Amazing Drapery Hardware- Hold Down Plastic Bracket for 2 inch Horizontal Blind- Pack of 10 - Clear

Used to hold down an accordion style pull down blind, that for $50 from Lowes should have included these....They work great, are just the right length to hold the blind away from the door slightly. Positioned properly, they have a little "point" on the tips that hold the blind, but can be popped off easily to retract it.I did use random small screws I had laying around. They stripped out so one is not as secure as I'd like. They only way to remove is to break the holder and use another screw due to clearance. Bummer.

I bought these hoping they would work for our faux wood blinds on our back door. The hold down brackets we had for our blinds were broken and blinds kept swinging around every time we opened and closed the door. The blinds were starting to damage the door frames and the wall and I couldn't find hold down brackets for faux wood blinds anywhere!! These Work great! very easy to install and they fit just right!! No more swinging blinds!

I've had these blinds clips break at least twice. The fist time I looked for them at the Home Depot I bought the blinds, and a woman ripped open a box and handed a replacement to me. I did not think I would get that again.Yes, they are not the size as the originals, you need new holes. I tapped a starter with a 2" nail and screwed them in. You don't get screws, big deal. If you have ever replaced door hinges you likely have a pile of screws rolling around. I opted for a bigger screw that the original clip.An yes, pin on these clips is longer and fatter than the original. Get out a knife and widen the hole (It seems to be not deep enough, the next time I replace I might snip the end of the pin off.These are thicker plastic that the originals and feel a bit stronger. Still, plastic. The door takes a lot of force being opened and closed. But now I have a bag full of replacements.

A little larger than the stock ones but do the same job. Easy install and holds the blinds like they should.

These do not fit as exact replacements for Levelor blinds. The pin is too large so you have to drill out the hole in the blinds. The mounting holes are not the same so you will have to re-drill your door mounts. Brackets stand out further from door than originals which actually is a good thing. Do not come with mounting hardware, screws. Ok replacements but be prepared to make modifications for them to work.

I often take a chance finding an odd thing or part, on Amazon and I am often amazed! Who knew one could buy these little plastic things to hold a mini blind to an entry door? Yet; here it is! Very inexpensive too. Drill a pilot/starter hole smaller than the screw you are using, put this part on the blind first to line it up, mark for the holes, drill and screw it on. Easy! You may have to enlarge the hole for the pins so you can open and close the blind.

Yup, pretty simple, does what it says.ALL LIVES MATTER! DO NOT BE A RACIST! JUDGE PEOPLE BY THEIR CHARACTER AND NOT BY SKIN COLOR!

I was really happy to find this set of 2' inches horizontal blind holder, but the 5 pairs are too fragile. Two broke just installing them and they do not really maintain my blinds so I am going to buy metallic ones. You cannot return them in case of you would like too. At the end it is not economical.