Factory Style SRT Spoiler Compatible with The Chrysler 300 2012-2020 Painted in The Factory Paint Code of Your Choice 563 PAU

Exact paint color and easy installation. I used the holes and screws. There’s a video on YouTube with the exact spoiler also.

As noted by other purchasers of this product, the color was a perfect match. Also, I took the advice of others and purchased my own double-sided tape. I used the Gorilla brand tape, which is about as permanent as it gets. I tried to mask the sides as a way of marking the alignment for myself, but that didn't work all that well, as it's so wide, you can see the sides as you're placing it down. I don't know the best way of maintaining the desired alignment. I tried to come up with something that would work but I still installed it about 1/16" off of center, which wouldn't be noticeable to most people, but I know it's there and will never be 100% satisfied as a result. I suppose what you could do is very gently rest the spoiler in the place that you believe to be centered, then stand back a few feet, then several feet back and if it looks good, then give it one more second glance at the left and right edges of the spoiler to ensure they're about equal, then press down hard to secure the tape. I will say, that even though I didn't place it absolutely perfectly, I love the look of this and how it makes the body style look more sporty - especially given that since I bought the car used, I had no choice as to how the body trim would look.

Had this wing over 1 year now exactly and I’ve got nothing but good things to say, the build is very sturdy and secure with the bolt on design. Do not go for a 3M tape only wing since those will FLY OFF!! Super simple and easy installation with common sense and a little help! The paint is also perfect match to my cars OEM paint which is honestly such a big bonus since it’s an EXACT MATCH!! I’ve gon thru many car washes and still haven’t seen any major scratches on the paint so looks to be a very good quality one! I highly recommend.

Super easy, perfect color match, and amazing quality. From having body shop experience the install was quite easy. I used both screws and tape for mounting. The tape should be used either way you go but using only the tape will be fine. Just make sure to prep the surface and clean with rubbing alcohol or lacker thinner to make sure the tape sticks to the panel really well. It does come with 3m double sided tape which I thought was super nice cause it’s really good stuff. 10/10 recommend.

After 3 months of waiting for the weather to cooperate, I was able to installed the Spoiler on my Chrysler 300C. I did not drilled any holes on my trunk, and therefore I didn't have the need for the kit that comes with the Spoiler. Instead, I purchased two rolls of 3M double sided 30lbs adhesive tape from Lowes and it has been perfect. I have gone through two high pressure car washes, and done steady 70MPH trips without seeing any issues. However, I purchased a cleaning product that removes grease and wax, but does not do any damage to the paint. I also wiped the base of the spoiler with rubbing alcohol to remove any finger print grease residue. The color of the spoiler is spot on to the color of my car. It’s a perfect match. I installed it while the weather was in the mid to high 50s for better adhesive results. Will post an update in a few months to follow up with installation results after. I most definitely recommend this company and product so far. The spoiler has exceeded my expectations and when I took it to the dealer, they thought it came like that from factory. Will purchase from them again, if they have any other products I need in the future.

Looks nice, adds character, really good all around. Just make sure you bolt it down. Never trust the tape on anything. If its scary fir you to drill into your car, have someone reliable and insured do it for you.

First one I got had a small chip in the paint, second one sat a little high on drivers corner.. I predrilled the holes for the first and it sat perfectly the second spoiler sat a little high on drivers side, so I know the second was a defect., don't let them tell you that it was not installed correctly... I used the gorilla tape ordered on Amazon, and also bolted the spoiler, wish I took a pic, I made 3 rolls using the gorilla tape, so the entire underneath section would be adhered. I used a hole puncher that you would use to punch holes in paper, to make the holes for the bolts to go through and. Used just a bit of lock tight on threads, u don't need them super tight just snug.

Great product, put this 2 years ago and still strong on my car. Never move . I ll buy it again.

It came in a well packed box and wrapped so it doesn't get damaged. The color match is amazing Fits perfectly, u can either bolt it in or just use the double sided 3m like I did (because why would want to put a hole in my trunk) Anyways I was very happy with the purchase and it definitely changes the look of the car

Very happy with the SRT tail fin for my Chrysler 300. So easy to order and had zero issues installing it. It fits tight and the colour match was perfect. If you take your time and READ the instructions provided to you by the supplier I found it easy to install.

Perfect color match, no scratches or dents, it was easy for me to install and looks great on my car.

Product exactly as advertised. Would recommend to anyone....

best purchase ever matched perfect and fit. if you want this item get it you won't regret it. received it in 3 days fast shipping.