EZDIY-FAB 12V to 5V RGB Converter, 3-Way Splitter, SATA Connector, 50 Color Modes, 100x 5V LEDs

GENERAL INFORMATION In my PC, I had a proper mess of cables - some all over the place. The majority were my ARGB fans, because my motherboard only supported RGB. Fortunately, this hub exists! PROS - Simple to hide in the PC. Put in the cables (ran through a splitter for me) and boom, it’s RGB. - It would be hard to mess up installing this. The documentation is straight forward and provides all the needed details - if you need it. - Long lasting. Already had mine for 3+ months with no sign of ware. CONS - May require a splitter in order to connect everything, unlike, for example, a commander, which includes many RGB slots. However, the product still does it’s job. CONCLUSION As much as I wouldn’t recommend trying to convert ARGB fans into RGB, if that is what you desire in your build, this product manages the job flawlessly. Good product, very cheap. Worth it, 5/5.

This was a super easy install basically plug n play, and as soon as I tested the fans just by powering on the pc it automatically synced. I was using this in order to connect my asus rog strix lc360 rgb aio because I didn't have another 3 pin connector on my motherboard and this easily resolved my issue and my pc looks amazing! Low quality material for the hub however, it is a quick solution that is budget friendly and super easy that my grandma can do it! I will keep this review updated in order to continue to explain the longevity of this solution but until then I am giving this product a 5 star review because I am extremely happy with the result.

This product is awesome! My MSI B550 Gaming Gen3 motherboard didn't have 3-pin RGB but had 4-pin RGB support instead, and this converter made it possible so I could use this specific RGB device. Plus, I can control the RGB toggles with the converter/controller instead of bothering to download external software.

Very easy setup, fits practically anywhere(no sticky tho), & light cycles are unique and simple. works very well being small. (does come with the connections) you either have the option to connect to the 12v on MB or leave as is using built in light cycles. NOTE: when using built in light cycles & and have it set on a certain color light & turn off PC. after turning back on it resets back to a rainbow cycle. I also have it connected to RESET button and helps cycle through colors but have it connected to MB to use MB software lighting.

I bought 2 other brands until I finally ponied up and got two of these.

I just bought 9 new fans for my pc and needed a header for the rgb to work. I hooked this one up and 8 of the 9 fans lit up (one fan was faulty) After about 5 minutes the fans rgb suddenly glitched and turned off. I restarted the pc to no avail. I examined the this product which no longer lit up blue. The header didn't work at all anymore. It was completely dead after 5 minutes of use. Will be returning.

So it took a little bit to get this thing working, but once I did I'm very happy with it actually. I have an MSI x470 Gaming Plus, which only has 12v 4pin RGB headers on it. I connected the power to a SATA cable, connected the other to my motherboard RGB header and then connected my aRGB devices (Phanteks Halos Luxe Digital) to the 3pin splitter. Voila, it works! However, here's where I think a lot of people may find this review useful. I wanted to use one of the preset lighting effects of the RGB converter and it kept just defaulting to my motherboard's lighting. I opened my glass panel, pressed the button and it switched to the desired effect. Then when I rebooted, it would be back to motherboard settings. I was NOT going to do this every time I booted up, so I opened MysticLight and tried playing around with the settings. MysticLight for my motherboard only had basic lighting settings so I couldn't do any lighting effects except solid color with a breathing, flashing, etc effect on it. The RGB hub does not do "breathing" effects well. When it breathes, it just kinda flickers and shuts off, then comes back on again. So I had a thought... if this adapter has preset lighting effects and I only want to use those, why do I need to connect it to my RGB header at all? I disconnected the 4pin rgb cable from the header (but obviously kept the SATA power connected) and the hub finally would remember the effect that I wanted. The reason I gave this 3 stars is because there's really no way to attach the hub to your computer. Many of the other hubs have a magnetic back or something, but this I had to zip tie to the bottom of my case (I have the product circled in my image). I also found that the 3 pin connectors on the splitter were really flimsy and bend/detach easily. After I connected the RGBs to the hub, I actually put electrical tape around the connector because the male and female connectors ripped apart from one another and bent one of the pins when I was trying to do some cable management. Other than that, it works as intended! TLDR: - When connected to motherboard, it defaults to motherboard lighting settings - Using MysticLight, there aren't any cool effects, and the "breathing" effect does not work properly - IF YOU WANT TO USE THE HUB'S BUILT IN PRESETS... DO NOT connect the 12v 4pin to your motherboard RGB header - I recommend electrical taping the connections together from the 3pin splitter to your RGB devices, as it is flimsy and doesn't stay together well. Hope this helps someone else looking for RGB/aRGB solutions for their PC!

I am very new to PC building, and I was taken aback whenever I ordered 5 5V RGB fans for my first PC build. Although this might not seem like a problem to many, it was for me as I had a TUF Gaming X570-Plus motherboard which come with 12v RGB headers. As many will say, RGB is not essential for a PC, but of course everyone wants their PC to look the best so I wanted to include that in my build. I searched forums and manuals to see what a workaround for this would be and I came across this 5V-12V converter. It is very simple to setup. All you do it hook one end to your PSU, one to your 5V fan controller/fan and the other to the 12V header on your motherboard. I can speak for myself and the UpHere fans I bought that this product definitely works, and I do not see it as a problem for any PC builders trying to find work arounds based on their specific setup.

It's working my motherboard smoothly value for money easy installation

Se sincroniza facil al aurasync, todo muy bien

works well with my MSI B450 board and thermalright CPU cooler! No issues as of yet but it was more or less straight-forward to install.

Faz o que diz que faz

Los colores son iguales a los que se pide, sin embargo no funciona si quieres personalizar con el 'aura creator' pero si con lo demas