6mm axle) - but on the factory wheels there's a small aluminum spacer (6mm core) embedded into the wheel bearings - maybe 3/8" thick and functions to keep wheel off bag/spread load along axle - so important to take up the slack. I removed the old spacers, cut off the smaller shaft "throat" (with dremel) and reused them. Another reviewer up here used a cutoff wheel to do the same thing. You could achieve same spacing with a washer stack (included) if you've got fewer tools laying around. This bag has "replaceable" wheels, so I just reused the axle screws. Pic 1 is the blown wheel showing opening spacer throat drops into (which had disintegrated - if you look closely you'll see the smaller 6mm opening on the outside bearing); pic 2 is a closeup of the (modified) spacer on the axle screw, pics 3 and 4 are the new wheel installed, with spacer to inside of bag. Bag is 6 years old and has seen LOTS of use. Hope that helps - I was getting sore from all the "fixed my (unspecified) suitcase" reviews - and couldn't find any specific to this bag - so here' ya' go if that's why you're up here. I'll update if the rubber fails prematurely - but the bag certainly rolls better than it did with a blown wheel - so $10 investment to keep the bag going another year or two -

great fit, inexpensive fix! In a previous life I was a road-warrior and racked up significant air miles... in the course of those travels I have an older (but still very functional) TravelPro rollerboard that the wheels literally fell off - one developed a flat spot, the other simply disintegrated. Nonetheless I continued to pull that through airpots for a couple years all while looking at the airport shops for replacement wheels - and all those shops wanted to do was sell a "new bag". I found these replacements, popped them in in roughly 10 minutes, and my bad rolls like new. THe fit is excellent, they roll smooth, and no longer does my "square wheel" click at every rotation like I'm pulling my bag across cobblestones - its silent!

Prodct matched description. However I order the wrong size by mistake. While initially i had to pay shipping and restoking fee, this was promptly refunded in full when i sent an evaluation.

いい商品です

Noice

Bearings on wheels better than I thought

My 15 year old High Sierra wheels finally let go after the rubber hardened and deteriorated. Measured the wheels and the axles up after removing the bad ones and all of the measurements matched to these. Delivered the next day and fitted perfectly. Very Happy...!!