Saris Hatch Huggers Bike Rack Accessories – Custom Fit Solutions Trunk-Mount Racks

I'm not struggling with a rear hatch, I'm struggling with trunk seam clearance. I'd tried a 3 bike Bones some years ago but could never get the middle/side anchors to work in my trunk seams without bulging or bending the trunk lid wherever they were placed. The top and bottom anchors were fine, but the side wouldn't go without force/damage. I'm not sure they had these then, but wow they sure work for me now on a 2 bike bones... With the trunk slightly ajar, I place the top anchors on the trunk lid with the rack itself sitting lightly on top. Then I get slack in the side 'Huggers' strap and drop one down along each edge of the trunk lid into the trunk, then I move on and adjust the bottom anchors at the bottom edge of the trunk at the bumper. At this point I shut the trunk. Making sure the 'Huggers' have enough slack to accommodate for the motion without coming out of the trunk, I'll slightly raise the lid and shut it down firmly. I take up the 'Hugger' strap slack to snug the block up against the inner side of the lid, tighten at the buckle and I'm good to go. Everything cinches up tight and the rack is rock solid. I couldn't use this rack, or maybe any rack, without it. Hope this helps!

My wife has a bike rack for her car. Well, she miss aligned the straps end piece causing it to be stuck in the hatchback door frame. I had to chisel and cut the thing out destroying the straps. Luckily, we were able to locate a new set of straps on Amazon. They work perfectly so all is well again in our household. They are a high quality product and appear to be like the original straps.

A neighbor gave me a Saris Bones rack that I wanted to put on a Mini Cooper. This work perfectly for attaching it. They can become a little loose after a long drive, but they seem sturdy enough. It is a little bit of a hassle having to take them off of the rack every time you put it on/off, but I get to have a bike rack in a car not really meant with one in mind, so I consider it a win!

These work excellent. You need these if you have a hatchback with a spoiler. Major plus made in Wisconsin

I bought these straps in case I needed them for the Saris 3 bike rack I bought. They were really helpful for the upper trunk straps. Easy to use. During high winds you might hear extra cabin noise as these straps act like guitar strings. But after stopping to check everything I was happy to continue driving to my destination.

If Saris says you should use these on your car, get them. I thought I could get away without using them with my Saris Bones 2. I probably COULD, but I was risking the normal hooks coming off if I stopped suddenly and the weight shifted forward. The hatch huggers can't come off, not without ripping through the sheet metal of your car. (And they are big and soft so that's not going to happen) They are easy to put onto the Bones straps. Just remove the original straps with the hooks and replace them with these. Takes 2 seconds to swap them out. Once they are installed on the car the rack is super secure and CANNOT fall off the car even if the other 4 straps fail. (You wouldn't want to drive with the other 4 straps broken. The rack will flop all over the place. But it won't fall to the ground. So you'd have time to safely pull over to the side of the road and fix it without having to run into the street to retrieve whatever's left of your bike) I have also found that the Bones 2 rack is easier to install on the car with the hatch huggers than with the metal clips. I can put the hatch huggers onto the trunk first and they hold the rack up while I attach and tighten the other 4 straps. Without the huggers the upper hooks fall off while I adjust the lower straps and it's more difficult to put it on. All in all, for a product I was slightly annoyed that I had to buy to make another product work properly, these have been a very good experience.

ok, this worked out awesome until the rains came this winter. BEWARE my car rear hatch now leaks and im fairly certain the leak has occurred because the integrity of the rubber seal around my trunk window was compromised. I know have mold to clean up all over the inside of my car because the water leaked into the rear tire well....and kept accumulating for months. I now have to have my trunk seals replaced ans my car detailed and cleaning because of the mold! Product does its job and is great but beware of weather conditions and rain after using this.

The Saris fit guide (http://saris.com/catalog/racks) indicated I needed to get these hatch huggers for my Bones 2 Saris Bones 2 Bike Trunk Rack, Black . I was a little reluctant because I figured I could make the hooks work. Well, after doing a test fit, it turns out the hooks would have damaged my taillights, so I bought a set of Hatch Huggers. I fiddled around with these to figure out the best way to mount them. I basically put them where they need to be, droop the straps out of the trunk, then shut the trunk. Next, just pull the straps tight. No problem - and the straps end up just where I want them on the trunk. My only complaint is that they can rub the paint. I know one of the Saris design goals is to "protect the paint" but there's just no way to keep a nylon strap from rubbing the paint as the car and rack move and bounce under load. So I picked up some 3M door edge tape 3M COMPANY 84901 DOOR EDGE GUARD .4 X 10YD , put it on the edge of the trunk where the strap rubbed, and away we went. No paint problems. I think it would be great if Saris included maybe 12" of this tape with the Hatch Huggers.

These are an essential addition to your Saris bike rack if you're worried about the standard straps damaging your car. I purchased the rack knowing that my car wasn't listed as compatible - rear boot spoiler being the main issue, but these huggers solved the problem,. The standard straps were fine but i was worried about the paintwork and the pressure placed on the spoiler. Problem solved! Went for two pairs and used the standard straps as backup. Perfect!

Product was delivered much before the estimated delivery time. Huggers work perfect on the Saris Bones 3, fitted it to my Mazda3 Hatchback 2020.

Use these with my Saris bike rack on a Hyundai Veracruz. Easy to install and saves my spoiler. Great product.

Saris 3935 Hatch Huggers kunnen niet gebruikt worden in combinatie met de SARIS MOCS0074 dakkoffer Solo zoals Amazon wel vermeldt in 'Vaak samen gekocht' !!! Hatch Huggers teruggestuurd naar GB, verzendingskosten €13,05.

Bought these to use with Saris Bones 2 I had just purchased, these worked exactly as they should and I know they will hold the bike rack securely. Delivery was brilliant less than 24 hours on free delivery what more could you ask for.